1-4601-31 Hot Plate (NINOS) 350℃ 170 x 170mm ND-1A
FeaturesFeatures class="init">
1-4601-31 Hot Plate (NINOS) 350℃ 170 x 170mm ND-1A 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
AS ONE Corporation
1-4601-31 Hot Plate (NINOS) 350℃ 170 x 170mm ND-1A
特徴
- High precision temperature control is possible by adopting microcomputer type PID control.
- The display section features a highly visible LCD screen.
- Four timer functions (ON, OFF, ON/OFF, SET) are provided as standard, and the program function can input temperature and time up to 8 steps.
- Dedicated software (CDROM) and communication cable (optional) for data recording and communication make it possible to easily manage data on a personal computer.
- It is possible to control the sample temperature directly by using an external temperature sensor (optional).
- Alarm signal output is provided as standard, and it is possible to stop other equipment or start a backup system in case of an abnormality.
- A safety lamp is provided between the front operation section and the hot plate section (the lamp lights until the top plate temperature reaches 60°C or less).
- The safety device uses a double lock mechanism consisting of two independent circuits.
- It will rise to the maximum temperature in about 30 minutes.
- Top plate temperature distribution width is 4°C (200°C setting) with high accuracy.
Spec
- Model number: ND-1A
- Highest temperature (℃): 350
- Plate size (mm): 170 x 170
- Temperature settings range: Room temperature +10 - 350℃
- Temperature settings: Digital input type
- Temperature distribution width: 4℃ (*temperature distribution width is indoor environment 25℃ (no wind, no load, using internal sensor), Reference value when setting to 200℃. )
- Temperature control system: Microcomputer type PID control system, ON/OFF control system
- Temperature display system: LCD digital display (setting/measurement temperature simultaneous display, heater output bar graph display)
- Internal temperature sensor: K class thermocouple
- Safety device: Self-diagnosis function (Upper or lower limit temperature abnormality detection, heater abnormality detection, sensor abnormality detection), abnormal heating preventive device (thermostat), overcurrent fuse
- Heater capacity: 680W
- Additional function: Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit), Program function: Number of steps/maximum 8 steps, repeat times/maximum 9999 times, Setting resolution/temperature 0.1℃, time 1 minute, Communication function: PC output (USB), External temperature sensor supported, Upper or lower limit temperature alarm, Alarm signal output, Settings value memory function, Key lock function, Auto-tuning function
- Plate material: Aluminum (ceramic coating)
- Size: 240 x 280 x 101mm
- Power supply: 100VAC 50/60Hz
- Power cord length: Approx 2m
- *Demonstration equipment 1-4601-31, 32, 41, 42 are available.
-
RoHS3 (EU)2015/863 Certificates can be issued
[About RoHSAbout RoHSit">
1-4601-31 Hot Plate (NINOS) 350℃ 170 x 170mm ND-1A 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
AS ONE Corporation
1-4601-31 Hot Plate (NINOS) 350℃ 170 x 170mm ND-1A
特徴
- High precision temperature control is possible by adopting microcomputer type PID control.
- The display section features a highly visible LCD screen.
- Four timer functions (ON, OFF, ON/OFF, SET) are provided as standard, and the program function can input temperature and time up to 8 steps.
- Dedicated software (CDROM) and communication cable (optional) for data recording and communication make it possible to easily manage data on a personal computer.
- It is possible to control the sample temperature directly by using an external temperature sensor (optional).
- Alarm signal output is provided as standard, and it is possible to stop other equipment or start a backup system in case of an abnormality.
- A safety lamp is provided between the front operation section and the hot plate section (the lamp lights until the top plate temperature reaches 60°C or less).
- The safety device uses a double lock mechanism consisting of two independent circuits.
- It will rise to the maximum temperature in about 30 minutes.
- Top plate temperature distribution width is 4°C (200°C setting) with high accuracy.
仕様
- Model number: ND-1A
- Highest temperature (℃): 350
- Plate size (mm): 170 x 170
- Temperature settings range: Room temperature +10 - 350℃
- Temperature settings: Digital input type
- Temperature distribution width: 4℃ (*temperature distribution width is indoor environment 25℃ (no wind, no load, using internal sensor), Reference value when setting to 200℃. )
- Temperature control system: Microcomputer type PID control system, ON/OFF control system
- Temperature display system: LCD digital display (setting/measurement temperature simultaneous display, heater output bar graph display)
- Internal temperature sensor: K class thermocouple
- Safety device: Self-diagnosis function (Upper or lower limit temperature abnormality detection, heater abnormality detection, sensor abnormality detection), abnormal heating preventive device (thermostat), overcurrent fuse
- Heater capacity: 680W
- Additional function: Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit), Program function: Number of steps/maximum 8 steps, repeat times/maximum 9999 times, Setting resolution/temperature 0.1℃, time 1 minute, Communication function: PC output (USB), External temperature sensor supported, Upper or lower limit temperature alarm, Alarm signal output, Settings value memory function, Key lock function, Auto-tuning function
- Plate material: Aluminum (ceramic coating)
- Size: 240 x 280 x 101mm
- Power supply: 100VAC 50/60Hz
- Power cord length: Approx 2m
- *Demonstration equipment 1-4601-31, 32, 41, 42 are available.
