TP GIKEN

试件木板劳安板100件

TP GIKEN

试件橡胶板天然橡胶50件

TP GIKEN

试件试条用带槽容器10件　

TP GIKEN

试片砂浆100片　

TP GIKEN

试片玻璃100块　

TP GIKEN

殖民地50块试验片　

TP GIKEN

凝析钙试件50件　

TP GIKEN

测试件阳离子电沉积涂层50件　

TP GIKEN

试件彩钢50件　

TP GIKEN

试件镀锌钢50件　

TP GIKEN

试件镀锌钢板50件　

TP GIKEN

试件沥青毡430、50件　

TP GIKEN

300块试片锡板　

TP GIKEN

凹槽测试仪 (跌落测试仪) BOX型JIS标准140×40×30 mm

TP GIKEN

多用途涂布机 (涂布宽度50 mm)

TP GIKEN

色散比较仪500×420×650 mm　TP-035

This machine has been developed as a dispersion comparison test machine that is closest to the dispersion principle of Eyeliter sand grind mill.
Pigments, vehicles, and glass beads are prepared in a glass tube, tightly stoppered, and loaded into the unit. When horizontal motion is applied in the longitudinal direction of the tube, the dispersion effect is exerted by the movement and vibration of the glass bead.

TP GIKEN

泰伯耐磨性测试仪515 x 310 x 360 mm　TP-152

This machine is used to measure the degree of wear of surface treatment materials such as coating and plating, plastics, rubber, decorative plywood, fibers, and other materials.

TP GIKEN

洗涤剂 (2支) 480×650×720 mm　TP-153

It is an excellent testing machine that performs cleaning resistance tests on paint coatings, plastics, floor materials, and other materials and is manufactured in accordance with JIS standards and the Gardner system.
The specimen surface is reciprocated at constant speed by the prescribed brush to observe the condition of feeding the specimen.

TP GIKEN

胶片摩擦测试机400 x 350 x 600 mm　TP-154

This machine measures the friction durability of marker pens for metal coatings and stationery by rubbing them with gauze, felt, sand eraser, etc.

TP GIKEN

Erichsen测试机240 x 480 x 300 mm　TP-180

This unit measures the coating strength of a painted surface.
The specimen set in the specimen holder is fastened and fixed with a die, and the punch is extruded from the back of the film surface.

TP GIKEN

吸盘160 x 260 x 50 mm　TP-201

When the applicator, sag tester, etc., is used to create a constant thickness coating film, the purpose of this system is to create a constant coating film by sucking and adhering the test specimen onto the plate (float glass) to maintain smooth contact.

TP GIKEN

自动贴膜器 (也可用作棒涂机) 940 x 540 x 300 mm　TP-202

This is a test machine that performs optimum coating tests on sheets of paper, metal, film, etc., by setting the coating speed with an applicator or bar coater.

TP GIKEN

JIS类型无取货时间测试仪450 x 400 x 400 mm　TP-250

This machine measures the drying time of traffic paint. It rolls the machine on the painted surface at a constant speed (passing through the paint film for 1 second) and checks whether the paint film has adhered to the tire of the test roll.
Use the traffic applicator to create a 150 mm wide coating film. Test the film 15 minutes after 1 type, 10 minutes after 2 types, and 3 types after 3 minutes to check for adhesion and reference the no-pickup time.

TP GIKEN

铅笔划痕试验机 (手动) 150 (130) ×80×65 mm　TP-260

This is a manual pencil scratching tester manufactured in accordance with JIS K-5600 and equipped with the function of a pencil scratching tester.
The hardness and adhesion strength of the coating film are measured by the hardness of the pencil that scratches when the paint or varnish is scratched with a pencil held at a load of 750 g and an angle of 45 degrees.

TP GIKEN

耐久测试仪　TP-261

It is used for a pass/fail test to determine whether a single coating or multilayer coating system of a paint or related product has reached a cured dry state after a specified drying time has elapsed.
It can also be used to measure the time it takes to reach the cured dry state.

TP GIKEN

福特杯钢不锈钢200 x 180 x 280 mm　TP-304

This device fills a cup with a sample of paint, varnish, etc., and measures the viscosity easily and quickly by grinding the surface tension with the attached glass plate and the flow time from a fixed orifice.

TP GIKEN

ISO流量杯孔径3mm108mL

TP GIKEN

Zahn-粘度杯1号孔径2.0mm

TP GIKEN

Stormer粘度计210 x 210 x 415 mm　TP-330

Viscosity of paint in a 500 ml sample can is measured in seconds of 100 revolutions by the resistance value of the accurately finished rotor blade.
This is a test machine that measures the time and calculates the KU value by determining the head so that the rotor rotates 100 times in about 30 seconds.

TP GIKEN

比重力杯50mL45φx 45 mm

TP GIKEN

JIS透湿杯410 x 250 x 200 mm　TP-415

This unit is used to measure the moisture permeability of plastic paper, tarpaulin paper, and other packaging materials.

TP GIKEN

柔性试验机圆柱压圆法

TP GIKEN

［已停用］RC型涂膜干燥时间测量仪I型 (干燥记录仪) 240×500×110 mm