61-1271-21 ［已停用］碳化物Miracle Endmill (Φ15.0 x刀锋长度40 mm) VC4JCD1500
功能
- You can use a wide range of materials from raw materials to high hardness steel in one piece.
- The use of miracle coating significantly improves the life of conventional products.
- Work Material: Tool Steel, Alloy Steel, High Hardness Steel (~55HRC), Austenitic Stainless Steel, Heat Resistant Alloy.
规格
- 叶片直径 (mm) :15.0
- 刀锋长度 (mm) :40
- 长度 (mm) :110
- 树干直径 (mm) :16
- 表面处理:奇迹涂层 (VC)
- 螺旋角30°
- 中心工作表:使用
- 极细颗粒硬质合金 (UWC)
- 应用:工件:碳素工具钢、合金钢 (40 HRC) 、硬化钢 (55 HRC) 、奥氏体不锈钢、耐热合金。
- 原籍国:日本
- 制造商型号:VC4JCD1500
- 代码编号:110-7780
封装大小：31×124×32 mm 300 g [关于封装大小]
| 第号命令。 | 61-1271-21 | |
|---|---|---|
| 型号号。 | VC4JCD1500 | |
| JAN代码 | 4994196375386 | |
| 标准价格 |
JPY: 52,325
USD: 328.00
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 数量 | 1piece | |
|
||
| 日本股票 | - | |
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Blade diameter |
Blade length |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1270-66 | ［已停用］Miracle Carbide Endmill (Φ2.0 x刀锋长度6公厘) VC4MCD0200 | VC4MCD0200 | 2.0mm | 6.0mm | 1piece | JPY: 8,613 | USD: 53.99 |
-
|
|
 |
61-1270-67 | ［已停用］Miracle Carbide Endmill (Φ2.5 x刀锋长度8公厘) VC4MCD0250 | VC4MCD0250 | 2.5mm | 8.0mm | 1piece | JPY: 8,775 | USD: 55.01 |
-
|
|
 |
61-1270-68 | ［已停用］Miracle Carbide Endmill (Φ3.0 x刀锋长度8公厘) VC4MCD0300 | VC4MCD0300 | 3.0mm | 8.0mm | 1piece | JPY: 8,775 | USD: 55.01 |
-
|
|
 |
61-1270-99 | ［已停用］碳化物Miracle Endmill (Φ3.0 x刀锋长度12 mm) VC4JCD0300 | VC4JCD0300 | 3.0mm | 12.0mm | 1piece | JPY: 11,050 | USD: 69.27 |
-
|
|
 |
61-1270-69 | ［已停用］Miracle Carbide Endmill (Φ3.5 x刀锋长度10 mm) VC4MCD0350 | VC4MCD0350 | 3.5mm | 10.0mm | 1piece | JPY: 9,588 | USD: 60.10 |
-
|
|
 |
61-1271-01 | ［已停用］碳化物Miracle Endmill (Φ3.5 x刀锋长度15 mm) VC4JCD0350 | VC4JCD0350 | 3.5mm | 15.0mm | 1piece | JPY: 12,106 | USD: 75.89 |
-
|
|
 |
61-1270-70 | ［已停用］Miracle Carbide Endmill (Φ4.0 x刀锋长度11 mm) VC4MCD0400 | VC4MCD0400 | 4.0mm | 11.0mm | 1piece | JPY: 9,588 | USD: 60.10 |
-
|
|
 |
61-1271-02 | ［已停用］碳化物Miracle Endmill (Φ4.0 x刀锋长度15 mm) VC4JCD0400 | VC4JCD0400 | 4.0mm | 15.0mm | 1piece | JPY: 12,106 | USD: 75.89 |
-
|
|
 |
61-1270-71 | ［已停用］Miracle Carbide Endmill (Φ4.5 x刀锋长度11 mm) VC4MCD0450 | VC4MCD0450 | 4.5mm | 11.0mm | 1piece | JPY: 10,156 | USD: 63.66 |
