61-1289-21 球端铣削(2刀锋、长颈、球半径:1.75 x刀锋长度:2.6 x头部:45公厘) MP2XLBR0175N450
功能
- It exhibits excellent wear resistance in a wide range of work materials, from carbon steel to high hardness steel.
- Uses a seamless blade shape with no connection between the ball end blade and the outer edge blade, resulting in an improved surface roughness compared to conventional products.
- Work materials: from raw materials to high hardness steel (~55HRC), austenitic stainless steel, and difficult-to-cut materials.
规格
- 球半径 (mm) :1.75
- 刀锋长度 (mm) :2.6
- 长度 (mm) :90
- 树干直径 (mm) :6
- 刀锋数量:2个
- 头下长度 (mm) :45
- 表面处理:PVD涂层
- 螺旋角30°
- 极细颗粒硬质合金 (UWC)
- 用途:工件:原料来自淬火硬度 (50 HRC) 、奥氏体不锈钢、难加工材料。
- 原籍国:日本
- 制造商型号:MP2XLBR0175N450
- 代码号:665-7389
封装大小：103×14×11 mm 30 g [关于封装大小]
| 第号命令。 | 61-1289-21 | |
|---|---|---|
| 型号号。 | MP2XLBR0175N450 | |
| JAN代码 | 4994196626518 | |
| 标准价格 |
JPY: 11,500
USD: 71.55
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 数量 | 1piece | |
| 日本股票 |
|
|
| 供应商存货 |
|
|
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Ball radius |
Blade length |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1289-01 | 球端铣削(2刀锋、长颈、球半径:1.25 x刀锋长度:1.9 x头部:10公厘) MP2XLBR0125N100 | MP2XLBR0125N100 | 1.25mm | 1.9mm | 1piece | JPY: 5,340 | USD: 33.23 |
|
|
 |
61-1289-02 | 球端铣削(2刀锋、长颈、球半径:1.25 x刀锋长度:1.9 x头部:15公厘) MP2XLBR0125N150 | MP2XLBR0125N150 | 1.25mm | 1.9mm | 1piece | JPY: 6,320 | USD: 39.32 |
|
|
 |
61-1289-03 | 球端铣削(2刀锋、长颈、球半径:1.25 x刀锋长度:1.9 x头部:20公厘) MP2XLBR0125N200 | MP2XLBR0125N200 | 1.25mm | 1.9mm | 1piece | JPY: 7,430 | USD: 46.23 |
|
|
 |
61-1289-04 | 球端铣削(2刀锋、长颈、球半径:1.25 x刀锋长度:1.9 x头部:25公厘) MP2XLBR0125N250 | MP2XLBR0125N250 | 1.25mm | 1.9mm | 1piece | JPY: 7,930 | USD: 49.34 |
|
|
 |
61-1289-05 | 球端铣削(2刀锋、长颈、球半径:1.25 x刀锋长度:1.9 x头部:30公厘) MP2XLBR0125N300 | MP2XLBR0125N300 | 1.25mm | 1.9mm | 1piece | JPY: 7,930 | USD: 49.34 |
|
|
 |
61-1289-06 | 球端铣削(2刀锋、长颈、球半径:1.25 x刀锋长度:1.9 x头部:35公厘) MP2XLBR0125N350 | MP2XLBR0125N350 | 1.25mm | 1.9mm | 1piece | JPY: 9,160 | USD: 56.99 |
|
|
 |
61-1289-07 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:6公厘) MP2XLBR0150N060S03 | MP2XLBR0150N060S03 | 1.5mm | 2.3mm | 1piece | JPY: 4,350 | USD: 27.07 |
|
|
 |
61-1289-08 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:8公厘) MP2XLBR0150N080 | MP2XLBR0150N080 | 1.5mm | 2.3mm | 1piece | JPY: 4,920 | USD: 30.61 |
|
|
 |
61-1289-09 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:10公厘) MP2XLBR0150N100 | MP2XLBR0150N100 | 1.5mm | 2.3mm | 1piece | JPY: 4,920 | USD: 30.61 |
|
|
 |
61-1289-10 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:12公厘) MP2XLBR0150N120 | MP2XLBR0150N120 | 1.5mm | 2.3mm | 1piece | JPY: 5,140 | USD: 31.98 |
|
|
 |
61-1289-11 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:14公厘) MP2XLBR0150N140 | MP2XLBR0150N140 | 1.5mm | 2.3mm | 1piece | JPY: 5,710 | USD: 35.53 |
|
|
 |
61-1289-12 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:16公厘) MP2XLBR0150N160 | MP2XLBR0150N160 | 1.5mm | 2.3mm | 1piece | JPY: 5,710 | USD: 35.53 |
|
|
 |
61-1289-13 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:20公厘) MP2XLBR0150N200 | MP2XLBR0150N200 | 1.5mm | 2.3mm | 1piece | JPY: 5,480 | USD: 34.10 |
|
|
 |
61-1289-14 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:25公厘) MP2XLBR0150N250 | MP2XLBR0150N250 | 1.5mm | 2.3mm | 1piece | JPY: 5,480 | USD: 34.10 |
|
|
 |
61-1289-15 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:30公厘) MP2XLBR0150N300 | MP2XLBR0150N300 | 1.5mm | 2.3mm | 1piece | JPY: 6,930 | USD: 43.12 |
|
|
 |
61-1289-16 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:35公厘) MP2XLBR0150N350 | MP2XLBR0150N350 | 1.5mm | 2.3mm | 1piece | JPY: 8,790 | USD: 54.69 |
|
|
 |
61-1289-17 | 球端铣削(2刀锋、长颈、球半径:1.5 x刀锋长度:2.3 x头部:40公厘) MP2XLBR0150N400 | MP2XLBR0150N400 | 1.5mm | 2.3mm | 1piece | JPY: 10,900 | USD: 67.82 |
|
|
 |
61-1289-18 | 球端铣削(2刀锋、长颈、球半径:1.75 x刀锋长度:2.6 x头部:15公厘) MP2XLBR0175N150 | MP2XLBR0175N150 | 1.75mm | 2.6mm | 1piece | JPY: 6,930 | USD: 43.12 |
|
|
 |
61-1289-19 | 球端铣削(2刀锋、长颈、球半径:1.75 x刀锋长度:2.6 x头部:25公厘) MP2XLBR0175N250 | MP2XLBR0175N250 | 1.75mm | 2.6mm | 1piece | JPY: 7,430 | USD: 46.23 |
|
|
 |
61-1289-20 | 球端铣削(2刀锋、长颈、球半径:1.75 x刀锋长度:2.6 x头部:35公厘) MP2XLBR0175N350 | MP2XLBR0175N350 | 1.75mm | 2.6mm | 1piece | JPY: 9,570 | USD: 59.55 |
|
|
 |
61-1289-21 | 球端铣削(2刀锋、长颈、球半径:1.75 x刀锋长度:2.6 x头部:45公厘) MP2XLBR0175N450 | MP2XLBR0175N450 | 1.75mm | 2.6mm | 1piece | JPY: 11,500 | USD: 71.55 |
|