60-1276-38 Standard Pressure Gauge (AG15-241 x 5MPA) DU12-150X5MPA
FeaturesASONEs="init">
60-1276-38 Standard Pressure Gauge (AG15-241 x 5MPA) DU12-150X5MPA 【AXEL GLOBAL】 アズワン
Contact us
NAGANO KEIKI Co., Ltd.
60-1276-38 Standard Pressure Gauge (AG15-241 x 5MPA) DU12-150X5MPA
Features
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Type: Recessed (D Frame) (Mounting Hole)
- Surface Diameter: Φ150
- Fluid to be measured: gas or liquid
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~5
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
-
Order No.
60-1276-38
Model No.
DU12-150X5MPA
Standard price
JPY: 20,000
USD: 125.46
Excange rate 1USD= 159.42JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]

60-1276-35
Standard Pressure Gauge (AG15-241 x 0.2MPA) DU12-150X0.2MPA
DU12-150X0.2MPA
1piece
JPY: 17,000
USD: 106.64


60-1276-36
Standard Pressure Gauge (AG15-241 x 2MPA) DU12-150X2MPA
DU12-150X2MPA
1piece
JPY: 17,000
USD: 106.64


60-1276-37
Standard Pressure Gauge (AG15-241 x 2.5MPA) DU12-150X2.5MPA
DU12-150X2.5MPA
1piece
JPY: 18,100
USD: 113.54


60-1276-38
Standard Pressure Gauge (AG15-241 x 5MPA) DU12-150X5MPA
DU12-150X5MPA
1piece
JPY: 20,000
USD: 125.46


60-1276-39
Standard Pressure Gauge (AG15-241 x 10MPA) DU12-150X10MPA
DU12-150X10MPA
1piece
JPY: 21,300
USD: 133.61


60-1276-40
Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA
DU12-150X35MPA
1piece
JPY: 23,000
USD: 144.27

60-1276-38 Standard Pressure Gauge (AG15-241 x 5MPA) DU12-150X5MPA
Features
- The seven digits of the model number (model number) are below the scale mark.
- Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
- The pressure measurement range is wide, and corrosion resistance is required.
- Embedded in the panel and attached with screws or metal fittings.
- When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
- Confirm that the wetted part material is suitable for the gas and liquid to be measured.
- When using for oxygen, please specify that oil is prohibited.
- When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
- The product image is an image. It may differ from the actual product.
- Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
- Only domestic specifications.
Spec
- Type: Recessed (D Frame) (Mounting Hole)
- Surface Diameter: Φ150
- Fluid to be measured: gas or liquid
- Connection Screw: G1/2B
- Wetted Part Material: General Use
- Pressure range (MPA): 0~5
- Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (When the pressure range is 0.1MPA or more for Φ100, Φ150, and Φ200)
| Order No. | 60-1276-38 | |
|---|---|---|
| Model No. | DU12-150X5MPA | |
| Standard price |
JPY: 20,000
USD: 125.46
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| Quantity | 1piece | |
| Stock in Japan |
|
|
| Supplier Stock |
|
|
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
| Product image | Order No. | Name | Model No. | Quantity | Standard price | Valid price in Japan | Stock [Supplier Stock] |
|
|---|---|---|---|---|---|---|---|---|
![]() |
60-1276-35 | Standard Pressure Gauge (AG15-241 x 0.2MPA) DU12-150X0.2MPA | DU12-150X0.2MPA | 1piece | JPY: 17,000 | USD: 106.64 |
|
|
![]() |
60-1276-36 | Standard Pressure Gauge (AG15-241 x 2MPA) DU12-150X2MPA | DU12-150X2MPA | 1piece | JPY: 17,000 | USD: 106.64 |
|
|
![]() |
60-1276-37 | Standard Pressure Gauge (AG15-241 x 2.5MPA) DU12-150X2.5MPA | DU12-150X2.5MPA | 1piece | JPY: 18,100 | USD: 113.54 |
|
|
![]() |
60-1276-38 | Standard Pressure Gauge (AG15-241 x 5MPA) DU12-150X5MPA | DU12-150X5MPA | 1piece | JPY: 20,000 | USD: 125.46 |
|
|
![]() |
60-1276-39 | Standard Pressure Gauge (AG15-241 x 10MPA) DU12-150X10MPA | DU12-150X10MPA | 1piece | JPY: 21,300 | USD: 133.61 |
|
|
![]() |
60-1276-40 | Standard Pressure Gauge (AG15-241 x 35MPA) DU12-150X35MPA | DU12-150X35MPA | 1piece | JPY: 23,000 | USD: 144.27 |
|
