The seven digits of the model number (model number) are below the scale mark.
Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
The pressure measurement range is wide, and corrosion resistance is required.
It is a self-supporting type with a connection part directly attached to pressure piping.
When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
Confirm that the wetted part material is suitable for the gas and liquid to be measured.
When using for oxygen, please specify that oil is prohibited.
When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
The product image is an image. It may differ from the actual product.
Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
Only domestic specifications.
Spec
Type: Vertical (A-frame)
Surface Diameter: Φ75
Fluid to be measured: gas or liquid
Connection Screw: G3/8B
Wetted Part Material: Corrosion Resistant
Pressure Range (MPA): -0.1~1.6
Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
Order No.
60-1264-64
Model No.Model No. class="init">
60-1264-64 Common Coupled Meter (AC20-133 x -0.1/1.6MPA) AT38-75X-0.11.6MPA 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
The seven digits of the model number (model number) are below the scale mark.
Standard compliance seal (type approval) can be used. (depending on size, accuracy and pressure range)
The pressure measurement range is wide, and corrosion resistance is required.
It is a self-supporting type with a connection part directly attached to pressure piping.
When selecting a pressure gauge, select the pressure range so that the upper limit of normal pressure is within the following range to fully demonstrate the performance. (For constant pressure: 3/4 or less of maximum value of pressure range) (For fluctuating pressure: 2/3 or less of maximum value of pressure range)
Confirm that the wetted part material is suitable for the gas and liquid to be measured.
When using for oxygen, please specify that oil is prohibited.
When using for acetylene, specify that it is for corrosion-resistant use and that oil is prohibited.
The product image is an image. It may differ from the actual product.
Please note that the specifications of the listed products are subject to change or discontinuance without prior notice.
Only domestic specifications.
仕様
Type: Vertical (A-frame)
Surface Diameter: Φ75
Fluid to be measured: gas or liquid
Connection Screw: G3/8B
Wetted Part Material: Corrosion Resistant
Pressure Range (MPA): -0.1~1.6
Precision: JIS1.6 grade (according to JIS precision grade) JIS1.0 grade can also be manufactured by your request. (For φ 150 and Pressure Range 0.1MPA or More)
