[ICHINEN TASCO CO., LTD.]名片架
过滤器
-
铜管刷 TA504CB
Ideal for removing oxide film and dirt from the inner and outer surfaces of pipes before brazing.
The body is made of resin and has a double screw fastening structure, so it is easy to replace the replacement brush.1找到 产品
JPY: 1,220
USD: 7.65
-
-
铜管铰刀 TA530
Since it has 5 blades, it can be used for deburring.
It has a finishing file.1找到 产品
JPY: 4,200
USD: 26.35
-
大口径管道用铰刀 TA530DM
Can deburr inner and outer surfaces.
With a hexagonal shaft for use with an electric drill.1找到 产品
JPY: 38,000
USD: 238.36
-
完成文件 TA530Y
Used to trim the cut surface of copper pipe after reaming.
details1找到 产品
JPY: 3,800
USD: 23.84
-
-
螺丝锁 TA930
For relatively small detachable screws of M6 or less.
An inhibitor for loosening, leaking, and rusting screws.1找到 产品
JPY: 2,690
USD: 16.87
-
螺丝锁扣 TA930A
Low strength type
Apply to gaps in metal parts such as screws and shafts to start curing by blocking air.1找到 产品
JPY: 4,400
USD: 27.60
-
扁螺母松解预防剂 TA930R
Low Strength Type
Prevents loosening of the flare nut due to vibration.1找到 产品
JPY: 5,800
USD: 36.38
-
制冷剂管道保温材料用胶粘剂 TA931RB
If the adhesive film is transparent, the protruding part will not be noticeable.
There is no corrosion of the copper pipe even when it is directly attached to the refrigerant copper pipe.1找到 产品
JPY: 1,350
USD: 8.47
-
-
-
-
-
-
-
-
-
六边形皮革床组 TA668RA
5 Piece Set of 5, 8, 10, 13, 15 mm
Shank 1/4′′ (6.35 mm) Hexagonal Shaft1找到 产品
JPY: 7,410
USD: 46.48
-
-
钛涂层台阶钻 TA681MA
Beautiful cutting surface! You can drill 10 size holes with 1!
The cutting edge is thinned, which increases the cutting speed and creates a beautiful cutting surface.1找到 产品
JPY: 8,150
USD: 51.12
-
-
-
-
螺母全螺纹快速转位 TA732NT
Attach it to your impact screwdriver for easy work.
Can be used even if there are obstacles in the front and back of the nut.1找到 产品
JPY: 1,710
USD: 10.73
-
-
-
-
-
［已停用］不锈钢管铰刀 TA530DK
Can deburr inner and outer surfaces.
Smooth deburring and beautiful finish with 40 blades from stainless steel pipe to copper pipe.1找到 产品
JPY: 11,010
USD: 69.06
-
-
-
-
-
-
-
［已停用］钻孔导钻 TA404RJ
Before drilling a hole in the wall, you can see where the drill tip comes out. Essential items for drilling operations such as electrical wiring, cable installation, and concrete detection.
Can be used on various types of non-magnetic wall surfaces up to 300 mm thick, including wood, tile, gypsum board, brick, and concrete1找到 产品
JPY: 30,700
USD: 192.57
-
-
-
