61-1257-21 MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ3.0 x刀锋长度:4.5公厘) MS2XLD0300N500
功能
- This series uses MS coating to realize cost performance.
- It can be used in a wide range of materials from raw materials to high-hardness steel and difficult-to-cut materials.
- Suitable for deep grooving in small diameter end mills.
- Work Material: Carbon Steel, Alloy Steel, High Hardness Steel (~55HRC), Stainless Steel (Austenitic), Heat Resistant Alloy.
规格
- 叶片直径 (mm) :3.0
- 刀锋长度 (mm) :4.5
- 长度 (mm) :100
- 树干直径 (mm) :6
- 头下长度 (mm) :50
- 表面处理:(阿弟，阿弟) N涂层 (MS)
- 螺丝的角度为30°
- 中心工作表:使用
- 极细颗粒硬质合金 (UWC)
- 用途:工件:碳钢、合金钢、硬化钢、不锈钢 (奥氏体) 、耐热合金。
- 原籍国:日本
- 制造商型号:MS2XLD0300N500
- 代码编号:672-0153
封装大小：12×120×12 mm 30 g [关于封装大小]
| 第号命令。 | 61-1257-21 | |
|---|---|---|
| 型号号。 | MS2XLD0300N500 | |
| JAN代码 | 4994196371838 | |
| 标准价格 |
JPY: 11,300
USD: 70.31
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| 数量 | 1piece | |
| 日本股票 |
|
|
| 供应商存货 |
|
|
产品种类 （尺寸不同·规格不同·选配品等）
| 产品图像 | 第号命令。 | 名称 | 型号号。 |
Blade diameter |
Blade length |
数量 | 标准价格 | 日本的有效价格 | 股票 [供应商存货] |
|
|---|---|---|---|---|---|---|---|---|---|---|
 |
61-1256-67 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.2 x刀锋长度:0.3公厘) MS2XLD0020N010 | MS2XLD0020N010 | 0.2mm | 0.3mm | 1piece | JPY: 10,700 | USD: 66.58 |
|
|
 |
61-1256-68 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.3 x刀锋长度:0.4公厘) MS2XLD0030N010 | MS2XLD0030N010 | 0.3mm | 0.4mm | 1piece | JPY: 8,490 | USD: 52.83 |
|
|
 |
61-1256-69 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.3 x刀锋长度:0.4公厘) MS2XLD0030N060 | MS2XLD0030N060 | 0.3mm | 0.4mm | 1piece | JPY: 12,600 | USD: 78.40 |
|
|
 |
61-1256-70 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.4 x刀锋长度:0.6公厘) MS2XLD0040N020 | MS2XLD0040N020 | 0.4mm | 0.6mm | 1piece | JPY: 6,260 | USD: 38.95 |
|
|
 |
61-1256-71 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.4 x刀锋长度:0.6公厘) MS2XLD0040N040 | MS2XLD0040N040 | 0.4mm | 0.6mm | 1piece | JPY: 6,260 | USD: 38.95 |
|
|
 |
61-1256-72 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.5 x刀锋长度:0.7公厘) MS2XLD0050N020 | MS2XLD0050N020 | 0.5mm | 0.7mm | 1piece | JPY: 4,480 | USD: 27.88 |
|
|
 |
61-1256-73 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.5 x刀锋长度:0.7公厘) MS2XLD0050N040 | MS2XLD0050N040 | 0.5mm | 0.7mm | 1piece | JPY: 4,480 | USD: 27.88 |
|
|
 |
61-1256-74 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.5 x刀锋长度:0.7公厘) MS2XLD0050N060 | MS2XLD0050N060 | 0.5mm | 0.7mm | 1piece | JPY: 4,480 | USD: 27.88 |
|
|
 |
61-1256-75 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.5 x刀锋长度:0.7公厘) MS2XLD0050N100 | MS2XLD0050N100 | 0.5mm | 0.7mm | 1piece | JPY: 7,470 | USD: 46.48 |
|
|
 |
61-1256-76 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.6 x刀锋长度:0.9mm) MS2XLD0060N020 | MS2XLD0060N020 | 0.6mm | 0.9mm | 1piece | JPY: 4,480 | USD: 27.88 |
|
|
 |
61-1256-77 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.6 x刀锋长度:0.9mm) MS2XLD0060N040 | MS2XLD0060N040 | 0.6mm | 0.9mm | 1piece | JPY: 4,480 | USD: 27.88 |
|
|
 |
61-1256-78 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.6 x刀锋长度:0.9mm) MS2XLD0060N060 | MS2XLD0060N060 | 0.6mm | 0.9mm | 1piece | JPY: 4,480 | USD: 27.88 |
|
|
 |
