TRUSCO NAKAYAMA CORPORATION

分割销大小1.2x20160个

TRUSCO NAKAYAMA CORPORATION

平行针脚 (S45C) 2.0x840个

TRUSCO NAKAYAMA CORPORATION

卷筒针脚尺寸2.0x10182个

TRUSCO NAKAYAMA CORPORATION

对齐针三价铬酸盐尺寸4 mm 120 pcs

TRUSCO NAKAYAMA CORPORATION

E环三价铬酸盐尺寸E-2.0330pcs

TRUSCO NAKAYAMA CORPORATION

E环不锈钢尺寸E-2.0400pcs

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸2X10150个　B16-0210

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸2X12100个　B16-0212

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸2X14100个　B16-0214

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸2X16100个　B16-0216

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸2X20100个　B16-0220

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸3X1080个　B16-0310

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸3X1280个　B16-0312

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸3X1480个　B16-0314

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸3X1660个　B16-0316

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸3X2060个　B16-0320

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸3X2560个　B16-0325

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸3X3050个　B16-0330

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸4X1260个　B16-0412

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸4X1460个　B16-0414

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸4X1640个　B16-0416

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸4X2040个　B16-0420

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸4X2540个　B16-0425

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸4X3040个　B16-0430

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸4X3240件　B16-0432

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸4X3640个　B16-0436

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸4X4040个　B16-0440

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸5X1450个　B16-0514

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸5X1650个　B16-0516

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸5X2050个　B16-0520

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸5X2540个　B16-0525

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸5X3040个　B16-0530

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸5X3230个　B16-0532

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸5X3630个　B16-0536

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸5X4030个　B16-0540

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸5X4520个　B16-0545

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸5X5020个　B16-0550

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸6X2030件　B16-0620

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸6X2520个　B16-0625

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)

TRUSCO NAKAYAMA CORPORATION

波形spr Ring Roll Pin SUS尺寸6X3020个　B16-0630

Simple knock pin that does not require flat hole accuracy.
It is fixed from the inside by the force of the spring working outward. (The applied hole is the same as the nominal diameter.)