61-1274-21 ［已停用］SuperOne-CutEndmill (4刀锋，Φ4×刀锋长度11 mm) DZ-SOCS4040-10
功能
- The use of an independently developed breaker groove (patent pending) achieves both high chip discharge and tool rigidity. (High feed/grooving is possible.)
- All-around for general steel, stainless steel and high hardness materials (~50HRC).
- Work Material: Carbon Steel, Alloy Steel, Tool Steel (~40HRC), Pre-Hardened Steel (~43HRC), Cast Iron, Ductile Cast Iron (~350HB), Quenched Steel (~50HRC), Stainless Steel (~35HRC).
规格
- 叶片直径 (mm) :4
- 刀锋长度 (mm) :11
- 长度 (mm) :60
- 树干直径 (mm) :6
- 转角 (公厘) :1.0
- 表面处理:DZ涂层 (tiAlN系统)
- 螺丝的角度为45°
- 通过ISO 14001认证的工厂
- 硬质合金 (碳化物)
- 应用:工件:碳钢、合金钢、碳工具钢 (HRC40) 、预硬钢 (HRC43) 、铸铁、大乐瓷砖铸铁 (HB350) 、硬质钢 (HRC50) 、不锈钢 (HRC35) 。
- 原籍国:日本
- 制造商型号:DZSOCS404010
- 代码号:208-1822
封装大小：15×63×14 mm 30 g [关于封装大小]
| 第号命令。 | 61-1274-21 | |
|---|---|---|
| 型号号。 | DZ-SOCS4040-10 | |
| JAN代码 | 4547328102772 | |
| 标准价格 |
JPY: 9,250
USD: 57.98
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 数量 | 1piece | |
|
||
| 日本股票 | - | |
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Blade diameter |
Blade length |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1274-73 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ3×刀锋长度5公厘) DZ-SOCLS4030 | DZ-SOCLS4030 | 3.0mm | 5.0mm | 1piece | JPY: 7,513 | USD: 47.10 |
-
|
|
 |
61-1273-67 | SuperOne-CutEndmill (4刀锋，Φ3×刀锋长度8公厘) DZ-SOCS4030 | DZ-SOCS4030 | 3.0mm | 8.0mm | 1piece | JPY: 6,810 | USD: 42.69 |
|
|
 |
61-1274-17 | SuperOne-CutEndmill (4刀锋，Φ3×刀锋长度8公厘) DZ-SOCS4030-02 | DZ-SOCS4030-02 | 3.0mm | 8.0mm | 1piece | JPY: 9,490 | USD: 59.49 |
|
|
 |
61-1274-18 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ3×刀锋长度8公厘) DZ-SOCS4030-05 | DZ-SOCS4030-05 | 3.0mm | 8.0mm | 1piece | JPY: 8,788 | USD: 55.09 |
-
|
|
 |
61-1273-92 | SuperOne-CutEndmill (4刀锋，Φ3×刀锋长度16 mm) DZ-SOCM4030 | DZ-SOCM4030 | 3.0mm | 16.0mm | 1piece | JPY: 8,180 | USD: 51.28 |
|
|
 |
61-1274-74 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ4×刀锋长度6公厘) DZ-SOCLS4040 | DZ-SOCLS4040 | 4.0mm | 6.0mm | 1piece | JPY: 7,863 | USD: 49.29 |
-
|
|
 |
61-1273-68 | SuperOne-CutEndmill (4刀锋，Φ4×刀锋长度11 mm) DZ-SOCS4040 | DZ-SOCS4040 | 4.0mm | 11.0mm | 1piece | JPY: 7,070 | USD: 44.32 |
|
|
 |
61-1274-19 | SuperOne-CutEndmill (4刀锋，Φ4×刀锋长度11 mm) DZ-SOCS4040-02 | DZ-SOCS4040-02 | 4.0mm | 11.0mm | 1piece | JPY: 9,990 | USD: 62.62 |
|
|
 |
61-1274-20 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ4×刀锋长度11 mm) DZ-SOCS4040-05 | DZ-SOCS4040-05 | 4.0mm | 11.0mm | 1piece | JPY: 9,250 | USD: 57.98 |
-
|
|
 |
61-1274-21 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ4×刀锋长度11 mm) DZ-SOCS4040-10 | DZ-SOCS4040-10 | 4.0mm | 11.0mm | 1piece | JPY: 9,250 | USD: 57.98 |
-
|
|
 |
61-1273-93 | SuperOne-CutEndmill (4刀锋，Φ4×刀锋长度18 mm) DZ-SOCM4040 | DZ-SOCM4040 | 4.0mm | 18.0mm | 1piece | JPY: 8,490 | USD: 53.22 |
|
|
 |
61-1274-75 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ5×刀锋长度8公厘) DZ-SOCLS4050 | DZ-SOCLS4050 | 5.0mm | 8.0mm | 1piece | JPY: 9,088 | USD: 56.97 |
-
|
|
 |
