61-1288-21 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x颈长:9公厘) MP2XLBR0050N090
功能
- It exhibits excellent wear resistance in a wide range of work materials, from carbon steel to high hardness steel.
- Uses a seamless blade shape with no connection between the ball end blade and the outer edge blade, resulting in an improved surface roughness compared to conventional products.
- Work materials: from raw materials to high hardness steel (~55HRC), austenitic stainless steel, and difficult-to-cut materials.
规格
- 球半径 (mm) :0.5
- 刀锋长度 (mm) :0.75
- 长度 (mm) :50
- 树干直径 (mm) :4
- 刀锋数量:2个
- 头下长度 (mm) :9
- 表面处理:PVD涂层
- 螺旋角30°
- 极细颗粒硬质合金 (UWC)
- 用途:工件:原料来自淬火硬度 (50 HRC) 、奥氏体不锈钢、难加工材料。
- 原籍国:日本
- 制造商型号:MP2XLBR0050N090
- 代码号:665-6391
封装大小：45×160×5 mm 200 g [关于封装大小]
| 第号命令。 | 61-1288-21 | |
|---|---|---|
| 型号号。 | MP2XLBR0050N090 | |
| JAN代码 | 4994196625528 | |
| 标准价格 |
JPY: 4,370
USD: 27.19
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 数量 | 1piece | |
| 日本股票 |
|
|
| 供应商存货 |
|
|
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Length |
Shank diameter |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1288-10 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x颈下长度:3公厘) MP2XLBR0050N030 | MP2XLBR0050N030 | 50mm | 4mm | 1piece | JPY: 3,930 | USD: 24.45 |
|
|
 |
61-1288-12 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x颈下长度:4公厘) MP2XLBR0050N040 | MP2XLBR0050N040 | 50mm | 4mm | 1piece | JPY: 3,930 | USD: 24.45 |
|
|
 |
61-1288-14 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x颈长:5公厘) MP2XLBR0050N050 | MP2XLBR0050N050 | 50mm | 4mm | 1piece | JPY: 3,930 | USD: 24.45 |
|
|
 |
61-1288-16 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:6公厘) MP2XLBR0050N060 | MP2XLBR0050N060 | 50mm | 4mm | 1piece | JPY: 4,240 | USD: 26.38 |
|
|
 |
61-1288-18 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:7公厘) MP2XLBR0050N070 | MP2XLBR0050N070 | 50mm | 4mm | 1piece | JPY: 4,240 | USD: 26.38 |
|
|
 |
61-1288-19 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:8公厘) MP2XLBR0050N080 | MP2XLBR0050N080 | 50mm | 4mm | 1piece | JPY: 4,240 | USD: 26.38 |
|
|
 |
61-1288-21 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x颈长:9公厘) MP2XLBR0050N090 | MP2XLBR0050N090 | 50mm | 4mm | 1piece | JPY: 4,370 | USD: 27.19 |
|
|
 |
61-1288-22 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:10公厘) MP2XLBR0050N100 | MP2XLBR0050N100 | 50mm | 4mm | 1piece | JPY: 4,370 | USD: 27.19 |
|
|
 |
61-1288-24 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:12公厘) MP2XLBR0050N120 | MP2XLBR0050N120 | 50mm | 4mm | 1piece | JPY: 4,370 | USD: 27.19 |
|
|
 |
61-1288-11 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x颈下长度:3公厘) MP2XLBR0050N030S06 | MP2XLBR0050N030S06 | 50mm | 6mm | 1piece | JPY: 6,080 | USD: 37.83 |
|
|
 |
61-1288-13 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x颈下长度:4公厘) MP2XLBR0050N040S06 | MP2XLBR0050N040S06 | 50mm | 6mm | 1piece | JPY: 6,700 | USD: 41.69 |
|
|
 |
61-1288-15 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x颈长:5公厘) MP2XLBR0050N050S06 | MP2XLBR0050N050S06 | 50mm | 6mm | 1piece | JPY: 6,700 | USD: 41.69 |
|
|
 |
61-1288-17 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:6公厘) MP2XLBR0050N060S06 | MP2XLBR0050N060S06 | 50mm | 6mm | 1piece | JPY: 7,070 | USD: 43.99 |
|
|
 |
61-1288-20 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:8公厘) MP2XLBR0050N080S06 | MP2XLBR0050N080S06 | 50mm | 6mm | 1piece | JPY: 7,070 | USD: 43.99 |
|
|
 |
61-1288-26 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:14公厘) MP2XLBR0050N140 | MP2XLBR0050N140 | 55mm | 4mm | 1piece | JPY: 5,450 | USD: 33.91 |
|
|
 |
61-1288-27 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:16公厘) MP2XLBR0050N160 | MP2XLBR0050N160 | 55mm | 4mm | 1piece | JPY: 6,440 | USD: 40.07 |
|
|
 |
61-1288-29 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:18公厘) MP2XLBR0050N180 | MP2XLBR0050N180 | 55mm | 4mm | 1piece | JPY: 6,440 | USD: 40.07 |
|
|
 |
61-1288-30 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:20公厘) MP2XLBR0050N200 | MP2XLBR0050N200 | 55mm | 4mm | 1piece | JPY: 7,810 | USD: 48.59 |
|
|
 |
61-1288-23 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:10公厘) MP2XLBR0050N100S06 | MP2XLBR0050N100S06 | 60mm | 6mm | 1piece | JPY: 7,070 | USD: 43.99 |
|
|
 |
61-1288-25 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:12公厘) MP2XLBR0050N120S06 | MP2XLBR0050N120S06 | 60mm | 6mm | 1piece | JPY: 7,070 | USD: 43.99 |
|
|
 |
61-1288-28 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:16公厘) MP2XLBR0050N160S06 | MP2XLBR0050N160S06 | 65mm | 6mm | 1piece | JPY: 9,300 | USD: 57.87 |
|
|
 |
61-1288-31 | 球端铣削(2刀锋、长颈、球半径:0.5 x刀锋长度:0.75 x头部:20公厘) MP2XLBR0050N200S06 | MP2XLBR0050N200S06 | 65mm | 6mm | 1piece | JPY: 11,100 | USD: 69.06 |
|