[Ogura & Co., Ltd.] 所有产品
公告供应
-
-
-
电池3。哦 BL1830B
Since there is no memory effect, you can use it when you want to use it and charge it when you want to charge it.
You can easily and reliably get a full charge.1找到 产品
JPY: 19,000
USD: 119.10
-
电池6。哦 BL1860B
Since there is no memory effect, you can use it when you want to use it and charge it when you want to charge it.
You can easily and reliably get a full charge.1找到 产品
JPY: 24,400
USD: 152.95
-
便携式条盒MB225 MB-225
Fully compatible with SD490 rebar.
The bend angle setting is a dial type, and it is optional non-step setting by using the fine adjustment lever together.1找到 产品
JPY: 550,313
USD: 3,449.59
-
便携式条盒MB819 MB-819
Fully compatible with SD490 rebar.
The bend angle setting is a dial type, and it is optional non-step setting by using the fine adjustment lever together.1找到 产品
JPY: 427,500
USD: 2,679.75
-
-
-
［已停用］无绳液压打孔机 HPC-N209WDF
Cordless puncher for mild steel up to t9.
The hole diameter φ20/plate thickness t9mm (SS400 material) can be drilled continuously 40 times.1找到 产品
JPY: 260,625
USD: 1,633.71
-
-
［已停用］无线供应商 HBB-90DFN
This is a charging point bar vendor for D16 that is easy to bend in the field.
Fully charged, D16 rebar can be bent continuously 50 times.1找到 产品
JPY: 230,625
USD: 1,445.65
-
［已停用］便携式钢筋供应商 MB816
It can isolate the working part and the structural part and block iron powder.
The discharge port of the back panel is improved, and a lot of iron powder can be released.1找到 产品
JPY: 262,500
USD: 1,645.46
-
［已停用］Cordless gia cố Cutter HCC-13DF
The cutting speed is about twice as high as that of conventional machines, and the work efficiency is about twice as high.
The D13 (SD345) can be disconnected approximately 240 times on a single charge.1找到 产品
JPY: 175,313
USD: 1,098.93
-
［已停用］无绳液压打孔机 HPC-156WDF
A lightweight and compact double acting puncher for drilling φ15 mm stainless steel t6mm.
Both punching and pulling are hydraulically actuated by the double action type, which eliminates the snagging on the members during pulling up, allowing you to work in the field without stress.1找到 产品
JPY: 204,375
USD: 1,281.11
-
［已停用］液压打孔机 HPCNF188W
A neck break puncher that can be drilled at any position from 0° to 90°.
Simple double motion system allows you to pull up without worry.1找到 产品
JPY: 261,563
USD: 1,639.59
-
［已停用］可充电zlahti切割机 HSC20BL60AH
Even though it is a cordless type, it has the high power of an AC100V machine.
It is possible to cut the opening of the reinforcing bar and the frame bar at 3.5 mm from the collar and the edge.1找到 产品
JPY: 166,875
USD: 1,046.04
-
［已停用］Zlahti切割机 HSC25BL
Even though it is cordless, it has the high power of an AC100V machine.
It is possible to cut the opening of the reinforcing bar and the frame bar at 3.5 mm from the collar and the edge.1找到 产品
JPY: 185,625
USD: 1,163.57
-
-
［已停用］无绳重型切割机 HCC-16BL
The fastest DC18V cordless cutter ever, D16 (SD345) rebar can be cut in about 2.6 seconds.
It is equipped with a new brushless motor that achieves overwhelmingly high power.1找到 产品
JPY: 219,441
USD: 1,375.55
-
［已停用］无绳杆切割机 HSC-20BLN
The new original chip saw, which has excellent cost performance, uses a strong irregular triple pin system, and achieves stable cutting performance and easy operation even without flanges.
Even though it is a cordless type, it has the high power of an AC100V machine.1找到 产品
JPY: 173,438
USD: 1,087.18
