Tsunoda Co., Ltd.

KingTTC专用工具电缆切割器2孔型　CA-60

Cuts cables (VCT, IV lines, etc.) and strands cleanly with light force.
The CA--22, 22 S, 38 and 60 have cutting blades at the tips, which are convenient for cutting and coating thin wires.

Tsunoda Co., Ltd.

KingTTC HARD WP Multiplier驱动程式3张　KT-606

With convenient shino, it is convenient to open the lid of the water meter box and the lid of the can.
With a platform cutter function that cuts wires.

Tsunoda Co., Ltd.

KingTTC专用工具链解吸刀立式　KT-802-1

With the combination of stepped tip and U/V groove, the roller chain can be installed and removed quickly and surely.
E-type retaining ring (E-ring) can also be installed and removed.

Tsunoda Co., Ltd.

电力金属切割机　PC-1100

Hard wire material cuts easily.
Can be cut with light force using double leverage.

Tsunoda Co., Ltd.

功率端切断器　PC-1200

Hard wire can also be cut.
Blade shape suitable for cutting and pulling out parts protruding from the wall.

Tsunoda Co., Ltd.

KingTTC专用工具扁平型细口弹簧　SNP-145F

The tip is elongated to allow gate cutting without being disturbed by molded products or runners.

Tsunoda Co., Ltd.

KingTTC专用工具圆型细尖弹簧　SNP-145R

The tip is elongated to allow gate cutting without being disturbed by molded products or runners.
Engineer plastic (PC, POM) can also be cut.

Tsunoda Co., Ltd.

三位一体薄型钳子　TM-02

The blade is thinly finished for plastic cutting, so the gate cuts cleanly.
Highly durable three-ply structure without rattling.

Tsunoda Co., Ltd.

三位一体针尖钳子 (凹槽)　TM-03

Suitable for fine machining and cutting wire at the tip.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

三位一体针尖钳子 (凹槽)　TM-04

Convenient for mounting parts where fingers can't fit.
It has a three-ply construction, so it won't rattle when used.

Tsunoda Co., Ltd.

三度曲线刀尖针尖钳子 (凹槽)　TM-05

The tip is bent at 45 degrees, making it easy to hold parts on a table.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

三度曲线刀尖针尖钳子 (凹槽)　TM-06

You can work in places where you can't put your finger without damaging it.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

Trinity Hiraguchi Lead Pliers (凹槽)　TM-07

It has a wide and flat mouth so you can bend metal plates and crush caulking balls and ball tips.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

三边钳子　TM-10

Since there is a blade at the tip of the thin head, it is suitable for cutting work in narrow parts.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

三位一体极细铅钳　TM-13

Since the tip part is quenched, even if it's thin, it won't be sticky.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

三位一体末端钳子　TM-14

It is convenient for cutting and pulling out protrusions such as making wooden models.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

三度锥形 (半平底) 钳子　TM-15

The inclination of the blade is 10°, suitable for cutting closely spaced parts.
It uses a three-ply structure, so it doesn't get rattled when used.

Tsunoda Co., Ltd.

KingTTC专用工具线切割机锁簧　WC-150

The wire breaks beautifully without fraying.
The one-touch opening and closing lock mechanism is convenient for carrying, and the lock comes off easily when you just grip it with one hand.

Tsunoda Co., Ltd.

KingTTC专用工具大线绳切割机锁簧　WC-450

The wire breaks beautifully without fraying.
Wire ropes up to 14 mm can be cut.

Tsunoda Co., Ltd.

皮夹

Tsunoda Co., Ltd.

弯曲弹簧

Tsunoda Co., Ltd.

夹钳夹钳150 mm　TH-150NC

Two PPA resin pads catch the chips.
You can also firmly grasp the binding band and ultra-fine wire of 0.1 mm or less.

Tsunoda Co., Ltd.

槽式水泵钳250 MM　WP-250

This product conforms to the Japanese Industrial Standard (JIS), which is manufactured under strict quality control.
Rust resistant plated finish.

Tsunoda Co., Ltd.

［已停用］POWER通用弹性体夹具　PW-114DG

Compared to conventional products, the distance from the blade point (the point of action) to the caulking point (the fulcrum point) has been shortened, thereby reducing the load (grip strength) during cutting by 30%.
The eccentric lever increases the cutting force compared to conventional products.

Tsunoda Co., Ltd.

［已停用］POWER针鼻夹JIS (偏心杠杆) 弹性体夹具　PW-202DG

Eccentric lever cuts with less force than conventional products.
It is a JIS standard product.

Tsunoda Co., Ltd.

［已停用］POWER多无线电弹性体夹具　PW-212DG

The tip blade can cut copper wire φ0.5.
Can be pinched and cut with just the tip.

Tsunoda Co., Ltd.

［已停用］POWER强力钳子JIS (偏心杠杆) 弹性体夹具　PW-302DG

The eccentric lever cuts with a lighter force than conventional products.

Tsunoda Co., Ltd.

［已停用］POWER硬丝钳弹性体夹具　PW-322DG

With the special blade attachment and eccentric structure for hard steel, it is possible to cut stainless steel wire of φ1.6 mm with light force.
The eccentric lever cuts with a lighter force than conventional products.

Tsunoda Co., Ltd.

［已停用］POWER对角钳子 (3片) 弹性体夹具　PW-351DG

Adopts a sandwich (three-ply) structure that does not rattle when used.
This is a highly functional tool that incorporates new functions and seeks greater ease of use.

Tsunoda Co., Ltd.

［已停用］POWER对角钳子 (3片) 弹性体夹具　PW-352DG

Adopts a sandwich (three-ply) structure that does not rattle when used.
This is a highly functional tool that incorporates new functions and seeks greater ease of use.

Tsunoda Co., Ltd.

［已停用］内圈扣环钳子

Tsunoda Co., Ltd.

［已停用］外圈接环夹子

Tsunoda Co., Ltd.

［已停用］弯曲弹簧