[EIGHT TOOL Co., Ltd.] 所有产品
公告供应
-
-
-
六角扳手锥头标准尺寸激光设备门座1.5-6毫米 TS-7SD
The taper head further improves durability and abrasion resistance so that it can be used for fastening. It has 10~20% higher torsional strength than conventional ball points, and is especially effective when used at an angle (0~20°).
The door holder has no resistance between the wrench and the holder, so it is easy to take in and out. After use, just close the door and the wrench will align to the original direction.1找到 产品
JPY: 3,950
USD: 24.76
-
六角扳手锥头标准尺寸激光设备门座1.5-10mm TS-9D
The taper head further improves durability and abrasion resistance so that it can be used for fastening. It has 10~20% higher torsional strength than conventional ball points, and is especially effective when used at an angle (0~20°).
The door holder has no resistance between the wrench and the holder, so it is easy to take in and out. After use, just close the door and the wrench will align to the original direction.1找到 产品
JPY: 5,850
USD: 36.67
-
-
六角杆扳手锥头额外长组1.5-6毫米 TLS-7S
Taper head has further improved durability and abrasion resistance so that it can be used for fastening.
It has 10% to 20% higher torsional strength than conventional ball points, and is especially effective when used at an angle (0~20°).1找到 产品
JPY: 4,807
USD: 30.13
-
六角杆扳手锥头额外长组1.5-10mm TLS-9N
Taper head has further improved durability and abrasion resistance so that it can be used for fastening.
It has 10% to 20% higher torsional strength than conventional ball points, and is especially effective when used at an angle (0~20°).1找到 产品
JPY: 7,843
USD: 49.16
-
-
六角扳手插销锥头额外长组1.5-10mm BCT-S9
The holder is compact with 2 levels. The upper part opens and it is easy to pull out. The upper part and the lower part can be used separately by removing the connecting pin, and it is convenient for carrying.
The fit ring embedded in the tapered head tip securely captures the cap bolt, allowing you to insert it into the desired threaded hole with one hand.1找到 产品
JPY: 8,393
USD: 52.61
-
-
六角杆扳手锥头标准尺寸特殊短组1.5-10mm TTR-S9
The shorter length (L1 dimension) is set to 1/2 or less of the conventional standard and is effective for work in tight spaces.
The bending angle is slightly wider than 90° to prevent the fingertip from touching the bottom during use, further enhancing usability.1找到 产品
JPY: 5,971
USD: 37.43
-
-
六角形横杆扳手球头额外长组1.5-8公厘 BHS-8
Since the ball point is cut into a spherical shape, it can be used at an angle of about 25°, and the temporary tightening of the bolt is quick, improving workability.
The holder makes it easy to take out and store the hex wrench, preventing loss, and convenient for carrying and storing.1找到 产品
JPY: 6,050
USD: 37.92
-
六角杆扳手锥头额外长管与设置1.5-10mm TLS-9NP
The pipe adapter developed specifically for the two-stage holder stores two pipes neatly without being bulky.
It comes with a pipe, so it is suitable for extra tightening.1找到 产品
JPY: 8,171
USD: 51.22
-
六角杆扳手锥头半长细径设定1.27-4毫米 MC-TMD
Taper head ® has further improved durability and abrasion resistance so that it can be used for fastening.
10~20% higher torsional strength than conventional ball points.1找到 产品
JPY: 2,643
USD: 16.57
-
-
激光设备组1.5~8mm六角扳手球头半长门夹 016-158D
Since the ball point is cut into a spherical shape, it can be used at an angle of about 25°, and the temporary tightening of the bolt is quick, improving workability.
The door holder has no resistance between the wrench and the holder and is easy to put in and take out. After use, just close the door and the wrench will align to the original direction.1找到 产品
JPY: 2,686
USD: 16.84
-
激光设备组1.5~10mm六角扳手球头半长门夹 016-1510D
Since the ball point is cut into a spherical shape, it can be used at an angle of about 25°, and the temporary tightening of the bolt is quick, improving workability.
The door holder has no resistance between the wrench and the holder and is easy to put in and take out. After use, just close the door and the wrench will align to the original direction.1找到 产品
JPY: 3,400
USD: 21.31
-
六角扳手锥头额外的长色扳手组合1.5-10mm TLC-S9N
The color that is easy to understand the size is high-grade and hard-to-peel baked paint, and 2.5~10 mm is silk printed with size indication.
Taper head ® has been further improved in durability and abrasion resistance so that it can be used for fastening.1找到 产品
JPY: 8,471
USD: 53.10
-
-
六角扳手锥头超长靴加工装置1.5-10mm TLLB-S9N
The color of the boots makes the size easy to understand.
Even if the wrench breaks, the boots will prevent the splinters from scattering.1找到 产品
JPY: 10,014
USD: 62.77
-
-
激光设备集0。六角杆扳手球点半长门夹。05in-3/8英寸 016-13ZD
Since the ball point is cut into a spherical shape, it can be used at an angle of about 25°, and the temporary tightening of the bolt is quick, improving workability.
The door holder has no resistance between the wrench and the holder and is easy to put in and take out. After use, just close the door and the wrench will align to the original direction.1找到 产品
JPY: 5,214
USD: 32.68
-
激光设备1/16in-3/8的六角杆扳手锥头额外长门夹 TEL-S9ZD
Taper head ® has been further improved in durability and abrasion resistance so that it can be used for main tightening. It has 10~20% higher torsional strength than conventional ball points, and is especially effective when used at an angle (0~20°).
The door holder has no resistance between the wrench and the holder, so it is easy to take in and out. After use, just close the door and the wrench will align to the original direction.1找到 产品
JPY: 8,979
USD: 56.28
-
-
-
-
-
六角扳手加长组 014-9
Designed and manufactured to exceed ISO and JIS standards, this product is for professionals.
The holder makes it easy to take out and store the hex wrench, preventing loss, and convenient for carrying and storing.1找到 产品
JPY: 3,050
USD: 19.12
-
刀的六角横杆扳手金属套 009-3
It can be folded and stored in a case, so it is convenient to carry, so you won't lose it.
The case is a handle, so it tightens strongly.1找到 产品
JPY: 1,721
USD: 10.79
-
激光设备组六角扳手标准尺寸门座 RS-13ZD
The door holder has no resistance between the wrench and the holder and is easy to put in and take out. After use, just close the door and the wrench will align to the original direction.
Designed and manufactured to exceed ISO and JIS standards, this product is for professionals.1找到 产品
JPY: 4,286
USD: 26.87
-
-
-
-
-
-
-
-
-
T型六角杆扳手锥头分离可复位手柄 WHH-10TL
The handle is made of high-grade acetate resin that is comfortable to touch and resistant to impact.
Ecological disposal is possible because the handle and wrench can be separated easily.1找到 产品
JPY: 2,014
USD: 12.63
