61-1431-21 锚钻(六轴，Φ25 x刀锋长度400 x全长520) ADX2-25.0HEXLL
功能
- The "4-edge" cutting edge makes the hole more circular than a typical 2-edge drill, making anchor insertion smoother.
- A "marking groove" was applied to the spiral to mark the perforation depth.
- This drill is ideal for drilling holes in anchors made by Sanko Techno Co., Ltd.
- The four-edge cutting edge allows for smooth drilling while reducing the burden on the operator by reducing the amount of snagging on the rebar.
- With the use of a "cutting edge pocket," cutting powder accumulated in the hole can be efficiently discharged, improving drilling work.
- Work Material: Concrete, Mortar, Block.
规格
- 叶片直径 (mm) :25
- 有效长度 (mm) :400
- 长度 (mm) :520
- 树干直径 (mm) :13
- 柄:
- 质量 (公斤) :1.041
- 形状模型:锤钻
- 6公厘 (平方) 。轴
- 圆柱体输入
- 刀锋部分:硬质合金刀尖
- 用途:工件:混凝土，砂浆，砌块。
- 原籍国:日本
- 重量:1.041公斤
- *钢筋、穿孔是钢尖缺陷的原因，故应避免。
- 制造商型号:ADX225.0HEXLL
- 代码号:376-4672
封装大小：35×35×540 mm 1.08 kg [关于封装大小]
| 第号命令。 | 61-1431-21 | |
|---|---|---|
| 型号号。 | ADX2-25.0HEXLL | |
| JAN代码 | 4996620328074 | |
| 标准价格 |
JPY: 7,950
USD: 49.83
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 数量 | 1piece | |
| 日本股票 |
|
|
| 供应商存货 |
|
|
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Total length (mm) |
Blade diameter (mm) |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1430-92 | 锚钻(六轴，Φ10.5 x刀锋长度160 x全长280) ADX2-10.5HEX | ADX2-10.5HEX | 280 | 10.5 | 1piece | JPY: 3,740 | USD: 23.44 |
|
|
 |
61-1430-93 | 锚钻(六轴，Φ12.0 x刀锋长度160 x全长280) ADX2-12.0HEX | ADX2-12.0HEX | 280 | 12 | 1piece | JPY: 4,300 | USD: 26.95 |
|
|
 |
61-1430-94 | 锚钻(六轴，Φ12.5 x刀锋长度160 x全长280) ADX2-12.5HEX | ADX2-12.5HEX | 280 | 12.5 | 1piece | JPY: 4,450 | USD: 27.89 |
|
|
 |
61-1430-95 | 锚钻(六轴，Φ12.7 x刀锋长度160 x全长280) ADX2-12.7HEX | ADX2-12.7HEX | 280 | 12.7 | 1piece | JPY: 4,450 | USD: 27.89 |
|
|
 |
61-1430-96 | 锚钻(六轴，Φ13.0 x刀锋长度160 x全长280) ADX2-13.0HEX | ADX2-13.0HEX | 280 | 13 | 1piece | JPY: 4,450 | USD: 27.89 |
|
|
 |
61-1430-97 | 锚钻(六轴，Φ14.0 x刀锋长度160 x全长280) ADX2-14.0HEX | ADX2-14.0HEX | 280 | 14 | 1piece | JPY: 4,670 | USD: 29.27 |
|
|
 |
61-1430-98 | 锚钻(六轴，Φ14.5 x刀锋长度160 x全长280) ADX2-14.5HEX | ADX2-14.5HEX | 280 | 14.5 | 1piece | JPY: 4,670 | USD: 29.27 |
|
|
 |
61-1430-99 | 锚钻(六轴，Φ15.0 x刀锋长度160 x全长280) ADX2-15.0HEX | ADX2-15.0HEX | 280 | 15 | 1piece | JPY: 4,820 | USD: 30.21 |
|
|
 |
