63-4034-13 长六角扳手身短式 HLDS250-2.5
功能
- High grade ball point L-shaped long hex wrench.
- The unique new design and the use of special alloy steel materials have improved wear resistance and torsional strength.
- The original plastic holder makes it convenient for carrying and tool management.
- With a larger contact surface so that the hexagonal tip fits perfectly into the hexagonal hole of the bolt, there is less wear and less wiggle.
- The length under the neck is about 1/2 of the conventional one, and it is effective for work in narrow places.
- The bend angle at the bottom of the neck was set to 95° to make room for the fingertips.
规格
- 大小(S:mm):2.5
- 总长度(L:mm):112.5
- 扳手键长度(l:mm):8.5
- 重量 (g) :4
- *球点扭矩较低，请注意不要用力过大。
- *球点的摆动角度根据大小和螺栓的变化而变化。
- *向螺栓的旋转方向施加力。向上拉或向下推可能会损坏弯曲部分。
| 第号命令。 | 63-4034-13 | |
|---|---|---|
| 型号号。 | HLDS250-2.5 | |
| JAN代码 | 4989433830438 | |
| 标准价格 |
JPY: 1,290
USD: 8.09
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 数量 | 1piece | |
| 日本股票 |
|
|
| 供应商存货 |
|
|
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 | 数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|
 |
63-4034-11 | 长六角扳手身短式 HLDS250-1.5 | HLDS250-1.5 | 1piece | JPY: 1,180 | USD: 7.40 |
|
|
 |
63-4034-12 | 长六角扳手身短式 HLDS250-10 | HLDS250-10 | 1piece | JPY: 3,540 | USD: 22.19 |
|
|
 |
63-4034-13 | 长六角扳手身短式 HLDS250-2.5 | HLDS250-2.5 | 1piece | JPY: 1,290 | USD: 8.09 |
|
|
 |
63-4034-14 | 长六角扳手身短式 HLDS250-2 | HLDS250-2 | 1piece | JPY: 1,230 | USD: 7.71 |
|
|
 |
63-4034-15 | 长六角扳手身短式 HLDS250-3 | HLDS250-3 | 1piece | JPY: 1,340 | USD: 8.40 |
|
|
 |
63-4034-16 | 长六角扳手身短式 HLDS250-4 | HLDS250-4 | 1piece | JPY: 1,420 | USD: 8.90 |
|
|
 |
63-4034-17 | 长六角扳手身短式 HLDS250-5 | HLDS250-5 | 1piece | JPY: 1,630 | USD: 10.22 |
|
|
 |
63-4034-18 | 长六角扳手短式 HLDS250-6 | HLDS250-6 | 1piece | JPY: 2,000 | USD: 12.54 |
|
|
 |
63-4034-19 | 长六角扳手短式 HLDS250-8 | HLDS250-8 | 1piece | JPY: 2,460 | USD: 15.42 |
|