61-1273-69 | SuperOne-CutEndmill (4刀锋，Φ5×刀锋长度13 mm) DZ-SOCS4050 | DZ-SOCS4050 | 5.0mm | 13.0mm | 1piece | JPY: 7,600 | USD: 47.64 |
|
|
 |
61-1274-22 | SuperOne-CutEndmill (4刀锋，Φ5×刀锋长度13 mm) DZ-SOCS4050-02 | DZ-SOCS4050-02 | 5.0mm | 13.0mm | 1piece | JPY: 10,650 | USD: 66.76 |
|
|
 |
61-1274-23 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ5×刀锋长度13 mm) DZ-SOCS4050-05 | DZ-SOCS4050-05 | 5.0mm | 13.0mm | 1piece | JPY: 9,863 | USD: 61.83 |
-
|
|
 |
61-1274-24 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ5×刀锋长度13 mm) DZ-SOCS4050-10 | DZ-SOCS4050-10 | 5.0mm | 13.0mm | 1piece | JPY: 9,863 | USD: 61.83 |
-
|
|
 |
61-1273-94 | SuperOne-CutEndmill (4刀锋，Φ5×刀锋长度21 mm) DZ-SOCM4050 | DZ-SOCM4050 | 5.0mm | 21.0mm | 1piece | JPY: 9,150 | USD: 57.36 |
|
|
 |
61-1274-76 | SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度9公厘) DZ-SOCLS4060 | DZ-SOCLS4060 | 6.0mm | 9.0mm | 1piece | JPY: 10,150 | USD: 63.62 |
|
|
 |
61-1274-77 | SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度9公厘) DZ-SOCLS4060-S5.8 | DZ-SOCLS4060-S5.8 | 6.0mm | 9.0mm | 1piece | JPY: 11,230 | USD: 70.39 |
|
|
 |
61-1274-98 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度9公厘) DZ-SOCLS4060-05 | DZ-SOCLS4060-05 | 6.0mm | 9.0mm | 1piece | JPY: 19,713 | USD: 123.57 |
-
|
|
 |
61-1274-99 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度9公厘) DZ-SOCLS4060-10 | DZ-SOCLS4060-10 | 6.0mm | 9.0mm | 1piece | JPY: 19,713 | USD: 123.57 |
-
|
|
 |
61-1273-70 | SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度13 mm) DZ-SOCS4060 | DZ-SOCS4060 | 6.0mm | 13.0mm | 1piece | JPY: 7,860 | USD: 49.27 |
|
|
 |
61-1274-25 | SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度13 mm) DZ-SOCS4060-03 | DZ-SOCS4060-03 | 6.0mm | 13.0mm | 1piece | JPY: 10,990 | USD: 68.89 |
|
|
 |
61-1274-26 | SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度13 mm) DZ-SOCS4060-05 | DZ-SOCS4060-05 | 6.0mm | 13.0mm | 1piece | JPY: 10,990 | USD: 68.89 |
|
|
 |
61-1274-27 | SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度13 mm) DZ-SOCS4060-10 | DZ-SOCS4060-10 | 6.0mm | 13.0mm | 1piece | JPY: 10,990 | USD: 68.89 |
|
|
 |
61-1274-28 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度13 mm) DZ-SOCS4060-15 | DZ-SOCS4060-15 | 6.0mm | 13.0mm | 1piece | JPY: 10,175 | USD: 63.78 |
-
|
|
 |
61-1273-95 | SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度21 mm) DZ-SOCM4060 | DZ-SOCM4060 | 6.0mm | 21.0mm | 1piece | JPY: 9,410 | USD: 58.99 |
|
|
 |
61-1274-11 | SuperOne-CutEndmill (4刀锋，Φ6×刀锋长度25 mm) DZ-SOCL4060 | DZ-SOCL4060 | 6.0mm | 25.0mm | 1piece | JPY: 13,820 | USD: 86.63 |
|
|
 |
61-1274-78 | SuperOne-CutEndmill (4刀锋，Φ7×刀锋长度9公厘) DZ-SOCLS4070 | DZ-SOCLS4070 | 7.0mm | 9.0mm | 1piece | JPY: 11,570 | USD: 72.53 |
|
|
 |
61-1274-79 | SuperOne-CutEndmill (4刀锋，Φ7×刀锋长度9公厘) DZ-SOCLS4070-S6.8 | DZ-SOCLS4070-S6.8 | 7.0mm | 9.0mm | 1piece | JPY: 12,730 | USD: 79.80 |
|
|
 |
61-1273-71 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ7×刀锋长度16 mm) DZ-SOCS4070 | DZ-SOCS4070 | 7.0mm | 16.0mm | 1piece | JPY: 10,400 | USD: 65.19 |
