AS ONE AS ONE

登载商品 : 300万项
使用方法
Cách sử dụng
联络我们
AS ONE Corporation

1-5505-21　旋风斜角风扇搅拌叶片 (带轮毂) φ100mm　DF-100

功能

  • 只要轴是φ8*mm*，带凸台的搅拌叶片可以固定在任何位置。　
  • 除了带凸台的搅拌叶片外，搅拌叶片用旋钮螺钉固定在轴的顶部。

规格

  • 型号:DF-100
  • 类型:斜角风扇 (含凸台)
  • 叶片直径 (φmm) :100
  • 材质:不锈钢 (SUS316)
  • *尺寸越大，电阻越大。搅拌器的负荷根据容器、容量和粘度而增加。请注意。
  • ※根据各种搅拌叶片的大小和形状，主体的负荷会发生变化。负载也根据目标容量和粘度而变化。请调节转速。
  • RoHS3 (EU)2015/863 Certificates can be issued [关于RoHS]
  •  

封装大小：95×95×20 mm　40 g　 [关于封装大小]

第号命令。 1-5505-21
型号号。 DF-100
JAN代码 4582110982729
标准价格 JPY: 7,270 USD: 45.57
Excange rate 1USD= 159.53JPY
Valid price in Japan
数量 1piece
日本股票
供应商存货

产品种类 （尺寸不同·规格不同·选配品等）

产品图像 第号命令。 名称 型号号。 Material (Wings)
 数量 标准价格 日本的有效价格 股票
[供应商存货]
1-5505-20 旋风螺旋桨搅拌叶片 (带轮毂) φ100mm　P-100 P-100 Stainless steel 1piece JPY: 7,330 USD: 45.95

1-5505-21 旋风斜角风扇搅拌叶片 (带轮毂) φ100mm　DF-100 DF-100 Stainless steel 1piece JPY: 7,270 USD: 45.57

1-5505-22 龙卷风涡轮机的搅拌叶片 (带轮毂) φ100mm　T-100 T-100 Stainless steel 1piece JPY: 7,290 USD: 45.70

1-5505-23 旋风刮板搅拌叶片 (带轮毂) φ125mm　FP-125 FP-125 Stainless steel 1piece JPY: 12,300 USD: 77.10

1-5505-24 旋风风扇涡轮机的搅拌叶片 (带轮毂) φ125mm　FUT-125 FUT-125 Stainless steel 1piece JPY: 11,400 USD: 71.46

1-5505-25 龙卷风螺旋桨搅拌叶片 (带轮毂) φ125mm　P-125 P-125 Stainless steel 1piece JPY: 9,600 USD: 60.18

1-5505-26 旋风斜角风扇搅拌叶片 (带轮毂) φ125mm　DF-125 DF-125 Stainless steel 1piece JPY: 9,480 USD: 59.43

1-5505-27 龙卷风涡轮机的搅拌叶片 (带轮毂) φ125mm　T-125 T-125 Stainless steel 1piece JPY: 9,540 USD: 59.80

1-5505-28 旋风广场搅拌叶片 (带轮毂) φ75mm　SK-75 SK-75 Stainless steel 1piece JPY: 14,600 USD: 91.52

1-5505-29 旋风环搅拌叶片 (带轮毂) φ75mm　R-75 R-75 Stainless steel 1piece JPY: 14,500 USD: 90.89

1-5505-01 旋风风机搅拌叶片40mm　F-40 F-40 Stainless steel 1piece JPY: 460 USD: 2.88

1-5505-02 旋风推进器搅拌叶片60mm　P-60 P-60 Stainless steel 1piece JPY: 480 USD: 3.01

1-5505-03 旋风斜角风扇搅拌叶片70mm　DF-70 DF-70 Stainless steel 1piece JPY: 580 USD: 3.64

1-5505-04 龙卷风涡轮的搅拌叶片φ80mm　T-80 T-80 Stainless steel 1piece JPY: 780 USD: 4.89

1-5505-05 旋风螺旋桨搅拌叶片 (带轮毂) φ60mm　PB-60 PB-60 Stainless steel 1piece JPY: 1,300 USD: 8.15

