61-1395-21 硬质合金孔锯(米塔科，Φ50mm) MCS-50
功能
- Standard type of carbide hole saw.
- The use of a step center drill reduces the impact when the center drill is penetrated.
- Uses a 10 mm/13 mm chuck combination shank with any drill chuck diameter.
- Uses "10 mm/13 mm chuck combination shank" regardless of drill chuck diameter.
- Work Material: Thin Iron Plate, Stainless Steel Plate (3 mm or Less), Enameled Steel Plate, Aluminum Plate (2 mm or Less), etc.
规格
- 叶片直径 (mm) :50
- 胸部深度 (mm) :12
- 树干直径 (mm) :10.13
- 刀锋厚度 (mm) :1.9
- 有效长度 (mm) :4.5
- 变形模型:
- 变形电动机:电钻、振动钻 (旋转模式)
- 质量 (G) :205
- 变形电动机:电钻、振动钻 (旋转模式)
- 母材部分:合金钢
- 刀锋部分:硬质合金刀尖
- 中心钻:高速钢 (HSS)
- 用途:工件:薄钢板、不锈钢钢板 (3mm以下) 、玻璃搪瓷拉钢板、铝板 (2mm以下) 。
- 原籍国:日本
- 重量:205 g
- *刀尖缺失造成，硬质合金刀刃难打，中心钻过时间工件上强力不上。
- 制造商型号:MCS50
- 代码号:334-8164
封装大小：75×115×59 mm 190 g [关于封装大小]
| 第号命令。 | 61-1395-21 | |
|---|---|---|
| 型号号。 | MCS-50 | |
| JAN代码 | 4989270510401 | |
| 标准价格 |
JPY: 8,500
USD: 52.89
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 数量 | 1piece | |
| 日本股票 |
|
|
| 供应商存货 |
|
|
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Product category 1 |
Product category 2 |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1395-31 | 中心钻(对于METACORE,Φ6mm) S-6SC | S-6SC | Center drill | Heiss | 1piece | JPY: 720 | USD: 4.48 |
|
|
 |
61-1394-94 | 硬质合金孔锯(米塔科，Φ14毫米) MCS-14 | MCS-14 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1394-95 | 硬质合金孔锯(米塔科，Φ15mm) MCS-15 | MCS-15 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1394-96 | 硬质合金孔锯(米塔科，Φ16毫米) MCS-16 | MCS-16 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1394-97 | 硬质合金孔锯(米塔科，Φ18mm) MCS-18 | MCS-18 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1394-98 | 硬质合金孔锯(米塔科，Φ19毫米) MCS-19 | MCS-19 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1394-99 | 硬质合金孔锯(米塔科，Φ20mm) MCS-20 | MCS-20 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1395-01 | 硬质合金孔锯(金属，Φ21公厘) MCS-21 | MCS-21 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1395-02 | 硬质合金孔锯(米塔科，Φ22毫米) MCS-22 | MCS-22 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1395-03 | 硬质合金孔锯(米塔科，Φ23毫米) MCS-23 | MCS-23 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1395-04 | 硬质合金孔锯(金属，Φ24公厘) MCS-24 | MCS-24 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1395-05 | 硬质合金孔锯(金属，Φ25公厘) MCS-25 | MCS-25 | Hall saw | Cemented carbide | 1piece | JPY: 4,150 | USD: 25.82 |
|
|
 |
61-1395-06 | 硬质合金孔锯(金属，Φ26mm) MCS-26 | MCS-26 | Hall saw | Cemented carbide | 1piece | JPY: 4,860 | USD: 30.24 |
|
|
 |
61-1395-07 | 硬质合金孔锯(米塔科，Φ27毫米) MCS-27 | MCS-27 | Hall saw | Cemented carbide | 1piece | JPY: 4,860 | USD: 30.24 |
|
|
 |
61-1395-08 | 硬质合金孔锯(金属，Φ28mm) MCS-28 | MCS-28 | Hall saw | Cemented carbide | 1piece | JPY: 4,860 | USD: 30.24 |