-
|
|
 |
61-1273-96 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ7×刀锋长度24 mm) DZ-SOCM4070 | DZ-SOCM4070 | 7.0mm | 24.0mm | 1piece | JPY: 12,563 | USD: 78.75 |
-
|
|
 |
61-1274-80 | SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度12 mm) DZ-SOCLS4080 | DZ-SOCLS4080 | 8.0mm | 12.0mm | 1piece | JPY: 14,560 | USD: 91.27 |
|
|
 |
61-1274-81 | SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度12 mm) DZ-SOCLS4080-S7.8 | DZ-SOCLS4080-S7.8 | 8.0mm | 12.0mm | 1piece | JPY: 16,060 | USD: 100.67 |
|
|
 |
61-1275-01 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度12 mm) DZ-SOCLS4080-05 | DZ-SOCLS4080-05 | 8.0mm | 12.0mm | 1piece | JPY: 24,338 | USD: 152.56 |
-
|
|
 |
61-1275-02 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度12 mm) DZ-SOCLS4080-10 | DZ-SOCLS4080-10 | 8.0mm | 12.0mm | 1piece | JPY: 24,338 | USD: 152.56 |
-
|
|
 |
61-1273-72 | SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度19 mm) DZ-SOCS4080 | DZ-SOCS4080 | 8.0mm | 19.0mm | 1piece | JPY: 11,230 | USD: 70.39 |
|
|
 |
61-1274-29 | SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度19 mm) DZ-SOCS4080-03 | DZ-SOCS4080-03 | 8.0mm | 19.0mm | 1piece | JPY: 15,640 | USD: 98.04 |
|
|
 |
61-1274-30 | SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度19 mm) DZ-SOCS4080-05 | DZ-SOCS4080-05 | 8.0mm | 19.0mm | 1piece | JPY: 15,640 | USD: 98.04 |
|
|
 |
61-1274-31 | SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度19 mm) DZ-SOCS4080-10 | DZ-SOCS4080-10 | 8.0mm | 19.0mm | 1piece | JPY: 15,640 | USD: 98.04 |
|
|
 |
61-1274-32 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度19 mm) DZ-SOCS4080-15 | DZ-SOCS4080-15 | 8.0mm | 19.0mm | 1piece | JPY: 14,488 | USD: 90.82 |
-
|
|
 |
61-1274-33 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度19 mm) DZ-SOCS4080-20 | DZ-SOCS4080-20 | 8.0mm | 19.0mm | 1piece | JPY: 14,488 | USD: 90.82 |
-
|
|
 |
61-1273-97 | SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度26 mm) DZ-SOCM4080 | DZ-SOCM4080 | 8.0mm | 26.0mm | 1piece | JPY: 13,560 | USD: 85.00 |
|
|
 |
61-1274-12 | SuperOne-CutEndmill (4刀锋，Φ8×刀锋长度35 mm) DZ-SOCL4080 | DZ-SOCL4080 | 8.0mm | 35.0mm | 1piece | JPY: 18,970 | USD: 118.91 |
|
|
 |
61-1274-82 | SuperOne-CutEndmill (4刀锋，Φ9×刀锋长度12 mm) DZ-SOCLS4090 | DZ-SOCLS4090 | 9.0mm | 12.0mm | 1piece | JPY: 15,470 | USD: 96.97 |
|
|
 |
61-1274-83 | SuperOne-CutEndmill (4刀锋，Φ9×刀锋长度12 mm) DZ-SOCLS4090-S8.8 | DZ-SOCLS4090-S8.8 | 9.0mm | 12.0mm | 1piece | JPY: 17,060 | USD: 106.94 |
|
|
 |
61-1273-73 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ9×刀锋长度19 mm) DZ-SOCS4090 | DZ-SOCS4090 | 9.0mm | 19.0mm | 1piece | JPY: 13,788 | USD: 86.43 |
-
|
|
 |
61-1273-98 | SuperOne-CutEndmill (4刀锋，Φ9×刀锋长度26 mm) DZ-SOCM4090 | DZ-SOCM4090 | 9.0mm | 26.0mm | 1piece | JPY: 17,970 | USD: 112.64 |
|
|
 |
61-1274-84 | SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度15公厘) DZ-SOCLS4100 | DZ-SOCLS4100 | 10.0mm | 15.0mm | 1piece | JPY: 17,470 | USD: 109.51 |
|
|
 |