1-5505-06 旋风斜角风扇搅拌叶片 (带轮毂) φ70mm　DFB-70 DFB-70 Stainless steel 1piece JPY: 1,760 USD: 11.03

1-5505-07 龙卷风涡轮机的搅拌叶片 (带轮毂) φ80mm　TB-80 TB-80 Stainless steel 1piece JPY: 1,860 USD: 11.66

1-5505-08 龙卷风涡轮机的搅拌叶片 (带轮毂) φ50mm　FP-50 FP-50 Stainless steel 1piece JPY: 7,100 USD: 44.51

1-5505-09 龙卷风盘式涡轮机的搅拌叶片 (带轮毂) φ50mm　DT-50 DT-50 Stainless steel 1piece JPY: 7,000 USD: 43.88

1-5505-10 Tornado Flat Turbine (带Boss) 搅拌叶片φ50mm　FT-50 FT-50 Stainless steel 1piece JPY: 6,800 USD: 42.63

1-5505-11 旋风风扇涡轮的搅拌叶片 (带轮毂) φ50mm　FUT-50 FUT-50 Stainless steel 1piece JPY: 6,500 USD: 40.75

1-5505-12 龙卷风涡轮机的搅拌叶片 (带轮毂) φ75mm　FP-75 FP-75 Stainless steel 1piece JPY: 8,900 USD: 55.79

1-5505-13 旋风圆盘涡轮机的搅拌叶片 (带轮毂) φ75mm　DT-75 DT-75 Stainless steel 1piece JPY: 9,000 USD: 56.42

1-5505-14 Tornado Flat Turbine (带Boss) 搅拌叶片φ75mm　FT-75 FT-75 Stainless steel 1piece JPY: 9,500 USD: 59.55

1-5505-15 旋风风扇涡轮的搅拌叶片 (带轮毂) φ75mm　FUT-75 FUT-75 Stainless steel 1piece JPY: 8,100 USD: 50.77

1-5505-16 龙卷风涡轮机的搅拌叶片 (带轮毂) φ100mm　FP-100 FP-100 Stainless steel 1piece JPY: 9,700 USD: 60.80

1-5505-17 旋风圆盘涡轮机的搅拌叶片 (带轮毂) φ100mm　DT-100 DT-100 Stainless steel 1piece JPY: 11,000 USD: 68.95

1-5505-18 旋风平机搅拌叶片 (带轮毂) φ100mm　FT-100 FT-100 Stainless steel 1piece JPY: 11,200 USD: 70.21

1-5505-19 旋风风扇涡轮的搅拌叶片 (带轮毂) φ100mm　FUT-100 FUT-100 Stainless steel 1piece JPY: 8,800 USD: 55.16

1-5505-30 Tornado Anchor搅拌刀片 (带老板)　A-80 A-80 1piece JPY: 15,900 USD: 99.67

1-5505-31 Tornado Anchor搅拌刀片 (带老板)　A-110 A-110 1piece JPY: 19,200 USD: 120.35

相关产品

1 / 1 ページ

［已停用］龙卷风搅拌器标准50 -3000 rpm SM-101

［已停用］龙卷风搅拌器标准50 -3000 rpm SM-101

［Discontinued］Tornado (Agitator) with standard 50 ~ 3000 rpm with Pre-shipment Inspection Certificate SM-101

［Discontinued］Tornado (Agitator) with standard 50 ~ 3000 rpm with Pre-shipment Inspection Certificate SM-101

［Discontinued］Tornado (Agitator) Standard 50 ~ 3000 rpm with Pre-shipment Validation SM-101

［Discontinued］Tornado (Agitator) Standard 50 ~ 3000 rpm with Pre-shipment Validation SM-101

［已停用］龙卷风搅拌器标准20 -1200 rpm SM-102

［已停用］龙卷风搅拌器标准20 -1200 rpm SM-102

［Discontinued］Tornado (Agitator) with standard 20 ~ 1200 rpm with Pre-shipment Inspection Certificate SM-102

