NIHON PISCO CO., LTD.

69-8218-21　Mold Thermal Coupling Elbow 08 Type Tube 8 mm Screw R1/8　AKL08-801

检查序列排列

功能

The connection part (plug) and the screw part (socket) are separated. It can be connected simply by machining the mold in advance according to the screw size, embedding the screw part using a hex wrench, and inserting the connection part afterwards. In addition, when attaching and detaching, the opening sleeve is removed by removing the joint, so that no protrusion remains on the mold.
The built-in stop valve type allows for safe attachment and detachment of the joint. (Does not spill hot water when attaching/detaching joints.)

Applicable Tube Outer Diameter D (mm): 8
Connection Diameter: R1/8
Hex Opposite Side (mm): 5
Maximum working pressure (MPa): 0.9
Fluids used: air, water (conditions apply), heating medium oil
Operating temperature range (°C): 0~60 (without freezing)
Operating temperature range: 0~60°C (air), 0~99°C (water), 0~120°C (heating medium oil) (not frozen)
Maximum working pressure: 0.9 MPa
Material/Finish: Body/Brass + Electroless Nickel Plating, Seal Rubber/Hydrogenated Nitrile Rubber (HNBR)
When the fluid used is water or heat medium oil, observe the following conditions. 1. When using water or heating medium oil, be sure to keep the surge pressure below the maximum working pressure. 2.Be sure to use the insert ring when using water or heating medium oil.
Country of Origin: Japan
Securities Code: 378-0805

封装大小：70×53×16 mm　60 g　 [关于封装大小]

第号命令。	69-8218-21
型号号。	AKL08-801
标准价格	JPY: 1,690 USD: 10.59 Excange rate 1USD= 159.53JPY Valid price in Japan
数量	1piece
日本股票
供应商存货

第号命令。	名称	型号号。	数量	标准价格	日本的有效价格
69-8218-21	Mold Thermal Coupling Elbow 08 Type Tube 8 mm Screw R1/8　AKL08-801	AKL08-801	1piece	JPY: 1,690	USD: 10.59
69-8218-22	Mold Thermal Coupling Elbow 08 Type Tube 8 mm Screw R1/4　AKL08-802	AKL08-802	1piece	JPY: 1,710	USD: 10.72
69-8218-23	Mold Temperature Adjustment Joint Elbow 10 Type Tube 10 mm Screw R1/4　AKL10-1002	AKL10-1002	1piece	JPY: 1,870	USD: 11.72