61-1274-85 | SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度15公厘) DZ-SOCLS4100-S9.8 | DZ-SOCLS4100-S9.8 | 10.0mm | 15.0mm | 1piece | JPY: 19,220 | USD: 120.48 |
|
|
 |
61-1275-03 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度15公厘) DZ-SOCLS4100-05 | DZ-SOCLS4100-05 | 10.0mm | 15.0mm | 1piece | JPY: 29,650 | USD: 185.86 |
-
|
|
 |
61-1275-04 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度15公厘) DZ-SOCLS4100-10 | DZ-SOCLS4100-10 | 10.0mm | 15.0mm | 1piece | JPY: 29,650 | USD: 185.86 |
-
|
|
 |
61-1273-74 | SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度22公厘) DZ-SOCS4100-S8 | DZ-SOCS4100-S8 | 10.0mm | 22.0mm | 1piece | JPY: 13,480 | USD: 84.50 |
|
|
 |
61-1273-75 | SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度22公厘) DZ-SOCS4100 | DZ-SOCS4100 | 10.0mm | 22.0mm | 1piece | JPY: 13,480 | USD: 84.50 |
|
|
 |
61-1274-34 | SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度22公厘) DZ-SOCS4100-03 | DZ-SOCS4100-03 | 10.0mm | 22.0mm | 1piece | JPY: 18,880 | USD: 118.35 |
|
|
 |
61-1274-35 | SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度22公厘) DZ-SOCS4100-05 | DZ-SOCS4100-05 | 10.0mm | 22.0mm | 1piece | JPY: 18,880 | USD: 118.35 |
|
|
 |
61-1274-36 | SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度22公厘) DZ-SOCS4100-10 | DZ-SOCS4100-10 | 10.0mm | 22.0mm | 1piece | JPY: 18,880 | USD: 118.35 |
|
|
 |
61-1274-37 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度22公厘) DZ-SOCS4100-15 | DZ-SOCS4100-15 | 10.0mm | 22.0mm | 1piece | JPY: 17,488 | USD: 109.62 |
-
|
|
 |
61-1274-38 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度22公厘) DZ-SOCS4100-20 | DZ-SOCS4100-20 | 10.0mm | 22.0mm | 1piece | JPY: 17,488 | USD: 109.62 |
-
|
|
 |
61-1274-52 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度22公厘) DZ-SOCS4100S8-03 | DZ-SOCS4100S8-03 | 10.0mm | 22.0mm | 1piece | JPY: 17,488 | USD: 109.62 |
-
|
|
 |
61-1274-53 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度22公厘) DZ-SOCS4100S8-05 | DZ-SOCS4100S8-05 | 10.0mm | 22.0mm | 1piece | JPY: 17,488 | USD: 109.62 |
-
|
|
 |
61-1274-54 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度22公厘) DZ-SOCS4100S8-10 | DZ-SOCS4100S8-10 | 10.0mm | 22.0mm | 1piece | JPY: 17,488 | USD: 109.62 |
-
|
|
 |
61-1273-99 | SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度34公厘) DZ-SOCM4100 | DZ-SOCM4100 | 10.0mm | 34.0mm | 1piece | JPY: 16,140 | USD: 101.17 |
|
|
 |
61-1274-13 | SuperOne-CutEndmill (4刀锋，Φ10 x刀锋长度45公厘) DZ-SOCL4100 | DZ-SOCL4100 | 10.0mm | 45.0mm | 1piece | JPY: 27,120 | USD: 170.00 |
|
|
 |
61-1274-86 | SuperOne-CutEndmill (4刀锋，Φ11 x刀锋长度15公厘) DZ-SOCLS4110 | DZ-SOCLS4110 | 11.0mm | 15.0mm | 1piece | JPY: 19,880 | USD: 124.62 |
|
|
 |
61-1273-76 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ11 x刀锋长度22公厘) DZ-SOCS4110 | DZ-SOCS4110 | 11.0mm | 22.0mm | 1piece | JPY: 17,875 | USD: 112.05 |
-
|
|
 |
61-1274-01 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ11 x刀锋长度34公厘) DZ-SOCM4110 | DZ-SOCM4110 | 11.0mm | 34.0mm | 1piece | JPY: 21,413 | USD: 134.23 |
-
|
|
 |