61-1431-01 | 锚钻(六轴，Φ16.0 x刀锋长度160 x总长度280) ADX2-16.0HEX | ADX2-16.0HEX | 280 | 16 | 1piece | JPY: 4,820 | USD: 30.21 |
|
|
 |
61-1431-02 | 锚钻(六轴，Φ16.5 x刀锋长度200 x全长320) ADX2-16.5HEX | ADX2-16.5HEX | 320 | 16.5 | 1piece | JPY: 5,120 | USD: 32.09 |
|
|
 |
61-1431-03 | 锚钻(六轴，Φ17.0 x刀锋长度200 x全长320) ADX2-17.0HEX | ADX2-17.0HEX | 320 | 17 | 1piece | JPY: 5,180 | USD: 32.47 |
|
|
 |
61-1431-04 | 锚钻(六轴，Φ18.0 x刀锋长度200 x全长320) ADX2-18.0HEX | ADX2-18.0HEX | 320 | 18 | 1piece | JPY: 5,800 | USD: 36.36 |
|
|
 |
61-1431-06 | 锚钻(六轴，Φ19.0 x刀锋长度200 x总长度320) ADX2-19.0HEX | ADX2-19.0HEX | 320 | 19 | 1piece | JPY: 6,030 | USD: 37.80 |
|
|
 |
61-1431-08 | 锚钻(六轴，Φ20.0 x刀锋长度200 x总长度320) ADX2-20.0HEX | ADX2-20.0HEX | 320 | 20 | 1piece | JPY: 6,000 | USD: 37.61 |
|
|
 |
61-1431-10 | 锚钻(六轴，Φ20.5 x刀锋长度200 x全长320) ADX2-20.5HEX | ADX2-20.5HEX | 320 | 20.5 | 1piece | JPY: 6,150 | USD: 38.55 |
|
|
 |
61-1431-11 | 锚钻(六轴，Φ21.5 x刀锋长度200 x全长320) ADX2-21.5HEX | ADX2-21.5HEX | 320 | 21.5 | 1piece | JPY: 6,150 | USD: 38.55 |
|
|
 |
61-1431-12 | 锚钻(六轴，Φ22.0 x刀锋长度200 x全长320) ADX2-22.0HEX | ADX2-22.0HEX | 320 | 22 | 1piece | JPY: 6,150 | USD: 38.55 |
|
|
 |
61-1431-14 | 锚钻(六轴，Φ23.0 x刀锋长度200 x总长度320) ADX2-23.0HEX | ADX2-23.0HEX | 320 | 23 | 1piece | JPY: 6,590 | USD: 41.31 |
|
|
 |
61-1431-16 | 锚钻(六轴，Φ24.0 x刀锋长度200 x全长320) ADX2-24.0HEX | ADX2-24.0HEX | 320 | 24 | 1piece | JPY: 6,890 | USD: 43.19 |
|
|
 |
61-1431-19 | 锚钻(六轴，Φ25 x刀锋长度200 x全长320) ADX2-25.0HEX | ADX2-25.0HEX | 320 | 25 | 1piece | JPY: 7,030 | USD: 44.07 |
|
|
 |
61-1431-22 | 锚钻(六轴，Φ26 x刀锋长度200 x全长320) ADX2-26.0HEX | ADX2-26.0HEX | 320 | 26 | 1piece | JPY: 6,680 | USD: 41.87 |
|
|
 |
61-1431-24 | 锚钻(六轴，Φ27 x刀锋长度200 x全长320) ADX2-27.0HEX | ADX2-27.0HEX | 320 | 27 | 1piece | JPY: 8,140 | USD: 51.03 |
|
|
 |
61-1431-26 | 锚钻(六轴，Φ28 x刀锋长度200 x全长320) ADX2-28.0HEX | ADX2-28.0HEX | 320 | 28 | 1piece | JPY: 7,350 | USD: 46.07 |
|
|
 |
61-1431-29 | 锚钻(六轴，Φ30 x刀锋长度200 x全长320) ADX2-30.0HEX | ADX2-30.0HEX | 320 | 30 | 1piece | JPY: 8,020 | USD: 50.27 |
|
|
 |
61-1431-32 | 锚钻(六轴，Φ32 x刀锋长度200 x全长320) ADX2-32.0HEX | ADX2-32.0HEX | 320 | 32 | 1piece | JPY: 10,400 | USD: 65.19 |
|
|
 |
61-1431-35 | 锚钻(六轴，Φ34 x刀锋长度200 x全长320) ADX2-34.0HEX | ADX2-34.0HEX | 320 | 34 | 1piece | JPY: 12,400 | USD: 77.73 |
|
|
 |
61-1431-05 | 锚钻(六轴，Φ18.0 x刀锋长度300 x全长420) ADX2-18.0HEXL | ADX2-18.0HEXL | 420 | 18 | 1piece | JPY: 6,150 | USD: 38.55 |
