系列海报
过滤器
-
-
-
具吸附力 (N) 的磁性基座调整装置:800 TMA-80
You can fine-tune the holding direction of measuring instruments with the adjuster. (Fine range: 2 mm)
Can be used as a measuring instrument holder.1找到 产品
JPY: 5,726
USD: 35.89
-
磁性基重Strut型吸附力 (N) :800 TMP-80
Since the main column and post are thick, the measuring instrument can be held stably.
Can be used as a retainer for measuring instruments.1找到 产品
JPY: 6,583
USD: 41.27
-
迷你型磁铁底座吸附力 (N) :250 TMM-25
Handy type with small, light weight and 250 N suction.
Can be used as a retainer for measuring instruments.1找到 产品
JPY: 8,520
USD: 53.41
-
激光机吸力 (N) :200的磁铁型微型底座 M-A
Can be set at any angle with one touch.
The magnet section is not ON/OFF.1找到 产品
JPY: 4,629
USD: 29.02
-
-
蛾型人气磁铁底座吸附力 (N) :800 MB1035
Widespread magnet base without slight motion feed.
1找到 产品
JPY: 4,710
USD: 29.52
-
-
夹持式刻度盘尺架吸附力 (N) :800 PH2040
You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.1找到 产品
JPY: 10,220
USD: 64.06
-
大力水手支撑吸附力 (N) :320 PH3100
You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.1找到 产品
JPY: 8,630
USD: 54.10
-
重量等级夹持式刻度盘仪表吸附力 (N) :1000 PH4016
You can adjust the zero point of the gauge immediately with the hand fine motion feed mechanism.
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.1找到 产品
JPY: 18,290
USD: 114.65
-
激光设备吸附力PH微型支架 (N) :150 PH5000
This is a strut type holder that strongly locks the secondary column with a 3-point tightening special clamp.
1找到 产品
JPY: 9,000
USD: 56.42
-
-
具有吸附力 (N) 的磁铁基小锁功能:250 TML-25
Small magnet base with lock function.
Can be used as a retainer for dial gauge, dial indicator, etc.1找到 产品
JPY: 9,746
USD: 61.09
-
Archy Stands吸附力 (N) :500 AM-M
It is a flexible arm stand with secure lock by the patented cam mechanism.
Since the moving part is covered with rubber, it shuts out dust.1找到 产品
JPY: 41,800
USD: 262.02
-
Archy支撑强型吸附力 (N) :1000 ASP-M
It is a strong type that has become tough.
It is a flexible arm stand with secure lock by the patented cam mechanism.1找到 产品
JPY: 49,800
USD: 312.17
-
小型短臂吸附力 (N) :350 AMM-M
The flexural rigidity of the short arm is greatly increased.
It is a flexible arm stand with secure lock by the patented cam mechanism.1找到 产品
JPY: 22,900
USD: 143.55
-
Archy Stands迷你型长臂吸附力 (N) :350 AML-M
The flexural rigidity of the short arm is greatly increased.
It is a flexible arm stand with secure lock by the patented cam mechanism.1找到 产品
JPY: 27,200
USD: 170.50
-
Popeye Flex吸附力 (N) :320 NF1021
Since the gauge's fine motion feed device is located just above the magnet, zero point alignment of the gauge can be achieved instantly without shaking.
The fine adjustment screw can be moved all around so that the gauge can be inclined in any direction by 360°.1找到 产品
JPY: 22,500
USD: 141.04
-
-
-
激光设备吸附力 (N) 的LC微型支架:150 LC6200
By tightening the knob in the center, the three joints are locked tightly.
A mini holder with a round shape and powerful (20kgf) small magnet.1找到 产品
JPY: 16,790
USD: 105.25
-
激光设备的DG支架双微调吸附力 (N) :800 DG6160
By tightening the knob in the center, the three joints are locked tightly.
Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.1找到 产品
JPY: 28,790
USD: 180.47
-
重量等级表盘表夹吸附力 (N) :800 MG61003
By tightening the knob in the center, the three joints are locked tightly.
The tip fine adjustment mechanism makes zero point alignment easy.1找到 产品
JPY: 25,690
USD: 161.04
-
激光设备吸附力 (N) :800的重量级表盘刻度尺支架 MG10503
Since the one-touch hand fine motion feed mechanism is attached just above the magnet, the zero point alignment of the gauge can be made instantly without touching the arm.
The arm joint type holder tightens the knob in the center to firmly lock the three joints.1找到 产品
JPY: 31,500
USD: 197.46
-
瓶子的吸附力 (N) :1300 MA61003
The tip fine adjustment mechanism makes zero point alignment easy.
By tightening the knob in the center, the three joints are locked tightly.1找到 产品
JPY: 46,600
USD: 292.11
-
-
-
-
-
-
激光设备的诺加双微调MG支架 MG6161
Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.
Test indicator and dial gauge holder.1找到 产品
JPY: 50,300
USD: 315.30
-
激光设备的诺加双微调整型NF支架 NF6160
Fine adjustment screws are attached just above the magnet and at the tip of the arm, so you can make fine adjustments in any two directions.
Test indicator and dial gauge holder.1找到 产品
JPY: 27,380
USD: 171.63
-
Magnet Stand (Arm Type) High-Lock Mini Base with Fine Movement Adjuster Adsorption Force 160 N MB-CX-V
Adsorption force (N): 160
Magnet Width (mm): 281找到 产品
JPY: 27,200
USD: 170.50
-
Magnet Stand (Arm Type) High-Lock Mini Base with Fine Movement Adjuster Adsorption Force 300 N MB-PSX-V
Adsorption force (N): 300
Magnet Width (mm): 301找到 产品
JPY: 28,300
USD: 177.40
-
-
Flexible nozzle Holder NHM1
Quantity: 1 unit
Adsorption force (N): 2451找到 产品
JPY: 21,500
USD: 134.77
-
-
磁石基 MB-A2
Since two arms are provided for one base, it takes no space to install the base when performing simultaneous measurement of two points.
Mounting holes are also provided on the side of the base for various measurements.1找到 产品
JPY: 44,500
USD: 278.94