61-1256-79 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.6 x刀锋长度:0.9mm) MS2XLD0060N080 | MS2XLD0060N080 | 0.6mm | 0.9mm | 1piece | JPY: 7,470 | USD: 46.48 |
|
|
 |
61-1256-80 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.6 x刀锋长度:0.9mm) MS2XLD0060N100 | MS2XLD0060N100 | 0.6mm | 0.9mm | 1piece | JPY: 9,350 | USD: 58.18 |
|
|
 |
61-1256-81 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.7 x刀锋长度:1.0公厘) MS2XLD0070N020 | MS2XLD0070N020 | 0.7mm | 1.0mm | 1piece | JPY: 4,480 | USD: 27.88 |
|
|
 |
61-1256-82 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.7 x刀锋长度:1.0公厘) MS2XLD0070N040 | MS2XLD0070N040 | 0.7mm | 1.0mm | 1piece | JPY: 4,480 | USD: 27.88 |
|
|
 |
61-1256-83 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.7 x刀锋长度:1.0公厘) MS2XLD0070N080 | MS2XLD0070N080 | 0.7mm | 1.0mm | 1piece | JPY: 6,520 | USD: 40.57 |
|
|
 |
61-1256-84 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.8 x刀锋长度:1.2公厘) MS2XLD0080N040 | MS2XLD0080N040 | 0.8mm | 1.2mm | 1piece | JPY: 5,050 | USD: 31.42 |
|
|
 |
61-1256-85 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.8 x刀锋长度:1.2公厘) MS2XLD0080N060 | MS2XLD0080N060 | 0.8mm | 1.2mm | 1piece | JPY: 5,050 | USD: 31.42 |
|
|
 |
61-1256-86 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.8 x刀锋长度:1.2公厘) MS2XLD0080N080 | MS2XLD0080N080 | 0.8mm | 1.2mm | 1piece | JPY: 5,050 | USD: 31.42 |
|
|
 |
61-1256-87 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.8 x刀锋长度:1.2公厘) MS2XLD0080N100 | MS2XLD0080N100 | 0.8mm | 1.2mm | 1piece | JPY: 7,470 | USD: 46.48 |
|
|
 |
61-1256-88 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ0.9 x刀锋长度:1.4公厘) MS2XLD0090N060 | MS2XLD0090N060 | 0.9mm | 1.4mm | 1piece | JPY: 5,050 | USD: 31.42 |
|
|
 |
61-1256-89 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.0 x刀锋长度:1.5mm) MS2XLD0100N040 | MS2XLD0100N040 | 1.0mm | 1.5mm | 1piece | JPY: 4,670 | USD: 29.06 |
|
|
 |
61-1256-90 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.0 x刀锋长度:1.5mm) MS2XLD0100N060 | MS2XLD0100N060 | 1.0mm | 1.5mm | 1piece | JPY: 4,670 | USD: 29.06 |
|
|
 |
61-1256-91 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.0 x刀锋长度:1.5mm) MS2XLD0100N080 | MS2XLD0100N080 | 1.0mm | 1.5mm | 1piece | JPY: 4,670 | USD: 29.06 |
|
|
 |
61-1256-92 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.0 x刀锋长度:1.5mm) MS2XLD0100N100 | MS2XLD0100N100 | 1.0mm | 1.5mm | 1piece | JPY: 4,670 | USD: 29.06 |
|
|
 |
61-1256-93 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.0 x刀锋长度:1.5mm) MS2XLD0100N120 | MS2XLD0100N120 | 1.0mm | 1.5mm | 1piece | JPY: 4,670 | USD: 29.06 |
|
|
 |
61-1256-94 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.0 x刀锋长度:1.5mm) MS2XLD0100N200 | MS2XLD0100N200 | 1.0mm | 1.5mm | 1piece | JPY: 7,470 | USD: 46.48 |
|
|
 |
61-1256-95 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.0 x刀锋长度:1.5mm) MS2XLD0100N250 | MS2XLD0100N250 | 1.0mm | 1.5mm | 1piece | JPY: 8,430 | USD: 52.45 |
|
|
 |
61-1256-96 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.2 x刀锋长度:1.8公厘) MS2XLD0120N080 | MS2XLD0120N080 | 1.2mm | 1.8mm | 1piece | JPY: 4,850 | USD: 30.18 |
|
|
 |
61-1256-97 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.2 x刀锋长度:1.8公厘) MS2XLD0120N120 | MS2XLD0120N120 | 1.2mm | 1.8mm | 1piece | JPY: 4,850 | USD: 30.18 |
|
|
 |