61-1274-87 | SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度18公厘) DZ-SOCLS4120 | DZ-SOCLS4120 | 12.0mm | 18.0mm | 1piece | JPY: 23,790 | USD: 149.13 |
|
|
 |
61-1275-05 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度18公厘) DZ-SOCLS4120-05 | DZ-SOCLS4120-05 | 12.0mm | 18.0mm | 1piece | JPY: 37,275 | USD: 233.66 |
-
|
|
 |
61-1275-06 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度18公厘) DZ-SOCLS4120-10 | DZ-SOCLS4120-10 | 12.0mm | 18.0mm | 1piece | JPY: 37,275 | USD: 233.66 |
-
|
|
 |
61-1273-77 | SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度26公厘) DZ-SOCS4120-S10 | DZ-SOCS4120-S10 | 12.0mm | 26.0mm | 1piece | JPY: 18,300 | USD: 114.71 |
|
|
 |
61-1273-78 | SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度26公厘) DZ-SOCS4120 | DZ-SOCS4120 | 12.0mm | 26.0mm | 1piece | JPY: 18,300 | USD: 114.71 |
|
|
 |
61-1274-39 | SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度26公厘) DZ-SOCS4120-05 | DZ-SOCS4120-05 | 12.0mm | 26.0mm | 1piece | JPY: 25,620 | USD: 160.60 |
|
|
 |
61-1274-40 | SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度26公厘) DZ-SOCS4120-10 | DZ-SOCS4120-10 | 12.0mm | 26.0mm | 1piece | JPY: 25,620 | USD: 160.60 |
|
|
 |
61-1274-41 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度26公厘) DZ-SOCS4120-15 | DZ-SOCS4120-15 | 12.0mm | 26.0mm | 1piece | JPY: 23,725 | USD: 148.72 |
-
|
|
 |
61-1274-42 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度26公厘) DZ-SOCS4120-20 | DZ-SOCS4120-20 | 12.0mm | 26.0mm | 1piece | JPY: 23,725 | USD: 148.72 |
-
|
|
 |
61-1274-43 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度26公厘) DZ-SOCS4120-30 | DZ-SOCS4120-30 | 12.0mm | 26.0mm | 1piece | JPY: 23,725 | USD: 148.72 |
-
|
|
 |
61-1274-55 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度26公厘) DZ-SOCS4120S10-05 | DZ-SOCS4120S10-05 | 12.0mm | 26.0mm | 1piece | JPY: 23,725 | USD: 148.72 |
-
|
|
 |
61-1274-56 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度26公厘) DZ-SOCS4120S10-10 | DZ-SOCS4120S10-10 | 12.0mm | 26.0mm | 1piece | JPY: 23,725 | USD: 148.72 |
-
|
|
 |
61-1274-57 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度26公厘) DZ-SOCS4120S10-20 | DZ-SOCS4120S10-20 | 12.0mm | 26.0mm | 1piece | JPY: 23,725 | USD: 148.72 |
-
|
|
 |
61-1274-02 | SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度38公厘) DZ-SOCM4120 | DZ-SOCM4120 | 12.0mm | 38.0mm | 1piece | JPY: 21,960 | USD: 137.65 |
|
|
 |
61-1274-14 | SuperOne-CutEndmill (4刀锋，Φ12 x刀锋长度55公厘) DZ-SOCL4120 | DZ-SOCL4120 | 12.0mm | 55.0mm | 1piece | JPY: 33,940 | USD: 212.75 |
|
|
 |
61-1274-88 | SuperOne-CutEndmill (4刀锋，Φ13 x刀锋长度18公厘) DZ-SOCLS4130 | DZ-SOCLS4130 | 13.0mm | 18.0mm | 1piece | JPY: 26,290 | USD: 164.80 |
|
|
 |
61-1273-79 | SuperOne-CutEndmill (4刀锋，Φ13 x刀锋长度26公厘) DZ-SOCS4130 | DZ-SOCS4130 | 13.0mm | 26.0mm | 1piece | JPY: 20,210 | USD: 126.69 |
|
|
 |
61-1274-03 | SuperOne-CutEndmill (4刀锋，Φ13 x刀锋长度38公厘) DZ-SOCM4130 | DZ-SOCM4130 | 13.0mm | 38.0mm | 1piece | JPY: 24,290 | USD: 152.26 |
|
|
 |
61-1274-89 | SuperOne-CutEndmill (4刀锋，Φ14 x刀锋长度18公厘) DZ-SOCLS4140 | DZ-SOCLS4140 | 14.0mm | 18.0mm | 1piece | JPY: 35,600 | USD: 223.16 |
