SMC Corporation

VM Series　VM130-01-30BA-B

With miniature indicator lamp, it is possible to check the presence of air.

空气喷射脚阀空气开关应力区 (mm2) :8连接埠尺寸:Rc1/4空气

Osaka Jido Denki Co., Ltd.

脚踏开关连接端口尺寸:外径Φ4管单触式接头压缩空气　OFL-AV-S3

It is a foot air valve with a small three-way valve for air pressure control which is equivalent to a microswitch of an electrical device.
Can be used without refueling.

TRUSCO NAKAYAMA CORPORATION

2方向切换阀开启、关闭阀应力区 (mm2) :6个连接埠大小:Rc1/4空气　TP-4P20

It is a 2-port pedal type air valve which is easy to use by turning ON and OFF by depressing.
You can operate it with your hands or feet.

TAIYO, LTD.

脚阀应力区 (mm 2) :6.37连接埠大小:Rc 1/4空气

TAIYO, LTD.

脚阀应力区 (mm 2) :6.37连接埠大小:Rc 1/4空气

手动切换阀8 a夹持式应力区 (mm 2) :18个连接埠IN、OUT:Rc 1/4

SMC Corporation

手动阀 (3个位置/封闭中心) 应力区 (mm 2) :7.5连接埠尺寸:1/4空气

TAIYO, LTD.

手动阀应力区 (mm 2) :7.35连接埠尺寸:Rc 1/4空气

TAIYO, LTD.

công tắc dòng chảy DFS31000AC100V

TRUSCO NAKAYAMA CORPORATION

3向小型切换阀3个连接埠1/8按钮类型　TSV-31B-6

A compact changeover valve that switches the flow direction of air supplied to an air cylinder, etc.
Panel can be mounted.

TRUSCO NAKAYAMA CORPORATION

3向小型切换阀3个连接埠1/8切换杠杆类型　TSV-31T-6

A compact changeover valve that switches the flow direction of air supplied to an air cylinder, etc.
Panel can be mounted.

TRUSCO NAKAYAMA CORPORATION

4向小型切换阀5埠1/8按钮类型　TSV-41B-6

A compact changeover valve that switches the flow direction of air supplied to an air cylinder, etc.
Panel can be mounted.

TRUSCO NAKAYAMA CORPORATION

4向小型切换阀5埠1/8切换杠杆类型　TSV-41T-6

A compact changeover valve that switches the flow direction of air supplied to an air cylinder, etc.
Panel can be mounted.

KOGANEI

机械阀柱塞式微阀系列　KMC

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀柱塞式微阀系列　KMC-2

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀柱塞式微阀系列　KMC-2-11

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀柱塞式微阀系列　KMC-11-60

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀柱塞式微阀系列　KMC-60

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀柱塞式微阀系列　KMO

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀柱塞式微阀系列　KMO-60

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀柱塞式微阀系列　KMP-11

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀柱塞式微阀系列　KMR-11-60

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀柱塞式微阀系列　KMR-60

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀球凸轮式125 B系列　125B-2

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

机械阀球凸轮式125 B系列　125B-11

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

手动机械阀 (按钮式) 125,250系列和2503系列　125HO

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

手动机械阀 (按钮式) 125,250系列和2503系列　125P

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

手动机械阀 (按钮式) 125,250系列和2503系列　125P-2

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

手动机械阀 (按钮式) 125,250系列和2503系列　125P-22

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

手动机械阀 (杠杆类型) 125,250系列和2503系列　125V-2

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

手动机械阀 (杠杆类型) 125,250系列和2503系列　125V-22

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

机械阀辊凸轮式　250C

Realizes control of air system including all air pressure control equipment and drive equipment control.
Direction control valve for switching main shaft by mechanical operation from outside. Various types of operation such as roller cam type and ball cam type are available.

KOGANEI

足式250 F系列 (2–3端口)　250F-2

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

足式250 F系列 (2–3端口)　250F-2-11

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

足式250 F系列 (5个端口)　250-4F

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

足式250 F系列 (2–3端口)　250FL

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

手动机械阀 (按钮式) 125,250系列和2503系列　250P

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

手动机械阀 (按钮式) 125,250系列和2503系列　250P-2

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.

KOGANEI

手动机械阀 (杠杆类型) 125,250系列和2503系列　250V

Realizes control of air system including all air pressure control equipment and drive equipment control.
The main shaft is changed by operating the control valve with hands or feet. Ideal for cylinder control of a jig using a semi-automatic machine or air and for switching the air flow path.