[FUJIGEN KOGYO Co., Ltd.] 所有产品
-
Tibirsko叶片直径:Φ1.2-Φ9.7刀尖角度:90刀柄直径:10
4找到 产品
JPY: 14,160-
USD: 88.76-
-
-
-
-
-
-
-
-
-
-
-
-
-
R特殊Jr.。腓肠肌25 NK25-05R
Chip replaceable and R chamfering up to 0.5~5R is possible.
Carbide chips that can be used on 4 sides with 1 chip, and the life is more than 5 times longer than Hiss.1找到 产品
JPY: 22,970
USD: 143.99
-
-
迷你R刀尖角度:45刀柄直径:20 MR20-16S
R chamfer and C chamfer can be performed by replacing the chip.
It uses a chip that can be used for 8 corners.1找到 产品
JPY: 22,970
USD: 143.99
-
台式倒角机漂亮的角落 F3
High-speed cutting with 8000 revolutions has been realized.
It is easy to adjust the chamfer amount with the chamfer amount notation that can be seen at a glance.1找到 产品
JPY: 352,320
USD: 2,208.49
-
-
-
扳手长度90公厘 NL-4
Used to attach clamp screws and lock pins to chamfer cutter tips.
1找到 产品
JPY: 750
USD: 4.70
-
-
匈铁曼 HAM4-150CP3003
Lightweight, handy type, chamferable from thread surface to C4.
Lightweight.1找到 产品
JPY: 136,400
USD: 855.01
-
Máy khoan cho chamfer chuyển Ruby 30 ° Φ29
3找到 产品
JPY: 18,940-
USD: 118.72-
-
倒角刀具45°柄Φ32 NK4530T
The problem of secondary scratching in various work materials was also cleared.
You can select an angle and chamfer up to 10 C.1找到 产品
JPY: 50,260
USD: 315.05
-
-
男性纳诺 SCN0845E
It is now possible to perform machining on areas where chamfering or fumigation could not be performed due to interference from vise or clamp.
Center hole/fizzle processing, countersunk chamfering, and edge chamfering are possible.1找到 产品
JPY: 16,970
USD: 106.38
-
NICECUT手臂(阴性S型，3个) AMNS-03
The machining type can be changed by replacing the arm.
Face milling.1找到 产品
JPY: 57,470
USD: 360.25
-
NICECUT手臂(阴性S型，6个) AMNS-06
The machining type can be changed by replacing the arm.
Face milling.1找到 产品
JPY: 110,910
USD: 695.23
-
NICECUT手臂(阴性T型，3片) AMNT-03
The machining type can be changed by replacing the arm.
Face milling.1找到 产品
JPY: 57,470
USD: 360.25
-
NICECUT手臂(阴性T型，6个) AMNT-06
The machining type can be changed by replacing the arm.
Face milling.1找到 产品
JPY: 110,910
USD: 695.23
-
Aero Mill (刀柄Φ12,加工直径Φ30,阴性) ARN12-30S
The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.1找到 产品
JPY: 35,910
USD: 225.10
-
Aero Mill (刀柄Φ16,加工直径Φ40,阴性) ARN16-40S
The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.1找到 产品
JPY: 40,220
USD: 252.12
-
Aero Mill (尚克Φ12,加工直径Φ30,阳性) ARP12-30S
The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.1找到 产品
JPY: 35,910
USD: 225.10
-
Aero Mill (尚克Φ16,加工直径Φ40,阳性类型) ARP16-40S
The use of a small diameter shank makes it suitable for use in low-stiffness machines.
By using different negative and positive types of machining work, it is possible to machine under more optimal conditions.1找到 产品
JPY: 40,220
USD: 252.12
-
中央倒角磨铝武士Φ10长型 AZ10-90-L120
Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.1找到 产品
JPY: 26,450
USD: 165.80
-
中央倒角磨铝制武士Φ10 AZ10-90-L75
Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.1找到 产品
JPY: 23,890
USD: 149.75
-
中央倒角磨铝制武士Φ4 AZ4-90-L60
Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.1找到 产品
JPY: 12,240
USD: 76.73
-
中央倒角磨铝制武士Φ6 AZ6-90-L75
Uses the cutting edge shape that is ideal for aluminum processing, resulting in good sharpness and reduces the occurrence of keri and burr.
Reduces deburring work after machining.1找到 产品
JPY: 17,580
USD: 110.20
-
小鸟M8 BC16-14XS-M8
Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.1找到 产品
JPY: 23,540
USD: 147.56
-
小鸟座椅M10 BC20-17.5XS-M10
Significantly shortens the conventional process of cap bolt seat grinding.
The seat grinding and chamfering of the lower hole are performed simultaneously, and the depth of machining can be freely adjusted.1找到 产品
JPY: 25,130
USD: 157.53