|
|
 |
61-1273-80 | SuperOne-CutEndmill (4刀锋，Φ14 x刀锋长度26公厘) DZ-SOCS4140-S12 | DZ-SOCS4140-S12 | 14.0mm | 26.0mm | 1piece | JPY: 27,200 | USD: 170.50 |
|
|
 |
61-1273-81 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ14 x刀锋长度26公厘) DZ-SOCS4140 | DZ-SOCS4140 | 14.0mm | 26.0mm | 1piece | JPY: 25,188 | USD: 157.89 |
-
|
|
 |
61-1274-58 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ14 x刀锋长度26公厘) DZ-SOCS4140S12-05 | DZ-SOCS4140S12-05 | 14.0mm | 26.0mm | 1piece | JPY: 35,275 | USD: 221.12 |
-
|
|
 |
61-1274-59 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ14 x刀锋长度26公厘) DZ-SOCS4140S12-10 | DZ-SOCS4140S12-10 | 14.0mm | 26.0mm | 1piece | JPY: 35,275 | USD: 221.12 |
-
|
|
 |
61-1274-60 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ14 x刀锋长度26公厘) DZ-SOCS4140S12-20 | DZ-SOCS4140S12-20 | 14.0mm | 26.0mm | 1piece | JPY: 35,275 | USD: 221.12 |
-
|
|
 |
61-1274-04 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ14 x刀锋长度38公厘) DZ-SOCM4140 | DZ-SOCM4140 | 14.0mm | 38.0mm | 1piece | JPY: 30,188 | USD: 189.23 |
-
|
|
 |
61-1274-90 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ15 x刀锋长度22公厘) DZ-SOCLS4150 | DZ-SOCLS4150 | 15.0mm | 22.0mm | 1piece | JPY: 35,275 | USD: 221.12 |
-
|
|
 |
61-1273-82 | SuperOne-CutEndmill (4刀锋，Φ15 x刀锋长度26公厘) DZ-SOCS4150 | DZ-SOCS4150 | 15.0mm | 26.0mm | 1piece | JPY: 29,280 | USD: 183.54 |
|
|
 |
61-1274-05 | SuperOne-CutEndmill (4刀锋，Φ15 x刀锋长度38公厘) DZ-SOCM4150 | DZ-SOCM4150 | 15.0mm | 38.0mm | 1piece | JPY: 35,100 | USD: 220.02 |
|
|
 |
61-1274-91 | SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度24公厘) DZ-SOCLS4160 | DZ-SOCLS4160 | 16.0mm | 24.0mm | 1piece | JPY: 45,410 | USD: 284.65 |
|
|
 |
61-1275-07 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度24公厘) DZ-SOCLS4160-10 | DZ-SOCLS4160-10 | 16.0mm | 24.0mm | 1piece | JPY: 75,075 | USD: 470.60 |
-
|
|
 |
61-1275-08 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度24公厘) DZ-SOCLS4160-20 | DZ-SOCLS4160-20 | 16.0mm | 24.0mm | 1piece | JPY: 75,075 | USD: 470.60 |
-
|
|
 |
61-1273-84 | SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度32公厘) DZ-SOCS4160 | DZ-SOCS4160 | 16.0mm | 32.0mm | 1piece | JPY: 34,850 | USD: 218.45 |
|
|
 |
61-1274-44 | SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度32公厘) DZ-SOCS4160-10 | DZ-SOCS4160-10 | 16.0mm | 32.0mm |
|
1piece | JPY: 48,820 | USD: 306.02 |
|
 |
61-1273-83 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度32公厘) DZ-SOCS4160-S14 | DZ-SOCS4160-S14 | 16.0mm | 32.0mm | 1piece | JPY: 32,275 | USD: 202.31 |
-
|
|
 |
61-1274-45 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度32公厘) DZ-SOCS4160-15 | DZ-SOCS4160-15 | 16.0mm | 32.0mm | 1piece | JPY: 45,200 | USD: 283.33 |
-
|
|
 |
61-1274-46 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度32公厘) DZ-SOCS4160-20 | DZ-SOCS4160-20 | 16.0mm | 32.0mm | 1piece | JPY: 45,200 | USD: 283.33 |
-
|
|
 |
61-1274-47 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度32公厘) DZ-SOCS4160-30 | DZ-SOCS4160-30 | 16.0mm | 32.0mm | 1piece | JPY: 45,200 | USD: 283.33 |