-
RoHS3 (EU)2015/863 Certificates can be issued
[About RoHS]
-
Package size：380×340×200 mm 4.6 kg
[About Package size]
Order No.
1-4601-31
Model No.
ND-1A
JAN Code
4582110956690
Standard price
JPY: 70,000
USD: 438.79
Excange rate 1USD= 159.53JPY
Valid price in Japan
Quantity
1piece
Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image
Order No.
Name
Model No.
Maximum temperature
Plate size (Width x Depth)
Quantity
Standard price
Valid price in Japan
Stock
[Supplier Stock]
1-4601-31
Hot Plate (NINOS) 350℃ 170 x 170mm ND-1A
ND-1A
350℃
170 x 170mm
1piece
JPY: 70,000
USD: 438.79
1-4601-32
Hot Plate (NINOS) 350℃ 250 x 250mm ND-2A
ND-2A
350℃
250 x 250mm
1piece
JPY: 96,000
USD: 601.77
1-4601-42
Hot Plate (NINOS) 350℃ 400 x 300mm ND-3HA
ND-3HA
350℃
400 x 300mm
1piece
JPY: 135,000
USD: 846.24
1-4601-41
Hot Plate (NINOS) 300℃ 400 x 300mm ND-3LA
ND-3LA
300℃
400 x 300mm
1piece
JPY: 125,000
USD: 783.55
Related Products
Product Catalog
Catalog Name
Page
AS ONE Catalog 2025 [Instruments for Laboratory]
117
/
118
SCIENCE CATALOG 2026-2027
442
AS ONE Catalog 2023 [Instruments for Laboratory]
125
AS ONE Catalog 2021 [Instruments for Laboratory]
75
AS ONE Catalog 2019 [Instruments for Laboratory]
62
AS ONE Catalog 2017 [Instruments for Laboratory]
56
1-4601-31 Hot Plate (NINOS) 350℃ 170 x 170mm ND-1A
特徴
- High precision temperature control is possible by adopting microcomputer type PID control.
- The display section features a highly visible LCD screen.
- Four timer functions (ON, OFF, ON/OFF, SET) are provided as standard, and the program function can input temperature and time up to 8 steps.
- Dedicated software (CDROM) and communication cable (optional) for data recording and communication make it possible to easily manage data on a personal computer.
- It is possible to control the sample temperature directly by using an external temperature sensor (optional).
- Alarm signal output is provided as standard, and it is possible to stop other equipment or start a backup system in case of an abnormality.
- A safety lamp is provided between the front operation section and the hot plate section (the lamp lights until the top plate temperature reaches 60°C or less).
- The safety device uses a double lock mechanism consisting of two independent circuits.
- It will rise to the maximum temperature in about 30 minutes.
- Top plate temperature distribution width is 4°C (200°C setting) with high accuracy.
Spec
- Model number: ND-1A
- Highest temperature (℃): 350
- Plate size (mm): 170 x 170
- Temperature settings range: Room temperature +10 - 350℃
- Temperature settings: Digital input type
- Temperature distribution width: 4℃ (*temperature distribution width is indoor environment 25℃ (no wind, no load, using internal sensor), Reference value when setting to 200℃. )
- Temperature control system: Microcomputer type PID control system, ON/OFF control system
- Temperature display system: LCD digital display (setting/measurement temperature simultaneous display, heater output bar graph display)
- Internal temperature sensor: K class thermocouple
- Safety device: Self-diagnosis function (Upper or lower limit temperature abnormality detection, heater abnormality detection, sensor abnormality detection), abnormal heating preventive device (thermostat), overcurrent fuse
- Heater capacity: 680W
- Additional function: Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit), Program function: Number of steps/maximum 8 steps, repeat times/maximum 9999 times, Setting resolution/temperature 0.1℃, time 1 minute, Communication function: PC output (USB), External temperature sensor supported, Upper or lower limit temperature alarm, Alarm signal output, Settings value memory function, Key lock function, Auto-tuning function
- Plate material: Aluminum (ceramic coating)
- Size: 240 x 280 x 101mm
- Power supply: 100VAC 50/60Hz
- Power cord length: Approx 2m
- *Demonstration equipment 1-4601-31, 32, 41, 42 are available.