|
|
 |
61-1395-09 | 硬质合金孔锯(金属，Φ29公厘) MCS-29 | MCS-29 | Hall saw | Cemented carbide | 1piece | JPY: 4,860 | USD: 30.24 |
|
|
 |
61-1395-10 | 硬质合金孔锯(米塔科，Φ30公厘) MCS-30 | MCS-30 | Hall saw | Cemented carbide | 1piece | JPY: 4,860 | USD: 30.24 |
|
|
 |
61-1395-11 | 硬质合金孔锯(米塔科，Φ31毫米) MCS-31 | MCS-31 | Hall saw | Cemented carbide | 1piece | JPY: 5,580 | USD: 34.72 |
|
|
 |
61-1395-12 | 硬质合金孔锯(米塔科，Φ32毫米) MCS-32 | MCS-32 | Hall saw | Cemented carbide | 1piece | JPY: 5,580 | USD: 34.72 |
|
|
 |
61-1395-13 | 硬质合金孔锯(金属，Φ33mm) MCS-33 | MCS-33 | Hall saw | Cemented carbide | 1piece | JPY: 5,580 | USD: 34.72 |
|
|
 |
61-1395-14 | 硬质合金孔锯(米塔科，Φ34毫米) MCS-34 | MCS-34 | Hall saw | Cemented carbide | 1piece | JPY: 5,580 | USD: 34.72 |
|
|
 |
61-1395-15 | 硬质合金孔锯(米塔科，Φ35mm) MCS-35 | MCS-35 | Hall saw | Cemented carbide | 1piece | JPY: 5,580 | USD: 34.72 |
|
|
 |
61-1395-16 | 硬质合金孔锯(米塔科，Φ38mm) MCS-38 | MCS-38 | Hall saw | Cemented carbide | 1piece | JPY: 6,510 | USD: 40.51 |
|
|
 |
61-1395-17 | 硬质合金孔锯(米塔科，Φ39毫米) MCS-39 | MCS-39 | Hall saw | Cemented carbide | 1piece | JPY: 6,510 | USD: 40.51 |
|
|
 |
61-1395-18 | 硬质合金孔锯(金属，Φ40公厘) MCS-40 | MCS-40 | Hall saw | Cemented carbide | 1piece | JPY: 6,510 | USD: 40.51 |
|
|
 |
61-1395-19 | 硬质合金孔锯(米塔科，Φ42毫米) MCS-42 | MCS-42 | Hall saw | Cemented carbide | 1piece | JPY: 7,510 | USD: 46.73 |
|
|
 |
61-1395-20 | 硬质合金孔锯(米塔科，Φ45mm) MCS-45 | MCS-45 | Hall saw | Cemented carbide | 1piece | JPY: 7,510 | USD: 46.73 |
|
|
 |
61-1395-21 | 硬质合金孔锯(米塔科，Φ50mm) MCS-50 | MCS-50 | Hall saw | Cemented carbide | 1piece | JPY: 8,500 | USD: 52.89 |
|
|
 |
61-1395-22 | 硬质合金孔锯(金属，Φ53公厘) MCS-53 | MCS-53 | Hall saw | Cemented carbide | 1piece | JPY: 9,360 | USD: 58.24 |
|
|
 |
61-1395-23 | 硬质合金孔锯(米塔科，Φ55mm) MCS-55 | MCS-55 | Hall saw | Cemented carbide | 1piece | JPY: 9,360 | USD: 58.24 |
|
|
 |
61-1395-24 | 硬质合金孔锯(米塔科，Φ60毫米) MCS-60 | MCS-60 | Hall saw | Cemented carbide | 1piece | JPY: 12,200 | USD: 75.91 |
|
|
 |
61-1395-25 | 硬质合金孔锯(米塔科，Φ65公厘) MCS-65 | MCS-65 | Hall saw | Cemented carbide | 1piece | JPY: 12,200 | USD: 75.91 |
|
|
 |
61-1395-26 | 硬质合金孔锯(米塔科，Φ70毫米) MCS-70 | MCS-70 | Hall saw | Cemented carbide | 1piece | JPY: 13,900 | USD: 86.49 |
|
|
 |
61-1395-27 | 硬质合金孔锯(金属，Φ75mm) MCS-75 | MCS-75 | Hall saw | Cemented carbide | 1piece | JPY: 14,900 | USD: 92.71 |
|
|
 |
61-1395-28 | 硬质合金孔锯(金属，Φ80mm) MCS-80 | MCS-80 | Hall saw | Cemented carbide | 1piece | JPY: 16,100 | USD: 100.17 |
|
|
 |
61-1395-29 | 硬质合金孔锯(金属，Φ90公厘) MCS-90 | MCS-90 | Hall saw | Cemented carbide | 1piece | JPY: 19,300 | USD: 120.09 |
|
|
 |
61-1395-30 | 硬质合金孔锯(金属，Φ100公厘) MCS-100 | MCS-100 | Hall saw | Cemented carbide | 1piece | JPY: 21,600 | USD: 134.40 |
|