［Discontinued］Tornado (Agitator) with standard 20 ~ 1200 rpm with Pre-shipment Inspection Certificate SM-102

［Discontinued］Tornado (Agitator) Standard 20 ~ 1200 rpm with Pre-shipment Validation SM-102

［Discontinued］Tornado (Agitator) Standard 20 ~ 1200 rpm with Pre-shipment Validation SM-102

［已停用］龙卷风搅拌器标准10 -600 rpm SM-103

［已停用］龙卷风搅拌器标准10 -600 rpm SM-103

［Discontinued］Tornado (Agitator) with standard 10 ~ 600 rpm with Pre-shipment Inspection Certificate SM-103

［Discontinued］Tornado (Agitator) with standard 10 ~ 600 rpm with Pre-shipment Inspection Certificate SM-103

［Discontinued］Tornado (Agitator) Standard 10 ~ 600 rpm with Pre-shipment Validation SM-103

［Discontinued］Tornado (Agitator) Standard 10 ~ 600 rpm with Pre-shipment Validation SM-103

［已停用］龙卷风搅拌器标准5 -300 rpm SM-104

［已停用］龙卷风搅拌器标准5 -300 rpm SM-104

［Discontinued］Tornado (Agitator) with standard 5 ~ 300 rpm with Pre-shipment Inspection Certificate SM-104

［Discontinued］Tornado (Agitator) with standard 5 ~ 300 rpm with Pre-shipment Inspection Certificate SM-104

［Discontinued］Tornado (Agitator) Standard 5 ~ 300 rpm with Pre-shipment Validation SM-104

［Discontinued］Tornado (Agitator) Standard 5 ~ 300 rpm with Pre-shipment Validation SM-104

［已停用］Timer 50 -3000 rpm龙卷风搅拌器 SMT-101

［已停用］Timer 50 -3000 rpm龙卷风搅拌器 SMT-101

［Discontinued］Tornado (Agitator) with Timer, 50 ~ 3000 rpm with Pre-shipment Inspection Certificate SMT-101

［Discontinued］Tornado (Agitator) with Timer, 50 ~ 3000 rpm with Pre-shipment Inspection Certificate SMT-101

［Discontinued］Tornado (Agitator) with Timer, 50 ~ 3000 rpm with Pre-shipment Validation SMT-101

［Discontinued］Tornado (Agitator) with Timer, 50 ~ 3000 rpm with Pre-shipment Validation SMT-101

［已停用］Timer 20 -1200 rpm龙卷风搅拌器 SMT-102

［已停用］Timer 20 -1200 rpm龙卷风搅拌器 SMT-102

［Discontinued］Tornado (Agitator) with Timer, 20 ~ 1200 rpm with Pre-shipment Inspection Certificate SMT-102

［Discontinued］Tornado (Agitator) with Timer, 20 ~ 1200 rpm with Pre-shipment Inspection Certificate SMT-102

［Discontinued］Tornado (Agitator) with Timer, 20 ~ 1200 rpm with Pre-shipment Validation SMT-102

［Discontinued］Tornado (Agitator) with Timer, 20 ~ 1200 rpm with Pre-shipment Validation SMT-102

［已停用］Timer 10 -600 rpm龙卷风搅拌器 SMT-103

［已停用］Timer 10 -600 rpm龙卷风搅拌器 SMT-103

［Discontinued］Tornado (Agitator) with Timer, 10 ~ 600 rpm with Pre-shipment Inspection Certificate SMT-103

［Discontinued］Tornado (Agitator) with Timer, 10 ~ 600 rpm with Pre-shipment Inspection Certificate SMT-103

［Discontinued］Tornado (Agitator) with Timer, 10 ~ 600 rpm with Pre-shipment Validation SMT-103

［Discontinued］Tornado (Agitator) with Timer, 10 ~ 600 rpm with Pre-shipment Validation SMT-103