61-1256-98 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.5 x刀锋长度:2.3公厘) MS2XLD0150N060 | MS2XLD0150N060 | 1.5mm | 2.3mm | 1piece | JPY: 4,850 | USD: 30.18 |
|
|
 |
61-1256-99 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.5 x刀锋长度:2.3公厘) MS2XLD0150N080 | MS2XLD0150N080 | 1.5mm | 2.3mm | 1piece | JPY: 4,850 | USD: 30.18 |
|
|
 |
61-1257-01 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.5 x刀锋长度:2.3公厘) MS2XLD0150N100 | MS2XLD0150N100 | 1.5mm | 2.3mm | 1piece | JPY: 4,850 | USD: 30.18 |
|
|
 |
61-1257-02 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.5 x刀锋长度:2.3公厘) MS2XLD0150N120 | MS2XLD0150N120 | 1.5mm | 2.3mm | 1piece | JPY: 4,850 | USD: 30.18 |
|
|
 |
61-1257-03 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.5 x刀锋长度:2.3公厘) MS2XLD0150N140 | MS2XLD0150N140 | 1.5mm | 2.3mm | 1piece | JPY: 4,850 | USD: 30.18 |
|
|
 |
61-1257-04 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.5 x刀锋长度:2.3公厘) MS2XLD0150N200 | MS2XLD0150N200 | 1.5mm | 2.3mm | 1piece | JPY: 4,850 | USD: 30.18 |
|
|
 |
61-1257-05 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ1.5 x刀锋长度:2.3公厘) MS2XLD0150N250 | MS2XLD0150N250 | 1.5mm | 2.3mm | 1piece | JPY: 7,470 | USD: 46.48 |
|
|
 |
61-1257-06 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ2.0 x刀锋长度:3.0公厘) MS2XLD0200N060 | MS2XLD0200N060 | 2.0mm | 3.0mm | 1piece | JPY: 4,960 | USD: 30.86 |
|
|
 |
61-1257-07 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ2.0 x刀锋长度:3.0公厘) MS2XLD0200N080 | MS2XLD0200N080 | 2.0mm | 3.0mm | 1piece | JPY: 4,960 | USD: 30.86 |
|
|
 |
61-1257-08 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ2.0 x刀锋长度:3.0公厘) MS2XLD0200N100 | MS2XLD0200N100 | 2.0mm | 3.0mm | 1piece | JPY: 4,960 | USD: 30.86 |
|
|
 |
61-1257-09 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ2.0 x刀锋长度:3.0公厘) MS2XLD0200N120 | MS2XLD0200N120 | 2.0mm | 3.0mm | 1piece | JPY: 4,960 | USD: 30.86 |
|
|
 |
61-1257-10 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ2.0 x刀锋长度:3.0公厘) MS2XLD0200N160 | MS2XLD0200N160 | 2.0mm | 3.0mm | 1piece | JPY: 4,960 | USD: 30.86 |
|
|
 |
61-1257-11 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ2.0 x刀锋长度:3.0公厘) MS2XLD0200N180 | MS2XLD0200N180 | 2.0mm | 3.0mm | 1piece | JPY: 4,960 | USD: 30.86 |
|
|
 |
61-1257-12 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ2.0 x刀锋长度:3.0公厘) MS2XLD0200N250 | MS2XLD0200N250 | 2.0mm | 3.0mm | 1piece | JPY: 4,960 | USD: 30.86 |
|
|
 |
61-1257-13 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ2.0 x刀锋长度:3.0公厘) MS2XLD0200N300 | MS2XLD0200N300 | 2.0mm | 3.0mm | 1piece | JPY: 6,160 | USD: 38.33 |
|
|
 |
61-1257-14 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ2.5 x刀锋长度:3.7公厘) MS2XLD0250N120 | MS2XLD0250N120 | 2.5mm | 3.7mm | 1piece | JPY: 5,050 | USD: 31.42 |
|
|
 |
61-1257-15 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ3.0 x刀锋长度:4.5公厘) MS2XLD0300N120 | MS2XLD0300N120 | 3.0mm | 4.5mm | 1piece | JPY: 6,520 | USD: 40.57 |
|
|
 |
61-1257-16 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ3.0 x刀锋长度:4.5公厘) MS2XLD0300N160 | MS2XLD0300N160 | 3.0mm | 4.5mm | 1piece | JPY: 6,520 | USD: 40.57 |
|
|
 |
61-1257-17 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ3.0 x刀锋长度:4.5公厘) MS2XLD0300N200 | MS2XLD0300N200 | 3.0mm | 4.5mm | 1piece | JPY: 6,520 | USD: 40.57 |
|
|
 |
