功能

• This is a "temperature and humidity" data logger that can store up to 16,000 measurements.
• The memory interval of 1 second is approximately 4 hours, and the memory interval of 90 minutes is approximately 2 years and 9 months.
• How to calculate total storage time from storage interval and storage capacity: storage capacity x storage interval = total storage time # # Example: 16000 x 5 seconds =22.2 hours # You can choose from 14 storage intervals.
• * Data can be stored at various intervals: 1 second, 2 seconds, 5 seconds, 10 seconds, 15 seconds, 30 seconds, 1 minute, 2 minutes, 5 minutes, 10 minutes, 15 minutes, 30 minutes, 60 minutes and 90 minutes.
• Memory appointments are available.
• If you reserve (set) a date and time to start memory, memory will automatically start at the reserved date and time.
• Integrated sensor SK-L754-1 is included.
• You can choose from the following four storage methods according to your intended use.
• 1. One-time method: This method keeps storing data until the memory is full. Memory is automatically terminated when the number of stored data reaches 16000.
• 2. Endless method (Overwrite mode) When the memory is full, data is overwritten from the beginning. It is the best method for collecting data for the last fixed period.
• 3. Data number specification method: You can specify the number of data items to be stored in advance between 1~16000. It is the best method when you do not want to take unnecessary data.
• 4. Page system (Memory split mode): The memory can be divided into 4 parts (4 pages). Each device sequentially stores data from different locations and times, allowing multiple devices to be used with one device. 1 page can store 4000 data.
• Analysis software is included as standard * * Standard graph processing, real-time monitoring and other stored data can be fully utilized. It can also be saved in CSV format, so you can use commercially available spreadsheet software.
• Key-lock function prevents misoperation during memory.
• Upper and lower alarm values can be set (When the alarm is activated, the LED lights and the "Hi/Lo" mark on the LCD flashes.)
• Either battery or AC adapter (sold separately) can be used.
• The AC adapter has priority when used in combination. When the power supply from the AC adapter stops due to a power failure, etc., the battery automatically switches to the battery.
• The stored measurement data is stored in the internal memory even if the power is turned off.
• The stored measurement data can be downloaded to a PC or copied to a microSD memory card (sold separately). (It can be copied while it is being stored.)
• A six-digit ID number can be assigned to the device. If you use more than one unit, you can easily identify the equipment.
• - Analysis Software Features
• ★ Up to 10 indicators can be connected simultaneously using a USB hub.
• ★ Graph display, storage, printing and analysis according to usage (Expansion, reduction, period selection, integrated temperature analysis function, etc.).
• ★ Data can be analyzed with commercially available spreadsheet software when saved in CSV format.
• ★ real-time monitoring. During real-time monitoring, alarm settings can be set and alert emails can be sent to pre-registered email addresses.
• Compatible OS: Windows10/8.1/8 (all 64bit/32bit Japanese versions).
• Memory: 4GB or more (32bit)8GB or more (64bit) Hard disk: 4GB or more of free space required Other: USB port, CD-ROM drive required Internet connection and email address required to use mail alert function