-
RoHS3 (EU)2015/863 Certificates can be issued
[About RoHSAbout RoHSit">
1-4601-31 Hot Plate (NINOS) 350℃ 170 x 170mm ND-1A 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@--> Contact us
AS ONE Corporation 1-4601-31 Hot Plate (NINOS) 350℃ 170 x 170mm ND-1A
特徴
- High precision temperature control is possible by adopting microcomputer type PID control.
- The display section features a highly visible LCD screen.
- Four timer functions (ON, OFF, ON/OFF, SET) are provided as standard, and the program function can input temperature and time up to 8 steps.
- Dedicated software (CDROM) and communication cable (optional) for data recording and communication make it possible to easily manage data on a personal computer.
- It is possible to control the sample temperature directly by using an external temperature sensor (optional).
- Alarm signal output is provided as standard, and it is possible to stop other equipment or start a backup system in case of an abnormality.
- A safety lamp is provided between the front operation section and the hot plate section (the lamp lights until the top plate temperature reaches 60°C or less).
- The safety device uses a double lock mechanism consisting of two independent circuits.
- It will rise to the maximum temperature in about 30 minutes.
- Top plate temperature distribution width is 4°C (200°C setting) with high accuracy.
仕様
- Model number: ND-1A
- Highest temperature (℃): 350
- Plate size (mm): 170 x 170
- Temperature settings range: Room temperature +10 - 350℃
- Temperature settings: Digital input type
- Temperature distribution width: 4℃ (*temperature distribution width is indoor environment 25℃ (no wind, no load, using internal sensor), Reference value when setting to 200℃. )
- Temperature control system: Microcomputer type PID control system, ON/OFF control system
- Temperature display system: LCD digital display (setting/measurement temperature simultaneous display, heater output bar graph display)
- Internal temperature sensor: K class thermocouple
- Safety device: Self-diagnosis function (Upper or lower limit temperature abnormality detection, heater abnormality detection, sensor abnormality detection), abnormal heating preventive device (thermostat), overcurrent fuse
- Heater capacity: 680W
- Additional function: Timer function: Setting range/1 minute - 99 hours 59 minutes (1 minute unit), Program function: Number of steps/maximum 8 steps, repeat times/maximum 9999 times, Setting resolution/temperature 0.1℃, time 1 minute, Communication function: PC output (USB), External temperature sensor supported, Upper or lower limit temperature alarm, Alarm signal output, Settings value memory function, Key lock function, Auto-tuning function
- Plate material: Aluminum (ceramic coating)
- Size: 240 x 280 x 101mm
- Power supply: 100VAC 50/60Hz
- Power cord length: Approx 2m
- *Demonstration equipment 1-4601-31, 32, 41, 42 are available.
- RoHS3 (EU)2015/863 Certificates can be issued [About RoHS]
Package size：380×340×200 mm 4.6 kg [About Package size]
Order No. 1-4601-31 Model No. ND-1A JAN Code 4582110956690 Standard price JPY: 70,000 USD: 438.79 Excange rate 1USD= 159.53JPY
Valid price in JapanQuantity 1piece Stock in Japan
Supplier Stock
Product Variations (Different Sizes, Specifications, Optional Products, etc.)
Product image Order No. Name Model No. Maximum temperature
Plate size (Width x Depth)
Quantity Standard price Valid price in Japan Stock
[Supplier Stock]1-4601-31 Hot Plate (NINOS) 350℃ 170 x 170mm ND-1A ND-1A 350℃ 170 x 170mm 1piece JPY: 70,000 USD: 438.79 1-4601-32 Hot Plate (NINOS) 350℃ 250 x 250mm ND-2A ND-2A 350℃ 250 x 250mm 1piece JPY: 96,000 USD: 601.77 1-4601-42 Hot Plate (NINOS) 350℃ 400 x 300mm ND-3HA ND-3HA 350℃ 400 x 300mm 1piece JPY: 135,000 USD: 846.24 1-4601-41 Hot Plate (NINOS) 300℃ 400 x 300mm ND-3LA ND-3LA 300℃ 400 x 300mm 1piece JPY: 125,000 USD: 783.55 Related Products
Product Catalog
Catalog Name Page AS ONE Catalog 2025 [Instruments for Laboratory] 117 / 118 SCIENCE CATALOG 2026-2027 442 AS ONE Catalog 2023 [Instruments for Laboratory] 125 AS ONE Catalog 2021 [Instruments for Laboratory] 75 AS ONE Catalog 2019 [Instruments for Laboratory] 62 AS ONE Catalog 2017 [Instruments for Laboratory] 56
