60-1276-40 Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA
-
PrintPrintlass="init">
60-1276-40 Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1276-40 Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
SpecSpec class="init">
60-1276-40 Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1276-40 Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Recessed (D Frame) (Mounting Hole)
- Surface Diameter: Φ150
- Fluid to be measured: gas or liquid
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~35
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
Order No. 60-1276-40 型番 DU12-150X35MPA 標準価格 JPY: 18,200 USD: 113.24 Excange rate 1USD= 160.72JPY
Valid price in JapanQuantity 1piece 在庫数 
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ アズワン品番 商品名 型番 QuantityQuantityass="init"> 60-1276-40 Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1276-40 Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Recessed (D Frame) (Mounting Hole)
- Surface Diameter: Φ150
- Fluid to be measured: gas or liquid
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~35
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
アズワン品番 60-1276-40 型番 DU12-150X35MPA 標準価格 JPY: 18,200 USD: 113.24 Excange rate 1USD= 160.72JPY
Valid price in Japan入り数 1piece 在庫数
Supplier Stock
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ アズワン品番 商品名 型番 入り数 標準価格 標準価格(ドル) アズワン在庫
[Supplier StockQuotes="init">60-1276-40 Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
NAGANO KEIKI Co., Ltd. 60-1276-40 Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA
特徴
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
仕様
- Type: Recessed (D Frame) (Mounting Hole)
- Surface Diameter: Φ150
- Fluid to be measured: gas or liquid
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~35
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
アズワン品番 60-1276-40 型番 DU12-150X35MPA 標準価格 JPY: 18,200 USD: 113.24 Excange rate 1USD= 160.72JPY
Valid price in Japan入り数 1piece 在庫数
サプライヤ在庫
商品のバリエーション （サイズ違い・スペック違い・オプション品など）
商品イメージ アズワン品番 商品名 型番 入り数 標準価格 標準価格(ドル) アズワン在庫
[サプライヤ在庫]
60-1276-35 Standard Pressure Gauge (AG15-241 x 0.2MPA) DU12-150X0.2MPA DU12-150X0.2MPA 1piece JPY: 13,400 USD: 83.38 
60-1276-36 Standard Pressure Gauge (AG15-241 x 2MPA) DU12-150X2MPA DU12-150X2MPA 1piece JPY: 13,400 USD: 83.38 
60-1276-37 Standard Pressure Gauge (AG15-241 x 2.5MPA) DU12-150X2.5MPA DU12-150X2.5MPA 1piece JPY: 13,300 USD: 82.75 
60-1276-38 Standard Pressure Gauge (AG15-241 x 5MPA) DU12-150X5MPA DU12-150X5MPA 1piece JPY: 15,800 USD: 98.31 
60-1276-39 Standard Pressure Gauge (AG15-241 x 10MPA) DU12-150X10MPA DU12-150X10MPA 1piece JPY: 15,800 USD: 98.31 
60-1276-40 Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA DU12-150X35MPA 1piece JPY: 18,200 USD: 113.24