-
|
|
 |
61-1271-03 | ［已停用］碳化物Miracle Endmill (Φ4.5 x刀锋长度15 mm) VC4JCD0450 | VC4JCD0450 | 4.5mm | 15.0mm | 1piece | JPY: 12,838 | USD: 80.47 |
-
|
|
 |
61-1271-04 | ［已停用］碳化物Miracle Endmill (Φ5.0 x刀锋长度20 mm) VC4JCD0500 | VC4JCD0500 | 5.0mm | 20.0mm | 1piece | JPY: 12,838 | USD: 80.47 |
-
|
|
 |
61-1270-73 | ［已停用］Miracle Carbide Endmill (Φ5.5 x刀锋长度13 mm) VC4MCD0550 | VC4MCD0550 | 5.5mm | 13.0mm | 1piece | JPY: 11,050 | USD: 69.27 |
-
|
|
 |
61-1271-05 | ［已停用］碳化物Miracle Endmill (Φ5.5 x刀锋长度20 mm) VC4JCD0550 | VC4JCD0550 | 5.5mm | 20.0mm | 1piece | JPY: 14,056 | USD: 88.11 |
-
|
|
 |
61-1270-74 | ［已停用］Miracle Carbide Endmill (Φ6.0 x刀锋长度13 mm) VC4MCD0600 | VC4MCD0600 | 6.0mm | 13.0mm | 1piece | JPY: 11,050 | USD: 69.27 |
-
|
|
 |
61-1271-06 | ［已停用］碳化物Miracle Endmill (Φ6.0 x刀锋长度20 mm) VC4JCD0600 | VC4JCD0600 | 6.0mm | 20.0mm | 1piece | JPY: 14,056 | USD: 88.11 |
-
|
|
 |
61-1270-75 | ［已停用］Miracle Carbide Endmill (Φ6.5 x刀锋长度16 mm) VC4MCD0650 | VC4MCD0650 | 6.5mm | 16.0mm | 1piece | JPY: 13,081 | USD: 82.00 |
-
|
|
 |
61-1271-07 | ［已停用］碳化物Miracle Endmill (Φ6.5 x刀锋长度25 mm) VC4JCD0650 | VC4JCD0650 | 6.5mm | 25.0mm | 1piece | JPY: 17,306 | USD: 108.48 |
-
|
|
 |
61-1270-76 | ［已停用］Miracle Carbide Endmill (Φ7.0 x刀锋长度16 mm) VC4MCD0700 | VC4MCD0700 | 7.0mm | 16.0mm | 1piece | JPY: 13,081 | USD: 82.00 |
-
|
|
 |
61-1271-08 | ［已停用］碳化物Miracle Endmill (Φ7.0 x刀锋长度25 mm) VC4JCD0700 | VC4JCD0700 | 7.0mm | 25.0mm | 1piece | JPY: 17,306 | USD: 108.48 |
-
|
|
 |
61-1270-77 | ［已停用］Miracle Carbide Endmill (Φ7.5 x刀锋长度16 mm) VC4MCD0750 | VC4MCD0750 | 7.5mm | 16.0mm | 1piece | JPY: 14,381 | USD: 90.15 |
-
|
|
 |
61-1271-09 | ［已停用］碳化物Miracle Endmill (Φ7.5 x刀锋长度25 mm) VC4JCD0750 | VC4JCD0750 | 7.5mm | 25.0mm | 1piece | JPY: 19,013 | USD: 119.18 |
-
|
|
 |
61-1271-10 | ［已停用］碳化物Miracle Endmill (Φ8.0 x刀锋长度25 mm) VC4JCD0800 | VC4JCD0800 | 8.0mm | 25.0mm | 1piece | JPY: 19,013 | USD: 119.18 |
-
|
|
 |
61-1270-79 | ［已停用］Miracle Carbide Endmill (Φ8.5 x刀锋长度19 mm) VC4MCD0850 | VC4MCD0850 | 8.5mm | 19.0mm | 1piece | JPY: 16,656 | USD: 104.41 |
-
|
|
 |
61-1271-11 | ［已停用］碳化物Miracle Endmill (Φ8.5 x刀锋长度25 mm) VC4JCD0850 | VC4JCD0850 | 8.5mm | 25.0mm | 1piece | JPY: 21,369 | USD: 133.95 |
-
|
|
 |