［已停用］Timer 5 -300 rpm龙卷风搅拌器 SMT-104

［已停用］Timer 5 -300 rpm龙卷风搅拌器 SMT-104

［Discontinued］Tornado (Agitator) with Timer, 5 ~ 300 rpm with Pre-shipment Inspection Certificate SMT-104

［Discontinued］Tornado (Agitator) with Timer, 5 ~ 300 rpm with Pre-shipment Inspection Certificate SMT-104

［Discontinued］Tornado (Agitator) with Timer, 5 ~ 300 rpm with Pre-shipment Validation SMT-104

［Discontinued］Tornado (Agitator) with Timer, 5 ~ 300 rpm with Pre-shipment Validation SMT-104

［已停用］龙卷风搅拌器高输出型50 -3000 rpm PM-201

［已停用］龙卷风搅拌器高输出型50 -3000 rpm PM-201

［Discontinued］Tornado (Agitator) high Torque type with 50 ~ 3000 rpm with Pre-shipment Inspection Certificate PM-201

［Discontinued］Tornado (Agitator) high Torque type with 50 ~ 3000 rpm with Pre-shipment Inspection Certificate PM-201

［Discontinued］Tornado (Agitator) High Torque type 50 ~ 3000 rpm with Pre-shipment Validation PM-201

［Discontinued］Tornado (Agitator) High Torque type 50 ~ 3000 rpm with Pre-shipment Validation PM-201

［已停用］龙卷风搅拌器高输出型20 -1200 rpm PM-202

［已停用］龙卷风搅拌器高输出型20 -1200 rpm PM-202

［Discontinued］Tornado (Agitator) high Torque type with 20 ~ 1200 rpm with Pre-shipment Inspection Certificate PM-202

［Discontinued］Tornado (Agitator) high Torque type with 20 ~ 1200 rpm with Pre-shipment Inspection Certificate PM-202

［Discontinued］Tornado (Agitator) High Torque type 20 ~ 1200 rpm with Pre-shipment Validation PM-202

［Discontinued］Tornado (Agitator) High Torque type 20 ~ 1200 rpm with Pre-shipment Validation PM-202

［已停用］龙卷风搅拌器高输出型10 -600 rpm PM-203

［已停用］龙卷风搅拌器高输出型10 -600 rpm PM-203

［Discontinued］Tornado (Agitator) high Torque type with 10 ~ 600 rpm with Pre-shipment Inspection Certificate PM-203

［Discontinued］Tornado (Agitator) high Torque type with 10 ~ 600 rpm with Pre-shipment Inspection Certificate PM-203

［Discontinued］Tornado (Agitator) High Torque type 10 ~ 600 rpm with Pre-shipment Validation PM-203

［Discontinued］Tornado (Agitator) High Torque type 10 ~ 600 rpm with Pre-shipment Validation PM-203

［已停用］龙卷风搅拌器高输出5 -300 rpm PM-204

［已停用］龙卷风搅拌器高输出5 -300 rpm PM-204

［Discontinued］Tornado (Agitator) high Torque type with 5 ~ 300 rpm with Pre-shipment Inspection Certificate PM-204

［Discontinued］Tornado (Agitator) high Torque type with 5 ~ 300 rpm with Pre-shipment Inspection Certificate PM-204

［Discontinued］Tornado (Agitator) High Torque type 5 ~ 300 rpm with Pre-shipment Validation PM-204

［Discontinued］Tornado (Agitator) High Torque type 5 ~ 300 rpm with Pre-shipment Validation PM-204

产品目录

目录名称 页面
AS ONE Catalog 2025 [Instruments for Laboratory] 192
AS ONE Catalog 2023 [Instruments for Laboratory] 202
AS ONE Catalog 2021 [Instruments for Laboratory] 160
AS ONE Catalog 2019 [Instruments for Laboratory] 132
AS ONE Catalog 2017 [Instruments for Laboratory] 120

本页面是AS ONE CORPORATION销售的 旋风斜角风扇搅拌叶片 (带轮毂) φ100mm 页面。AXEL GLOBAL是一个网站，列出了300万多种产品，涉及广泛的领域，如研发，生产，半导体，医学，护理，食品卫生等。