61-8863-21 金刚石内圆杆圆头Φ2.0 x刀片长度12 x轴3mm T3-720M
功能
- Since the top of the head is R-shaped, it is suitable for use in drilling and deburring small holes.
- With a noop hardness of approximately 7000 (the hardest material on earth), it can be used for most work materials such as metals, marble, glass, etc. Especially, it is most suitable for high-hardness work materials such as ceramic materials. However, because diamond is weak against heat, it is not suitable for machining (such as HSS) where heat generation during grinding is high.
- R Surface polishing, chamfering, deburring.
规格
- 粒度 (#) :140/170
- 叶片直径 (mm) :2.0
- 叶片长度 (mm) :12
- 轴径 (mm) :3
- 长度 (mm) :45
- 浮雕 (mm) :6
- 最大工作速度r.pm (rpm) :8万
- 刀片直径x刀片长度x总长度:2.0 x 12 x 45mm
- 粒度:140/170
- 轴径:3mm
- *工作总是戴安全帽，戴安全眼镜，如防护设备。
- 代码号:767-3761
封装大小：53×133×20 mm 20 g [关于封装大小]
| 第号命令。 | 61-8863-21 | |
|---|---|---|
| 型号号。 | T3-720M | |
| JAN代码 | 4989999388718 | |
| 标准价格 |
JPY: 1,125
USD: 7.00
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 数量 | 1piece | |
| 日本股票 |
|
|
| 供应商存货 |
|
|
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Maximum operating speed (rpm) |
Blade length (mm) |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-8863-29 | 金刚石内圆柱圆尖Φ5.0×叶片长度10 X轴3mm T3-750M | T3-750M | 55000 | 10 | 1piece | JPY: 1,613 | USD: 10.04 |
|
|
 |
61-8863-27 | 金刚石内圆杆圆头Φ4.0 x刀片长度10 x轴3mm T3-740M | T3-740M | 60000 | 10 | 1piece | JPY: 1,545 | USD: 9.61 |
|
|
 |
61-8863-17 | 金刚石内圆柱圆尖Φ1.0×叶片长度6X轴3mm T3-710M | T3-710M | 80000 | 6 | 1piece | JPY: 1,125 | USD: 7.00 |
|
|
 |
61-8863-19 | 金刚石内圆柱圆尖Φ1.5×叶片长度6X轴3mm T3-715M | T3-715M | 80000 | 6 | 1piece | JPY: 1,125 | USD: 7.00 |
|
|
 |
61-8863-21 | 金刚石内圆杆圆头Φ2.0 x刀片长度12 x轴3mm T3-720M | T3-720M | 80000 | 12 | 1piece | JPY: 1,125 | USD: 7.00 |
|
|
 |
61-8863-23 | 金刚石内圆杆圆头Φ2.5×刀片长度12 X轴3mm T3-725M | T3-725M | 80000 | 12 | 1piece | JPY: 1,358 | USD: 8.45 |
|
|
 |
61-8863-25 | 金刚石内圆柱圆尖Φ3.0×叶片长度12 X轴3mm T3-730M | T3-730M | 80000 | 12 | 1piece | JPY: 1,358 | USD: 8.45 |
|