-
|
|
 |
61-1274-61 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度32公厘) DZ-SOCS4160S14-05 | DZ-SOCS4160S14-05 | 16.0mm | 32.0mm | 1piece | JPY: 45,200 | USD: 283.33 |
-
|
|
 |
61-1274-62 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度32公厘) DZ-SOCS4160S14-10 | DZ-SOCS4160S14-10 | 16.0mm | 32.0mm | 1piece | JPY: 45,200 | USD: 283.33 |
-
|
|
 |
61-1274-63 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度32公厘) DZ-SOCS4160S14-20 | DZ-SOCS4160S14-20 | 16.0mm | 32.0mm | 1piece | JPY: 45,200 | USD: 283.33 |
-
|
|
 |
61-1274-06 | SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度48公厘) DZ-SOCM4160 | DZ-SOCM4160 | 16.0mm | 48.0mm | 1piece | JPY: 41,840 | USD: 262.27 |
|
|
 |
61-1274-15 | SuperOne-CutEndmill (4刀锋，Φ16 x刀锋长度65公厘) DZ-SOCL4160 | DZ-SOCL4160 | 16.0mm | 65.0mm | 1piece | JPY: 62,790 | USD: 393.59 |
|
|
 |
61-1274-92 | SuperOne-CutEndmill (4刀锋，Φ17 x刀锋长度24公厘) DZ-SOCLS4170 | DZ-SOCLS4170 | 17.0mm | 24.0mm | 1piece | JPY: 46,660 | USD: 292.48 |
|
|
 |
61-1273-85 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ17 x刀锋长度32公厘) DZ-SOCS4170 | DZ-SOCS4170 | 17.0mm | 32.0mm | 1piece | JPY: 40,125 | USD: 251.52 |
-
|
|
 |
61-1274-07 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ17 x刀锋长度48公厘) DZ-SOCM4170 | DZ-SOCM4170 | 17.0mm | 48.0mm | 1piece | JPY: 48,213 | USD: 302.22 |
-
|
|
 |
61-1274-93 | SuperOne-CutEndmill (4刀锋，Φ18 x刀锋长度27公厘) DZ-SOCLS4180 | DZ-SOCLS4180 | 18.0mm | 27.0mm | 1piece | JPY: 67,620 | USD: 423.87 |
|
|
 |
61-1273-86 | SuperOne-CutEndmill (4刀锋，Φ18 x刀锋长度32公厘) DZ-SOCS4180-S16 | DZ-SOCS4180-S16 | 18.0mm | 32.0mm | 1piece | JPY: 45,080 | USD: 282.58 |
|
|
 |
61-1273-87 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ18 x刀锋长度32公厘) DZ-SOCS4180 | DZ-SOCS4180 | 18.0mm | 32.0mm | 1piece | JPY: 41,738 | USD: 261.63 |
-
|
|
 |
61-1274-64 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ18 x刀锋长度32公厘) DZ-SOCS4180S16-05 | DZ-SOCS4180S16-05 | 18.0mm | 32.0mm | 1piece | JPY: 58,525 | USD: 366.86 |
-
|
|
 |
61-1274-65 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ18 x刀锋长度32公厘) DZ-SOCS4180S16-10 | DZ-SOCS4180S16-10 | 18.0mm | 32.0mm | 1piece | JPY: 58,525 | USD: 366.86 |
-
|
|
 |
61-1274-66 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ18 x刀锋长度32公厘) DZ-SOCS4180S16-20 | DZ-SOCS4180S16-20 | 18.0mm | 32.0mm | 1piece | JPY: 58,525 | USD: 366.86 |
-
|
|
 |
61-1274-08 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ18 x刀锋长度48公厘) DZ-SOCM4180 | DZ-SOCM4180 | 18.0mm | 48.0mm | 1piece | JPY: 50,138 | USD: 314.29 |
-
|
|
 |
61-1274-94 | SuperOne-CutEndmill (4刀锋，Φ19 x刀锋长度30公厘) DZ-SOCLS4190 | DZ-SOCLS4190 | 19.0mm | 30.0mm | 1piece | JPY: 67,620 | USD: 423.87 |
|
|
 |
61-1273-88 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ19 x刀锋长度32公厘) DZ-SOCS4190 | DZ-SOCS4190 | 19.0mm | 32.0mm | 1piece | JPY: 41,738 | USD: 261.63 |
-
|
|
 |
61-1274-09 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ19 x刀锋长度48公厘) DZ-SOCM4190 | DZ-SOCM4190 | 19.0mm | 48.0mm | 1piece | JPY: 50,138 | USD: 314.29 |
-
|
|
 |
