61-1259-21 ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ7.0 x刀锋长度:40公厘) C2LSD0700
功能
- It uses ultra-fine particle cemented carbide, which is capable of finishing non-ferrous materials such as tempered steel, copper alloy and light alloy.
- Sharp corner is adopted and the cutting edge is sharp, so it is effective for aluminum non-ferrous processing.
- Work Material: General Steel, Prehardened Steel, Cast Iron, Aluminum Alloy, Titanium Alloy, Heat Resistant Alloy, Copper Alloy.
规格
- 叶片直径 (mm) :7.0
- 刀锋长度 (mm) :40
- 长度 (mm) :90
- 树干直径 (mm) :8
- 非涂层
- 螺旋角30°
- pin Kado类型
- 中心工作表:使用
- 极细颗粒硬质合金 (UWC)
- 应用:工件:普通钢预硬化钢、铸造、铝合金、钛合金、耐热合金、铜合金。
- 原籍国:日本
- 制造商型号:C2LSD0700
- 代码号:107-8143
| 第号命令。 | 61-1259-21 | |
|---|---|---|
| 型号号。 | C2LSD0700 | |
| JAN代码 | 4994196410117 | |
| 标准价格 |
JPY: 17,956
USD: 112.56
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| 数量 | 1piece | |
|
||
| 日本股票 | - | |
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Blade diameter |
Blade length |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1259-10 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ1.5 x刀锋长度:6公厘) C2LSD0150 | C2LSD0150 | 1.5mm | 6.0mm | 1piece | JPY: 7,670 | USD: 48.08 |
-
|
|
 |
61-1259-11 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ2.0 x刀锋长度:9公厘) C2LSD0200 | C2LSD0200 | 2.0mm | 9.0mm | 1piece | JPY: 7,670 | USD: 48.08 |
-
|
|
 |
61-1259-12 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ2.5 x刀锋长度:12公厘) C2LSD0250 | C2LSD0250 | 2.5mm | 12.0mm | 1piece | JPY: 7,670 | USD: 48.08 |
-
|
|
 |
61-1259-13 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ3.0 x刀锋长度:20公厘) C2LSD0300 | C2LSD0300 | 3.0mm | 20.0mm | 1piece | JPY: 10,156 | USD: 63.66 |
-
|
|
 |
61-1259-14 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ3.5 x刀锋长度:22公厘) C2LSD0350 | C2LSD0350 | 3.5mm | 22.0mm | 1piece | JPY: 11,213 | USD: 70.29 |
-
|
|
 |
61-1259-15 | ［已停用］硬质合金Endmill (长，2片刀锋，非涂层，C2LS,Φ4.0 x刀锋长度:25公厘) C2LSD0400 | C2LSD0400 | 4.0mm | 25.0mm | 1piece | JPY: 11,213 | USD: 70.29 |
-
|
|
 |
61-1259-17 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ5.0 x刀锋长度:30公厘) C2LSD0500 | C2LSD0500 | 5.0mm | 30.0mm | 1piece | JPY: 12,513 | USD: 78.44 |
-
|
|
 |
61-1259-18 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ5.5 x刀锋长度:30公厘) C2LSD0550 | C2LSD0550 | 5.5mm | 30.0mm | 1piece | JPY: 13,731 | USD: 86.07 |
-
|
|
 |
61-1259-19 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ6.0 x刀锋长度:30公厘) C2LSD0600 | C2LSD0600 | 6.0mm | 30.0mm | 1piece | JPY: 13,731 | USD: 86.07 |
-
|
|
 |
61-1259-20 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ6.5 x刀锋长度:30公厘) C2LSD0650 | C2LSD0650 | 6.5mm | 30.0mm | 1piece | JPY: 17,956 | USD: 112.56 |
-
|
|
 |
61-1259-21 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ7.0 x刀锋长度:40公厘) C2LSD0700 | C2LSD0700 | 7.0mm | 40.0mm | 1piece | JPY: 17,956 | USD: 112.56 |
-
|
|
 |
61-1259-23 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ8.0 x刀锋长度:40公厘) C2LSD0800 | C2LSD0800 | 8.0mm | 40.0mm | 1piece | JPY: 19,988 | USD: 125.29 |
-
|
|
 |
61-1259-24 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ8.5 x刀锋长度:40公厘) C2LSD0850 | C2LSD0850 | 8.5mm | 40.0mm | 1piece | JPY: 24,619 | USD: 154.32 |
-
|
|
 |
61-1259-25 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ9.0 x刀锋长度:40公厘) C2LSD0900 | C2LSD0900 | 9.0mm | 40.0mm | 1piece | JPY: 24,619 | USD: 154.32 |
-
|
|
 |
61-1259-27 | ［已停用］硬质合金Endmill (长，2片刀锋，非涂层，C2LS,Φ10.0 x刀锋长度:50公厘) C2LSD1000 | C2LSD1000 | 10.0mm | 50.0mm | 1piece | JPY: 25,513 | USD: 159.93 |
-
|
|
 |
61-1259-29 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ11.0 x刀锋长度:50公厘) C2LSD1100 | C2LSD1100 | 11.0mm | 50.0mm | 1piece | JPY: 28,763 | USD: 180.30 |
-
|
|
 |
61-1259-33 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ13.0 x刀锋长度:50公厘) C2LSD1300 | C2LSD1300 | 13.0mm | 50.0mm | 1piece | JPY: 35,750 | USD: 224.10 |
-
|
|
 |
61-1259-34 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ14.0 x刀锋长度:70公厘) C2LSD1400 | C2LSD1400 | 14.0mm | 70.0mm | 1piece | JPY: 49,075 | USD: 307.62 |
-
|
|
 |
61-1259-35 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ15.0 x刀锋长度:70公厘) C2LSD1500 | C2LSD1500 | 15.0mm | 70.0mm | 1piece | JPY: 50,700 | USD: 317.81 |
-
|
|
 |
61-1259-37 | ［已停用］硬质合金Endmill (长，2片刀锋，非涂层，C2LS,Φ17.0 x刀锋长度:70公厘) C2LSD1700 | C2LSD1700 | 17.0mm | 70.0mm | 1piece | JPY: 82,063 | USD: 514.41 |
-
|
|
 |
61-1259-38 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ18.0 x刀锋长度:70公厘) C2LSD1800 | C2LSD1800 | 18.0mm | 70.0mm | 1piece | JPY: 82,063 | USD: 514.41 |
-
|
|
 |
61-1259-40 | ［已停用］硬质合金Endmill (长，2片刀锋，无涂层，C2LS,Φ20.0 x刀锋长度:70公厘) C2LSD2000 | C2LSD2000 | 20.0mm | 70.0mm | 1piece | JPY: 86,938 | USD: 544.96 |
-
|