61-1285-21 ［已停用］Endmill (OptiMill-Composite、SCM 480、Composite、Φ6 x刀锋长度:25) SCM480-0600Z04R-S-HA-HC619
功能
- We have achieved excellent finish in the processing of composite materials such as CFRP.
- Low cutting resistance in the thrust direction due to the weak twist angle reduces burrs and delamination.
- Work Material: Composite material, such as CFRP.
规格
- 叶片直径 (mm) :6
- 刀锋长度 (mm) :25
- 长度 (mm) :63.5
- 树干直径 (mm) :6
- 刀锋数量:4个
- 表面处理:HC619金刚石涂层
- 螺丝是角度:12.5°
- 超细颗粒硬质合金 (微小颗粒碳化物)
- 应用:工件:CFRP,复合材料。
- 生产国:德国
- 制造商型号:SCM4800600Z04RSHAHC619
- 代码号:491-0851
封装大小：69×13×13 mm 20 g [关于封装大小]
| 第号命令。 | 61-1285-21 | |
|---|---|---|
| 型号号。 | SCM480-0600Z04R-S-HA-HC619 | |
| 标准价格 |
JPY: 41,250
USD: 258.57
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 数量 | 1piece | |
|
||
| 日本股票 | - | |
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Blade diameter |
Blade length |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1285-21 | ［已停用］Endmill (OptiMill-Composite、SCM 480、Composite、Φ6 x刀锋长度:25) SCM480-0600Z04R-S-HA-HC619 | SCM480-0600Z04R-S-HA-HC619 | 6.0mm | 25.0mm | 1piece | JPY: 41,250 | USD: 258.57 |
-
|
|
 |
61-1285-22 | ［已停用］Endmill (OptiMill-Composite, SCM 480, Composite,Φ6.35 x刀锋长度:25.4) SCM480-06350Z04R-S-HA-HC619 | SCM480-06350Z04R-S-HA-HC619 | 6.35mm | 25.4mm | 1piece | JPY: 44,156 | USD: 276.79 |
-
|
|
 |
61-1285-23 | ［已停用］Endmill (OptiMill-Composite、SCM 480、Composite、Φ8 x刀锋长度:30) SCM480-0800Z08R-S-HA-HC619 | SCM480-0800Z08R-S-HA-HC619 | 8.0mm | 30.0mm | 1piece | JPY: 44,156 | USD: 276.79 |
-
|
|
 |
61-1285-24 | ［已停用］Endmill (OptiMill-Composite, SCM 480, Composite,Φ9.53 x刀锋长度:28.58) SCM480-09525Z04R-S-HA-HC619 | SCM480-09525Z04R-S-HA-HC619 | 9.53mm | 28.58mm | 1piece | JPY: 52,781 | USD: 330.85 |
-
|
|
 |
61-1285-25 | ［已停用］Endmill (OptiMill-Composite、SCM 480、Composite、Φ10 x刀锋长度:40) SCM480-1000Z04R-S-HA-HC619 | SCM480-1000Z04R-S-HA-HC619 | 10.0mm | 40.0mm | 1piece | JPY: 52,781 | USD: 330.85 |
-
|
|
 |
61-1285-26 | ［已停用］Endmill (OptiMill-Composite, SCM 480, Composite,Φ12 x刀锋长度:40) SCM480-1200Z04R-S-HA-HC619 | SCM480-1200Z04R-S-HA-HC619 | 12.0mm | 40.0mm | 1piece | JPY: 74,344 | USD: 466.02 |
-
|
|
 |
61-1285-27 | ［已停用］Endmill (OptiMill-Composite, SCM 480, Composite,Φ16 x刀锋长度:40) SCM480-1600Z04R-S-HA-HC619 | SCM480-1600Z04R-S-HA-HC619 | 16.0mm | 40.0mm | 1piece | JPY: 96,375 | USD: 604.12 |
-
|
|
 |
61-1285-28 | ［已停用］Endmill (OptiMill-Composite、SCM 480、Composite、Φ20 x刀锋长度:42) SCM480-2000Z04R-S-HA-HC611 | SCM480-2000Z04R-S-HA-HC611 | 20.0mm | 42.0mm | 1piece | JPY: 150,469 | USD: 943.20 |
-
|