61-1270-80 | ［已停用］Miracle Carbide Endmill (Φ9.0 x刀锋长度19 mm) VC4MCD0900 | VC4MCD0900 | 9.0mm | 19.0mm | 1piece | JPY: 16,656 | USD: 104.41 |
-
|
|
 |
61-1271-12 | ［已停用］碳化物Miracle Endmill (Φ9.0 x刀锋长度25 mm) VC4JCD0900 | VC4JCD0900 | 9.0mm | 25.0mm | 1piece | JPY: 21,369 | USD: 133.95 |
-
|
|
 |
61-1270-82 | ［已停用］Miracle Carbide Endmill (Φ10.0 x刀锋长度22 mm) VC4MCD1000 | VC4MCD1000 | 10.0mm | 22.0mm | 1piece | JPY: 19,256 | USD: 120.71 |
-
|
|
 |
61-1271-14 | ［已停用］碳化物Miracle Endmill (Φ10.0 x刀锋长度30 mm) VC4JCD1000 | VC4JCD1000 | 10.0mm | 30.0mm | 1piece | JPY: 24,456 | USD: 153.30 |
-
|
|
 |
61-1270-83 | ［已停用］Miracle Carbide Endmill (Φ10.5 x刀锋长度22 mm) VC4MCD1050 | VC4MCD1050 | 10.5mm | 22.0mm | 1piece | JPY: 22,100 | USD: 138.53 |
-
|
|
 |
61-1270-84 | ［已停用］Miracle Carbide Endmill (Φ11.0 x刀锋长度22 mm) VC4MCD1100 | VC4MCD1100 | 11.0mm | 22.0mm | 1piece | JPY: 22,100 | USD: 138.53 |
-
|
|
 |
61-1271-16 | ［已停用］碳化物Miracle Endmill (Φ11.0 x刀锋长度30 mm) VC4JCD1100 | VC4JCD1100 | 11.0mm | 30.0mm | 1piece | JPY: 27,138 | USD: 170.11 |
-
|
|
 |
61-1270-86 | ［已停用］Miracle Carbide Endmill (Φ12.0 x刀锋长度26 mm) VC4MCD1200 | VC4MCD1200 | 12.0mm | 26.0mm | 1piece | JPY: 24,213 | USD: 151.78 |
-
|
|
 |
61-1271-18 | ［已停用］碳化物Miracle Endmill (Φ12.0 x刀锋长度30 mm) VC4JCD1200 | VC4JCD1200 | 12.0mm | 30.0mm | 1piece | JPY: 29,819 | USD: 186.92 |
-
|
|
 |
61-1270-87 | ［已停用］Miracle Carbide Endmill (Φ12.5 x刀锋长度26 mm) VC4MCD1250 | VC4MCD1250 | 12.5mm | 26.0mm | 1piece | JPY: 29,331 | USD: 183.86 |
-
|
|
 |
61-1270-88 | ［已停用］Miracle Carbide Endmill (Φ13.0 x刀锋长度26 mm) VC4MCD1300 | VC4MCD1300 | 13.0mm | 26.0mm | 1piece | JPY: 29,331 | USD: 183.86 |
-
|
|
 |
61-1271-19 | ［已停用］碳化物Miracle Endmill (Φ13.0 x刀锋长度35 mm) VC4JCD1300 | VC4JCD1300 | 13.0mm | 35.0mm | 1piece | JPY: 37,619 | USD: 235.81 |
-
|
|
 |
61-1270-89 | ［已停用］Miracle Carbide Endmill (Φ14.0 x刀锋长度26 mm) VC4MCD1400 | VC4MCD1400 | 14.0mm | 26.0mm | 1piece | JPY: 32,663 | USD: 204.75 |
-
|
|
 |
61-1271-20 | ［已停用］碳化物Miracle Endmill (Φ14.0 x刀锋长度40 mm) VC4JCD1400 | VC4JCD1400 | 14.0mm | 40.0mm | 1piece | JPY: 41,925 | USD: 262.80 |
-
|
|
 |
61-1270-90 | ［已停用］Miracle Carbide Endmill (Φ15.0 x刀锋长度30 mm) VC4MCD1500 | VC4MCD1500 | 15.0mm | 30.0mm | 1piece | JPY: 41,194 | USD: 258.22 |
-
|
|
