轻功盖
过滤器
-
-
用于强金属修复材料的稀释剂
它是一种主要由铝组成的单袋型强金属修复材料，用稀释剂稀释后使用。
固化后，它变成金属，可以切割，钻孔和抛光以获得金属光泽。1找到 产品
JPY: 1,900
USD: 11.91
-
-
-
耐热性修复剂金属Patty 200 g 16324
It is a metal repair agent for high heat resistance applications that can be used for metal products such as aluminum and stainless steel products that require heat resistance.
Polishing produces a stainless-steel metallic luster.1找到 产品
JPY: 17,090
USD: 107.13
-
耐化学性衬里材料EC7000AR2加仑 12750
Chemical resistant corrosion resistant lining material with excellent sulfuric acid, hydrochloric acid and nitric acid resistance in two-liquid mixing type.
It also exerts excellent effects on concentrated sulfuric acid and hydrochloric acid.1找到 产品
JPY: 221,566
USD: 1,388.87
-
EC引物2Kg 207061
Primer for EC7000AR, safe zone (AS-150, AS-2500).
Can be used on concrete, mortar, metal and wood.1找到 产品
JPY: 24,963
USD: 156.48
-
-
-
UW450g冲锋枪 16800
Underwater construction and underwater hardening putty.
Filling holes in pipes and other mechanical parts such as flanges, repairing cracks, regenerating corroded parts, and filling are possible.1找到 产品
JPY: 16,056
USD: 100.65
-
-
HR Super 3000 500 g HRS3000
Suitable for repairing areas affected by heat cycles.
Use together with attached glass tape to increase strength at high temperature and pressure.1找到 产品
JPY: 66,311
USD: 415.67
-
-
-
第一组钢垫454 gEA3473 219293
It is a repair agent containing epoxy steel, and it can be cured and restored in about 10 minutes.
For steel, cast iron, stainless steel, concrete, aluminum, copper, etc.1找到 产品
JPY: 9,375
USD: 58.77
-
-
-
不锈钢修护油900 g EA934RX-1
Molding repair of defects, wear, and breakage. Repair of leaks in pipes, tanks and valves. For repairing metals, PVC, castings, plastics, concrete, etc.
Solvent-free type on high-viscosity putty suitable for filling holes, cracks, nests of castings, joints, etc., filling holes, or film thickness lining. (A rubber spatula or a gold trowel will be used for the construction.)1找到 产品
JPY: 30,000
USD: 188.05
-
铁修复油 (耐磨耐冲击) 500 g EA934WC-17
Long curing time and excellent impact resistance.
It hardens in water and on wet surfaces.1找到 产品
JPY: 27,920
USD: 175.01
-
快速修复Glue2 1019
Holes, cracks and chips can be easily and strongly repaired.
If you pour liquid (polymer liquid adhesive) and powder (welding powder) on it, it will cure in about 10 seconds (24 hours if secondary processing is required).1找到 产品
JPY: 7,000
USD: 43.88
-
-
-
多修护油腻子 1161
It does not require any special equipment or technology, just by mixing the main agent and the curing agent, it can be cured like a metal, and it can be easily filled in the hole, filled in the nest, plated, glued and repaired.
After complete curing, holes, threads, polishing, painting, etc. can be added, and since it is an electrically defective conductor, electrical corrosion does not occur even when repair between dissimilar metals is performed.1找到 产品
JPY: 10,500
USD: 65.82
-
高性能耐磨性强化剂NORDBAK 2574389
High performance epoxy resin with large ceramic beads and micro silicone carbide can handle up to 121°C and protect against sliding wear.
It is the type not applicable to poison drama.1找到 产品
JPY: 136,300
USD: 854.39
-
高性能耐磨剂NORDBAK 2604614
Poisonous and deleterious substances are not applicable.
Excellent protection against corrosion and erosion.1找到 产品
JPY: 137,450
USD: 861.59
-
JAPAN DURMETAL COLDWELDING SYSTEM, LTD.
动作套件 BM-025AC
The Velometal Action Kit 250 g consists of two agents each of super rapid and standard types. One is a base agent with a high content of selected special steel and other metal molecules, and the other is an active agent containing a high content of aluminum ultrafine particles.
The chemical reaction occurs when these two agents are mixed well in a one-to-one volume ratio. The Super Rapid product cures in about 3 minutes at 20°C, and the Standard product cures in about 3 hours at 20°C.1找到 产品
JPY: 108,400
USD: 679.50
-
-
-
-
-
-
金属修复用粘合剂 DV10130J
It is putty-like and can fill holes in pipes and other mechanical parts such as flanges, repair cracks, regenerate corroded parts, and plate.
After curing, it can be machined, perforated and tapped.1找到 产品
JPY: 98,349
USD: 616.49
-
-
-
金属修复用粘合剂 DV10710J
It can be filled, bonded and repaired to various equipment.
For making various jigs and taking shapes.1找到 产品
JPY: 10,614
USD: 66.53
-
金属修复用粘合剂 DV11410J
Since it contains aluminum oxide powder and has self-lubricating properties, it is especially effective for dynamic wear.
For repairing worn parts such as machine parts.1找到 产品
JPY: 10,274
USD: 64.40
-
-
金属棒油80g EA934AD-1
Filling dents in automobiles, repairing screw holes in machine tools, repairing pipe connections and cracks, and bonding and repairing various metals. *Does not adhere to difficult-to-adhere materials such as polyethylene, polypropylene, nylon, silicone resin, fluororesin, and soft PVC.
1找到 产品
JPY: 4,050
USD: 25.39
-
金属腻子200g EA934DB-5
If it is even buffed, it will give a stainless steel look.
1找到 产品
JPY: 19,400
USD: 121.61
