[ONISHI MANUFACTURING Co., Ltd.] 所有产品
公告供应
-
-
-
ONISHI MANUFACTURING Co., Ltd.
HSS钻孔(六轴，长，铁厂，Φ3.0 x刀锋长度75 x全长180 mm)
12找到 产品
JPY: 1,890-
USD: 11.85-
-
-
-
-
-
-
-
-
-
ONISHI MANUFACTURING Co., Ltd.
手环Auger (手柄，木工，Φ6.0 x刀片长度135 x总长度410毫米)
11找到 产品
JPY: 1,880-
USD: 11.79-
-
-
ONISHI MANUFACTURING Co., Ltd.
钻头(木器，木架结构，长，Φ16.0 x刀片长度385 x总长度470 mm)
7找到 产品
JPY: 4,390-
USD: 27.52-
-
ONISHI MANUFACTURING Co., Ltd.
Pilot Hole Awl (HSS,木工，Φ3×刃长42×全长115 mm)
3找到 产品
JPY: 1,060-
USD: 6.65-
-
-
-
-
-
-
-
-
-
ONISHI MANUFACTURING Co., Ltd.
Hex Shank Point Tap M 3 x 0.50螺丝长度:15公厘
6找到 产品
JPY: 2,100-
USD: 13.16-
-
ONISHI MANUFACTURING Co., Ltd.
激光设备六轴模具支架 NO29-DH-25
Can be attached to models with forward/reverse rotation such as impact screwdrivers, and can easily correct screw threads and collapsed threads.
Thread the bolt.1找到 产品
JPY: 1,830
USD: 11.47
-
-
-
ONISHI MANUFACTURING Co., Ltd.
六角柄螺旋龙头M12×1.75 NO28S-M12X1.75
Can be attached to a power tool with forward/reverse rotation such as an impact screwdriver to perform thread drilling in a short time.
Spiral groove allows chips to be ejected upward.1找到 产品
JPY: 3,700
USD: 23.19
-
ONISHI MANUFACTURING Co., Ltd.
HSS钻头(六轴，铁厂，6.8毫米) NO20E-68
Hex shaft ironwork drill for impact driver (12 V or more).
Work Material: General Steel, Aluminum, Wood, Acrylic Plate.1找到 产品
JPY: 2,030
USD: 12.73
-
ONISHI MANUFACTURING Co., Ltd.
钻头(具有钻孔深度刻度的木工6.0mm) NO10-060
Ideal for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 1,600
USD: 10.03
-
ONISHI MANUFACTURING Co., Ltd.
钻头(具钻孔深度刻度的木工8.0mm) NO10-080
Ideal for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 1,600
USD: 10.03
-
ONISHI MANUFACTURING Co., Ltd.
钻头(具有钻孔深度刻度的木工9.0mm) NO10-090
Ideal for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 1,600
USD: 10.03
-
ONISHI MANUFACTURING Co., Ltd.
钻头(具有钻孔深度刻度的木工10.0mm) NO10-100
Ideal for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 1,600
USD: 10.03
-
ONISHI MANUFACTURING Co., Ltd.
钻头(具有钻孔深度刻度的木工10.5mm) NO10-105
Ideal for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 1,600
USD: 10.03
-
ONISHI MANUFACTURING Co., Ltd.
钻头(具有钻孔深度刻度的木工，12.0mm) NO10-120
Ideal for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 1,600
USD: 10.03
-
ONISHI MANUFACTURING Co., Ltd.
钻头(具有钻孔深度刻度的木工13.0mm) NO10-130
Ideal for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 1,990
USD: 12.47
-
ONISHI MANUFACTURING Co., Ltd.
钻头(带钻孔深度刻度的木工13.5mm) NO10-135
Ideal for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 1,990
USD: 12.47
-
ONISHI MANUFACTURING Co., Ltd.
钻头(具有钻孔深度刻度的木工，15.0mm) NO10-150
Ideal for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 1,990
USD: 12.47
-
ONISHI MANUFACTURING Co., Ltd.
钻头(木工用钻孔深度计16.0mm) NO10-160
Ideal for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 2,390
USD: 14.98
-
ONISHI MANUFACTURING Co., Ltd.
钻头(带钻孔深度刻度的木工18.0mm) NO10-180
Suitable for deep hole work.
Contains a line that serves as a guide for depth adjustment.1找到 产品
JPY: 2,390
USD: 14.98
