61-2612-21 钻石内接长条Φ3.5 x刀锋长度6 x轴3#120 INT-035DL
功能
- The shank diameter is 3mm.
- With a noop hardness of approximately 7000 (the hardest material on earth), it can be used for most work materials such as metals, marble, glass, etc. Especially, it is most suitable for high-hardness work materials such as ceramic materials. However, because diamond is weak against heat, it is not suitable for machining (such as HSS) where heat generation during grinding is high.
- Compatible work materials: cemented carbide, glass, ceramic, rubber, plastic, stone, concrete, ferrite, and other non-ferrous metals.
规格
- 谷物尺寸 (#) :120
- 叶片直径 (mm) :3.5
- 刀锋长度 (mm) :6
- 轴直径 (mm) :3
- 长度 (mm) :80
- 浮雕 (公厘) :
- 最大操作速度r.pm (rpm) :1万
- 质量 (G) :4.4
- 用途:混凝土工件:硬质合金、玻璃、陶瓷、橡胶、塑料、石材、混凝土、铁氧体等有色金属。
- 原籍国:日本
- 重量:4.。4克
- 制造商型号:INT035DL
- 代码编号:285-9955
封装大小：48×113×20 mm 20 g [关于封装大小]
| 第号命令。 | 61-2612-21 | |
|---|---|---|
| 型号号。 | INT-035DL | |
| JAN代码 | 4989999269208 | |
| 标准价格 |
JPY: 983
USD: 6.16
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 数量 | 1piece | |
| 日本股票 |
|
|
| 供应商存货 |
|
|
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Maximum operating speed (rpm) |
Total length (mm) |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-2612-23 | 钻石内接长条Φ4.5 x刀锋长度6 x轴3#120 INT-045DL | INT-045DL | 6000 | 80 | 1piece | JPY: 1,103 | USD: 6.91 |
|
|
 |
61-2612-24 | 钻石内接长条Φ5 x刀锋长度6 x轴3#120 INT-050DL | INT-050DL | 6000 | 80 | 1piece | JPY: 1,148 | USD: 7.20 |
|
|
 |
61-2612-25 | 钻石内部长条长条Φ5.5 x刀锋长度6 x轴3#120 INT-055DL | INT-055DL | 6000 | 80 | 1piece | JPY: 1,148 | USD: 7.20 |
|
|
 |
61-2612-20 | 钻石内接长条Φ3 x刀锋长度6 x轴3#120 INT-030DL | INT-030DL | 10000 | 80 | 1piece | JPY: 968 | USD: 6.07 |
|
|
 |
61-2612-21 | 钻石内接长条Φ3.5 x刀锋长度6 x轴3#120 INT-035DL | INT-035DL | 10000 | 80 | 1piece | JPY: 983 | USD: 6.16 |
|
|
 |
61-2612-22 | 钻石内接长条Φ4 x刀锋长度6 x轴3#120 INT-040DL | INT-040DL | 10000 | 80 | 1piece | JPY: 1,050 | USD: 6.58 |
|
|
 |
61-2612-15 | 钻石内部列Φ3.5 x刀锋长度6 x轴3#120 INT-035D | INT-035D | 70000 | 50 | 1piece | JPY: 893 | USD: 5.60 |
|
|
 |
61-2612-16 | 钻石内部列Φ4 x刀锋长度6 x轴3#120 INT-040D | INT-040D | 70000 | 50 | 1piece | JPY: 945 | USD: 5.92 |
|
|
 |
61-2612-17 | 钻石内部列Φ4.5 x刀锋长度6 x轴3#120 INT-045D | INT-045D | 70000 | 50 | 1piece | JPY: 998 | USD: 6.26 |
|
|
 |
61-2612-18 | 钻石内部列Φ5 x刀锋长度6 x轴3#120 INT-050D | INT-050D | 70000 | 50 | 1piece | JPY: 1,035 | USD: 6.49 |
|
|
 |
61-2612-19 | 钻石内部列Φ5.5 x刀锋长度6 x轴3#120 INT-055D | INT-055D | 70000 | 50 | 1piece | JPY: 1,035 | USD: 6.49 |
|
|
 |
61-2612-09 | 钻石内部列Φ0.5 x刀锋长度4 x轴3#325 INT-005D | INT-005D | 80000 | 50 | 1piece | JPY: 765 | USD: 4.80 |
|
|
 |
61-2612-10 | 钻石内部列Φ1 x刀锋长度6 x轴3#200 INT-010D | INT-010D | 80000 | 50 | 1piece | JPY: 765 | USD: 4.80 |
|
|
 |
61-2612-11 | 钻石内部列Φ1.5 x刀锋长度X6X轴3#200 INT-015D | INT-015D | 80000 | 50 | 1piece | JPY: 765 | USD: 4.80 |
|
|
 |
61-2612-12 | 钻石内部列Φ2 x刀锋长度6 x轴3#200 INT-020D | INT-020D | 80000 | 50 | 1piece | JPY: 788 | USD: 4.94 |
|
|
 |
61-2612-13 | 钻石内部列Φ2.5 x刀锋长度6 x轴3#120 INT-025D | INT-025D | 80000 | 50 | 1piece | JPY: 788 | USD: 4.94 |
|
|
 |
61-2612-14 | 钻石内部列Φ3 x刀锋长度6 x轴3#120 INT-030D | INT-030D | 80000 | 50 | 1piece | JPY: 863 | USD: 5.41 |
|