 |
61-1271-21 | ［已停用］碳化物Miracle Endmill (Φ15.0 x刀锋长度40 mm) VC4JCD1500 | VC4JCD1500 | 15.0mm | 40.0mm | 1piece | JPY: 52,325 | USD: 328.00 |
-
|
|
 |
61-1270-91 | ［已停用］Miracle Carbide Endmill (Φ16.0 x刀锋长度32 mm) VC4MCD1600 | VC4MCD1600 | 16.0mm | 32.0mm | 1piece | JPY: 49,238 | USD: 308.64 |
-
|
|
 |
61-1271-22 | ［已停用］碳化物Miracle Endmill (Φ16.0 x刀锋长度50 mm) VC4JCD1600 | VC4JCD1600 | 16.0mm | 50.0mm | 1piece | JPY: 64,838 | USD: 406.43 |
-
|
|
 |
61-1270-92 | ［已停用］Miracle Carbide Endmill (Φ17.0 x刀锋长度32 mm) VC4MCD1700 | VC4MCD1700 | 17.0mm | 32.0mm | 1piece | JPY: 56,388 | USD: 353.46 |
-
|
|
 |
61-1271-23 | ［已停用］碳化物Miracle Endmill (Φ17.0 x刀锋长度50 mm) VC4JCD1700 | VC4JCD1700 | 17.0mm | 50.0mm | 1piece | JPY: 70,525 | USD: 442.08 |
-
|
|
 |
61-1270-93 | ［已停用］Miracle Carbide Endmill (Φ18.0 x刀锋长度32 mm) VC4MCD1800 | VC4MCD1800 | 18.0mm | 32.0mm | 1piece | JPY: 65,244 | USD: 408.98 |
-
|
|
 |
61-1271-24 | ［已停用］碳化物Miracle Endmill (Φ18.0 x刀锋长度50 mm) VC4JCD1800 | VC4JCD1800 | 18.0mm | 50.0mm | 1piece | JPY: 82,063 | USD: 514.41 |
-
|
|
 |
61-1270-94 | ［已停用］Miracle Carbide Endmill (Φ19.0 x刀锋长度32 mm) VC4MCD1900 | VC4MCD1900 | 19.0mm | 32.0mm | 1piece | JPY: 71,825 | USD: 450.23 |
-
|
|
 |
61-1270-95 | ［已停用］Miracle Carbide Endmill (Φ20.0 x刀锋长度38 mm) VC4MCD2000 | VC4MCD2000 | 20.0mm | 38.0mm | 1piece | JPY: 74,506 | USD: 467.03 |
-
|
|
 |
61-1271-26 | ［已停用］碳化物Miracle Endmill (Φ20.0 x刀锋长度55 mm) VC4JCD2000 | VC4JCD2000 | 20.0mm | 55.0mm | 1piece | JPY: 92,625 | USD: 580.61 |
-
|
|
 |
61-1270-96 | ［已停用］Miracle Carbide Endmill (Φ22.0 x刀锋长度38 mm) VC4MCD2200 | VC4MCD2200 | 22.0mm | 38.0mm | 1piece | JPY: 85,313 | USD: 534.78 |
-
|
|
 |
61-1271-27 | ［已停用］碳化物Miracle Endmill (Φ22.0 x刀锋长度65 mm) VC4JCD2200 | VC4JCD2200 | 22.0mm | 65.0mm | 1piece | JPY: 107,250 | USD: 672.29 |
-
|
|
 |
61-1270-97 | ［已停用］Miracle Carbide Endmill (Φ24.0 x刀锋长度45 mm) VC4MCD2400 | VC4MCD2400 | 24.0mm | 45.0mm | 1piece | JPY: 108,875 | USD: 682.47 |
-
|
|
 |
61-1270-98 | ［已停用］Miracle Carbide Endmill (Φ25.0 x刀锋长度45 mm) VC4MCD2500 | VC4MCD2500 | 25.0mm | 45.0mm | 1piece | JPY: 123,500 | USD: 774.15 |
-
|
|
 |
61-1271-29 | ［已停用］碳化物Miracle Endmill (Φ25.0 x刀锋长度75 mm) VC4JCD2500 | VC4JCD2500 | 25.0mm | 75.0mm | 1piece | JPY: 154,375 | USD: 967.69 |
-
|