61-1287-21 球端铣削(2刀锋，长颈，球半径:0.15 x刀锋长度:0.24 x刀头:0.5公厘) MP2XLBR0015N005
功能
- It exhibits excellent wear resistance in a wide range of work materials, from carbon steel to high hardness steel.
- Uses a seamless blade shape with no connection between the ball end blade and the outer edge blade, resulting in an improved surface roughness compared to conventional products.
- Work materials: from raw materials to high hardness steel (~55HRC), austenitic stainless steel, and difficult-to-cut materials.
规格
- 球半径 (mm) :0.15
- 刀锋长度 (mm) :0.24
- 长度 (mm) :50
- 树干直径 (mm) :4
- 刀锋数量:2个
- 头下长度 (mm) :0.5
- 表面处理:PVD涂层
- 螺旋角30°
- 极细颗粒硬质合金 (UWC)
- 用途:工件:原料来自淬火硬度 (50 HRC) 、奥氏体不锈钢、难加工材料。
- 原籍国:日本
- 制造商型号:MP2XLBR0015N005
- 代码号:665-5408
封装大小：12×69×11 mm 10 g [关于封装大小]
| 第号命令。 | 61-1287-21 | |
|---|---|---|
| 型号号。 | MP2XLBR0015N005 | |
| JAN代码 | 4994196624408 | |
| 标准价格 |
JPY: 7,230
USD: 45.32
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 数量 | 1piece | |
| 日本股票 |
|
|
| 供应商存货 |
|
|
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Shank diameter |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|
 |
61-1287-21 | 球端铣削(2刀锋，长颈，球半径:0.15 x刀锋长度:0.24 x刀头:0.5公厘) MP2XLBR0015N005 | MP2XLBR0015N005 | 4mm | 1piece | JPY: 7,230 | USD: 45.32 |
|
|
 |
61-1287-22 | 球端铣削(2刀锋、长颈、球半径:0.15 x刀锋长度:0.24 x头部:0.75公厘) MP2XLBR0015N008 | MP2XLBR0015N008 | 4mm | 1piece | JPY: 7,230 | USD: 45.32 |
|
|
 |
61-1287-23 | 球端铣削(2刀锋、长颈、球半径:0.15 x刀锋长度:0.24 x颈下长度:1公厘) MP2XLBR0015N010 | MP2XLBR0015N010 | 4mm | 1piece | JPY: 7,230 | USD: 45.32 |
|
|
 |
61-1287-25 | 球端铣削(2刀锋，长颈，球半径:0.15 x刀锋长度:0.24 x头部:1.25公厘) MP2XLBR0015N013 | MP2XLBR0015N013 | 4mm | 1piece | JPY: 7,750 | USD: 48.58 |
|
|
 |
61-1287-27 | 球端铣削(2刀锋、长颈、球半径:0.15 x刀锋长度:0.24 x头部:1.5公厘) MP2XLBR0015N015 | MP2XLBR0015N015 | 4mm | 1piece | JPY: 7,750 | USD: 48.58 |
|
|
 |
61-1287-29 | 球端铣削(2刀锋、长颈、球半径:0.15 x刀锋长度:0.24 x头部:1.75公厘) MP2XLBR0015N018 | MP2XLBR0015N018 | 4mm | 1piece | JPY: 7,750 | USD: 48.58 |
|
|
 |
61-1287-30 | 球端铣削(2刀锋、长颈、球半径:0.15 x刀锋长度:0.24 x颈下长度:2公厘) MP2XLBR0015N020 | MP2XLBR0015N020 | 4mm | 1piece | JPY: 7,750 | USD: 48.58 |
|
|
 |
61-1287-31 | 球端铣削(2刀锋，长颈，球半径:0.15 x刀锋长度:0.24 x头部:2.5公厘) MP2XLBR0015N025 | MP2XLBR0015N025 | 4mm | 1piece | JPY: 7,960 | USD: 49.90 |
|
|
 |
61-1287-32 | 球端铣削(2刀锋、长颈、球半径:0.15 x刀锋长度:0.24 x颈下长度:3公厘) MP2XLBR0015N030 | MP2XLBR0015N030 | 4mm | 1piece | JPY: 7,960 | USD: 49.90 |
|
|
 |
61-1287-33 | 球端铣削(2刀锋，长颈，球半径:0.15 x刀锋长度:0.24 x头部:3.5公厘) MP2XLBR0015N035 | MP2XLBR0015N035 | 4mm | 1piece | JPY: 7,960 | USD: 49.90 |
|
|
 |
61-1287-34 | 球端铣削(2刀锋、长颈、球半径:0.15 x刀锋长度:0.24 x颈下长度:4公厘) MP2XLBR0015N040 | MP2XLBR0015N040 | 4mm | 1piece | JPY: 8,260 | USD: 51.78 |
|
|
 |
61-1287-24 | 球端铣削(2刀锋、长颈、球半径:0.15 x刀锋长度:0.24 x颈下长度:1公厘) MP2XLBR0015N010S06 | MP2XLBR0015N010S06 | 6mm | 1piece | JPY: 9,850 | USD: 61.74 |
|
|
 |
61-1287-26 | 球端铣削(2刀锋，长颈，球半径:0.15 x刀锋长度:0.24 x头部:1.25公厘) MP2XLBR0015N013S06 | MP2XLBR0015N013S06 | 6mm | 1piece | JPY: 10,690 | USD: 67.01 |
|
|
 |
61-1287-28 | 球端铣削(2刀锋、长颈、球半径:0.15 x刀锋长度:0.24 x头部:1.5公厘) MP2XLBR0015N015S06 | MP2XLBR0015N015S06 | 6mm | 1piece | JPY: 10,690 | USD: 67.01 |
|