|
|
 |
61-1431-07 | 锚钻(六轴，Φ19.0 x刀锋长度300 x总长度420) ADX2-19.0HEXL | ADX2-19.0HEXL | 420 | 19 | 1piece | JPY: 6,370 | USD: 39.93 |
|
|
 |
61-1431-09 | 锚钻(六轴，Φ20.0 x刀锋长度300 x总长度420) ADX2-20.0HEXL | ADX2-20.0HEXL | 420 | 20 | 1piece | JPY: 5,420 | USD: 33.98 |
|
|
 |
61-1431-13 | 锚钻(六轴，Φ22.0 x刀锋长度300 x全长420) ADX2-22.0HEXL | ADX2-22.0HEXL | 420 | 22 | 1piece | JPY: 6,850 | USD: 42.94 |
|
|
 |
61-1431-15 | 锚钻(六轴，Φ23.0 x刀锋长度300 x总长度420) ADX2-23.0HEXL | ADX2-23.0HEXL | 420 | 23 | 1piece | JPY: 7,030 | USD: 44.07 |
|
|
 |
61-1431-17 | 锚钻(六轴，Φ24.0 x刀锋长度300 x全长420) ADX2-24.0HEXL | ADX2-24.0HEXL | 420 | 24 | 1piece | JPY: 7,330 | USD: 45.95 |
|
|
 |
61-1431-20 | 锚钻(六轴，Φ25 x刀锋长度300 x全长420) ADX2-25.0HEXL | ADX2-25.0HEXL | 420 | 25 | 1piece | JPY: 7,760 | USD: 48.64 |
|
|
 |
61-1431-25 | 锚钻(六轴，Φ27 x刀锋长度300 x全长420) ADX2-27.0HEXL | ADX2-27.0HEXL | 420 | 27 | 1piece | JPY: 9,260 | USD: 58.05 |
|
|
 |
61-1431-27 | 锚钻(六轴，Φ28 x刀锋长度300 x全长420) ADX2-28.0HEXL | ADX2-28.0HEXL | 420 | 28 | 1piece | JPY: 8,350 | USD: 52.34 |
|
|
 |
61-1431-30 | 锚钻(六轴，Φ30 x刀锋长度300 x全长420) ADX2-30.0HEXL | ADX2-30.0HEXL | 420 | 30 | 1piece | JPY: 10,400 | USD: 65.19 |
|
|
 |
61-1431-33 | 锚钻(六轴，Φ32 x刀锋长度300 x全长420) ADX2-32.0HEXL | ADX2-32.0HEXL | 420 | 32 | 1piece | JPY: 10,020 | USD: 62.81 |
|
|
 |
61-1431-36 | 锚钻(六轴，Φ34 x刀锋长度300 x全长420) ADX2-34.0HEXL | ADX2-34.0HEXL | 420 | 34 | 1piece | JPY: 13,700 | USD: 85.88 |
|
|
 |
61-1431-18 | 锚钻(六轴，Φ24.0 x刀锋长度400 x全长520) ADX2-24.0HEXLL | ADX2-24.0HEXLL | 520 | 24 | 1piece | JPY: 8,000 | USD: 50.15 |
|
|
 |
61-1431-21 | 锚钻(六轴，Φ25 x刀锋长度400 x全长520) ADX2-25.0HEXLL | ADX2-25.0HEXLL | 520 | 25 | 1piece | JPY: 7,950 | USD: 49.83 |
|
|
 |
61-1431-23 | 锚钻(六轴，Φ26 x刀锋长度400 x全长520) ADX2-26.0HEXLL | ADX2-26.0HEXLL | 520 | 26 | 1piece | JPY: 9,330 | USD: 58.48 |
|
|
 |
61-1431-28 | 锚钻(六轴，Φ28 x刀锋长度400 x全长520) ADX2-28.0HEXLL | ADX2-28.0HEXLL | 520 | 28 | 1piece | JPY: 10,400 | USD: 65.19 |
|
|
 |
61-1431-31 | 锚钻(六轴，Φ30 x刀锋长度400 x全长520) ADX2-30.0HEXLL | ADX2-30.0HEXLL | 520 | 30 | 1piece | JPY: 11,500 | USD: 72.09 |
|
|
 |
61-1431-34 | 锚钻(六轴，Φ32 x刀锋长度400 x全长520) ADX2-32.0HEXLL | ADX2-32.0HEXLL | 520 | 32 | 1piece | JPY: 13,000 | USD: 81.49 |
|
|
 |
61-1431-37 | 锚钻(六轴，Φ34 x刀锋长度400 x全长520) ADX2-34.0HEXLL | ADX2-34.0HEXLL | 520 | 34 | 1piece | JPY: 15,600 | USD: 97.79 |
|