61-1274-95 | SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度30公厘) DZ-SOCLS4200-S18 | DZ-SOCLS4200-S18 | 20.0mm | 30.0mm | 1piece | JPY: 70,770 | USD: 443.62 |
|
|
 |
61-1274-96 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度30公厘) DZ-SOCLS4200 | DZ-SOCLS4200 | 20.0mm | 30.0mm | 1piece | JPY: 68,538 | USD: 429.63 |
-
|
|
 |
61-1273-90 | SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度38公厘) DZ-SOCS4200 | DZ-SOCS4200 | 20.0mm | 38.0mm | 1piece | JPY: 49,320 | USD: 309.16 |
|
|
 |
61-1274-48 | SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度38公厘) DZ-SOCS4200-10 | DZ-SOCS4200-10 | 20.0mm | 38.0mm | 1piece | JPY: 68,950 | USD: 432.21 |
|
|
 |
61-1273-89 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度38公厘) DZ-SOCS4200-S18 | DZ-SOCS4200-S18 | 20.0mm | 38.0mm | 1piece | JPY: 45,663 | USD: 286.24 |
-
|
|
 |
61-1274-49 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度38公厘) DZ-SOCS4200-15 | DZ-SOCS4200-15 | 20.0mm | 38.0mm | 1piece | JPY: 63,838 | USD: 400.16 |
-
|
|
 |
61-1274-50 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度38公厘) DZ-SOCS4200-20 | DZ-SOCS4200-20 | 20.0mm | 38.0mm | 1piece | JPY: 63,838 | USD: 400.16 |
-
|
|
 |
61-1274-51 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度38公厘) DZ-SOCS4200-30 | DZ-SOCS4200-30 | 20.0mm | 38.0mm | 1piece | JPY: 63,838 | USD: 400.16 |
-
|
|
 |
61-1274-67 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度38公厘) DZ-SOCS4200S18-10 | DZ-SOCS4200S18-10 | 20.0mm | 38.0mm | 1piece | JPY: 63,838 | USD: 400.16 |
-
|
|
 |
61-1274-68 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度38公厘) DZ-SOCS4200S18-20 | DZ-SOCS4200S18-20 | 20.0mm | 38.0mm | 1piece | JPY: 63,838 | USD: 400.16 |
-
|
|
 |
61-1274-69 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度38公厘) DZ-SOCS4200S18-30 | DZ-SOCS4200S18-30 | 20.0mm | 38.0mm | 1piece | JPY: 63,838 | USD: 400.16 |
-
|
|
 |
61-1274-10 | SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度56公厘) DZ-SOCM4200 | DZ-SOCM4200 | 20.0mm | 56.0mm | 1piece | JPY: 59,220 | USD: 371.22 |
|
|
 |
61-1274-16 | SuperOne-CutEndmill (4刀锋，Φ20 x刀锋长度75公厘) DZ-SOCL4200 | DZ-SOCL4200 | 20.0mm | 75.0mm | 1piece | JPY: 103,130 | USD: 646.46 |
|
|
 |
61-1274-97 | SuperOne-CutEndmill (4刀锋，Φ22 x刀锋长度35公厘) DZ-SOCLS4220-S20 | DZ-SOCLS4220-S20 | 22.0mm | 35.0mm | 1piece | JPY: 75,930 | USD: 475.96 |
|
|
 |
61-1273-91 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ22 x刀锋长度40公厘) DZ-SOCS4220-S20 | DZ-SOCS4220-S20 | 22.0mm | 40.0mm | 1piece | JPY: 61,688 | USD: 386.69 |
-
|
|
 |
61-1274-70 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ22 x刀锋长度40公厘) DZ-SOCS4220S20-10 | DZ-SOCS4220S20-10 | 22.0mm | 40.0mm | 1piece | JPY: 83,163 | USD: 521.30 |
-
|
|
 |
61-1274-71 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ22 x刀锋长度40公厘) DZ-SOCS4220S20-20 | DZ-SOCS4220S20-20 | 22.0mm | 40.0mm | 1piece | JPY: 83,163 | USD: 521.30 |
-
|
|
 |
61-1274-72 | ［已停用］SuperOne-CutEndmill (4刀锋，Φ22 x刀锋长度40公厘) DZ-SOCS4220S20-30 | DZ-SOCS4220S20-30 | 22.0mm | 40.0mm | 1piece | JPY: 83,163 | USD: 521.30 |
-
|