61-1257-18 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ3.0 x刀锋长度:4.5公厘) MS2XLD0300N250 | MS2XLD0300N250 | 3.0mm | 4.5mm | 1piece | JPY: 6,520 | USD: 40.57 |
|
|
 |
61-1257-19 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ3.0 x刀锋长度:4.5公厘) MS2XLD0300N300 | MS2XLD0300N300 | 3.0mm | 4.5mm | 1piece | JPY: 7,670 | USD: 47.72 |
|
|
 |
61-1257-20 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ3.0 x刀锋长度:4.5公厘) MS2XLD0300N400 | MS2XLD0300N400 | 3.0mm | 4.5mm | 1piece | JPY: 8,040 | USD: 50.03 |
|
|
 |
61-1257-21 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ3.0 x刀锋长度:4.5公厘) MS2XLD0300N500 | MS2XLD0300N500 | 3.0mm | 4.5mm | 1piece | JPY: 11,300 | USD: 70.31 |
|
|
 |
61-1257-22 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ4.0 x刀锋长度:6.0公厘) MS2XLD0400N160 | MS2XLD0400N160 | 4.0mm | 6.0mm | 1piece | JPY: 7,840 | USD: 48.78 |
|
|
 |
61-1257-23 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ4.0 x刀锋长度:6.0公厘) MS2XLD0400N200 | MS2XLD0400N200 | 4.0mm | 6.0mm | 1piece | JPY: 7,840 | USD: 48.78 |
|
|
 |
61-1257-24 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ4.0 x刀锋长度:6.0公厘) MS2XLD0400N250 | MS2XLD0400N250 | 4.0mm | 6.0mm | 1piece | JPY: 7,840 | USD: 48.78 |
|
|
 |
61-1257-25 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ4.0 x刀锋长度:6.0公厘) MS2XLD0400N300 | MS2XLD0400N300 | 4.0mm | 6.0mm | 1piece | JPY: 7,840 | USD: 48.78 |
|
|
 |
61-1257-26 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ4.0 x刀锋长度:6.0公厘) MS2XLD0400N400 | MS2XLD0400N400 | 4.0mm | 6.0mm | 1piece | JPY: 9,800 | USD: 60.98 |
|
|
 |
61-1257-27 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ4.0 x刀锋长度:6.0公厘) MS2XLD0400N500 | MS2XLD0400N500 | 4.0mm | 6.0mm | 1piece | JPY: 14,900 | USD: 92.71 |
|
|
 |
61-1257-28 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ4.0 x刀锋长度:6.0公厘) MS2XLD0400N600 | MS2XLD0400N600 | 4.0mm | 6.0mm | 1piece | JPY: 17,100 | USD: 106.40 |
|
|
 |
61-1257-29 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ5.0 x刀锋长度:7.5公厘) MS2XLD0500N250 | MS2XLD0500N250 | 5.0mm | 7.5mm | 1piece | JPY: 9,800 | USD: 60.98 |
|
|
 |
61-1257-30 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ5.0 x刀锋长度:7.5公厘) MS2XLD0500N350 | MS2XLD0500N350 | 5.0mm | 7.5mm | 1piece | JPY: 9,800 | USD: 60.98 |
|
|
 |
61-1257-31 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ5.0 x刀锋长度:7.5公厘) MS2XLD0500N500 | MS2XLD0500N500 | 5.0mm | 7.5mm | 1piece | JPY: 14,900 | USD: 92.71 |
|
|
 |
61-1257-32 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ5.0 x刀锋长度:7.5公厘) MS2XLD0500N600 | MS2XLD0500N600 | 5.0mm | 7.5mm | 1piece | JPY: 17,100 | USD: 106.40 |
|
|
 |
61-1257-33 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ6.0 x刀锋长度:9.0公厘) MS2XLD0600N300 | MS2XLD0600N300 | 6.0mm | 9.0mm | 1piece | JPY: 9,800 | USD: 60.98 |
|
|
 |
61-1257-34 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ6.0 x刀锋长度:9.0公厘) MS2XLD0600N400 | MS2XLD0600N400 | 6.0mm | 9.0mm | 1piece | JPY: 11,800 | USD: 73.42 |
|
|
 |
61-1257-35 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ6.0 x刀锋长度:9.0公厘) MS2XLD0600N500 | MS2XLD0600N500 | 6.0mm | 9.0mm | 1piece | JPY: 14,900 | USD: 92.71 |
|
|
 |
61-1257-36 | MSTAR碳化物小直径终端(MS2XL,一般用途，2个刀锋，Φ6.0 x刀锋长度:9.0公厘) MS2XLD0600N600 | MS2XLD0600N600 | 6.0mm | 9.0mm | 1piece | JPY: 17,800 | USD: 110.75 |
|