TYROLIT

ที-กริน ชนิดออฟเซต　701518

This T-Grind product provides maximum performance for rough, grindstone and grinder work.
It exhibits high grinding ability for general steel, stainless steel, etc., and is especially suitable for rough cleaning work in shipyards, etc.

TYROLIT

ชนิดมาตรฐานของวงล้อตัด (ชนิดออฟเซต)

TYROLIT

ACCU สําหรับเครื่องบดมุมที่ใช้แบตเตอรี่　34022959

Even with a rechargeable disc grinder, this cutting whetstone provides the best performance.
Suitable for disconnecting work in places where there is no power supply such as outdoors.

TYROLIT

กําลังตัด&Gวงล้อลายน้ํา C&G

TYROLIT

คัตติงกรินสโตนลองไลฟ์

TYROLIT

คัตติงกรินสโตนลองไลฟ์

TYROLIT

คัตติงกรินสโตนลองไลฟ์　34332759

It is a cutting wheel with excellent "long life" and has an overwhelming product life (40% more on average) compared to the previous products.
It is a very safe whetstone with moderate flexibility and does not break easily.

TYROLIT

รถไฟฟ้าคัตติงสโตนพรีเมียมไลน์

TYROLIT

รถไฟฟ้าคัตติงสโตนพรีเมียมไลน์

TYROLIT

รถไฟฟ้าคัตติงสโตนสแตนดาร์ด

TYROLIT

ระบบล็อกนาฬิกาตัดหินพิเศษ สายพิเศษ

TYROLIT

［เลิกผลิตแล้ว］#36 125 มม.　706129

Fiber disc with long life and excellent grinding power.
Since it can be used without a back pad, replacement is minimal.

TYROLIT

［เลิกผลิตแล้ว］#40 125 มม.　160240

Can be used for both iron and stainless steel, as well as alloy and aluminum.
Tyrol's unique, optimally combined abrasive grain enables efficient work.

TYROLIT

［เลิกผลิตแล้ว］#60 125 มม.　160242

Can be used for both iron and stainless steel, as well as alloy and aluminum.
Tyrol's unique, optimally combined abrasive grain enables efficient work.

TYROLIT

［เลิกผลิตแล้ว］#80 125 มม.　160244

Can be used for both iron and stainless steel, as well as alloy and aluminum.
Tyrol's unique, optimally combined abrasive grain enables efficient work.

TYROLIT

［เลิกผลิตแล้ว］#30 125 มม.　34046131

Among TYROLIT's three grades, it is a premium line product.
High cutting performance for a wide range of workpieces, both iron and stainless steel.

TYROLIT

［เลิกผลิตแล้ว］#30 178 มม.　34046133

Among TYROLIT's three grades, it is a premium line product.
High cutting performance for a wide range of workpieces, both iron and stainless steel.

TYROLIT

［เลิกผลิตแล้ว］#40 Flap　34063388

It has the right amount of flexibility and is soft to work.
Long life type.

TYROLIT

［เลิกผลิตแล้ว］#60 Flap　34063389

It has the right amount of flexibility and is soft to work.
Long life type.

TYROLIT

［เลิกผลิตแล้ว］#80 Flap　34063390

It has the right amount of flexibility and is soft to work.
Long life type.

TYROLIT

［เลิกผลิตแล้ว］#120 Flap　34063391

It has the right amount of flexibility and is soft to work.
Long life type.

TYROLIT

［เลิกผลิตแล้ว］เซรามิกดิสก์ Flap #80 125 มม.　34166671

Provides optimum performance against stainless steel materials.
The grinding wheel scrapes during use to achieve a long life.

TYROLIT

［เลิกผลิตแล้ว］Counding Weel Long Life 178 x 1.6 x 22.23 มม.　34194859

It is a cutting wheel with excellent "long life" and has an overwhelming product life (40% more on average) compared to the previous products.
It is a very safe whetstone with moderate flexibility and does not break easily.

TYROLIT

［เลิกผลิตแล้ว］#46 125 มม.　342978

The cut surface is very clean.
Since it is very light, the load on the machine can be reduced.

TYROLIT

［เลิกผลิตแล้ว］#30 125 มม.　367572

The cut surface is very clean.
Since it is very light, the load on the machine can be reduced.

TYROLIT

［เลิกผลิตแล้ว］การตัดตัด Grindstone Premium Type 125 x 1.6 x 22.23 มม.　51844

Among TYROLIT's three grades, it is a premium line product.
Used for both iron and stainless steel, it exhibits high cutting performance for a wide range of workpieces, but especially for stainless steel.

TYROLIT

［เลิกผลิตแล้ว］#24 125 มม.　57005

The conical shape allows the workpiece to be soft without scratching.
It suppresses vibration to the extreme and is friendly to both machines and workers.

TYROLIT

［เลิกผลิตแล้ว］Flap Disk Premium Type 125mm #120 643805　643805

Can be used for both iron and stainless steel, as well as alloy and aluminum.
Tyrol's unique, optimally combined abrasive grain enables efficient work.

TYROLIT

［เลิกผลิตแล้ว］เซรามิกดิสก์ Flap #60 125 มม.　645137

Provides optimum performance against stainless steel materials.
The grinding wheel scrapes during use to achieve a long life.

TYROLIT

［เลิกผลิตแล้ว］Flap Disk Premium Type 125mm #40 668634　668634

Provides optimal performance for work corners.
The back pad uses hard fibers and can be ground hard.

TYROLIT

［เลิกผลิตแล้ว］Flap Disk Premium Type 125 มม. #60 668635　668635

Provides optimal performance for work corners.
The back pad uses hard fibers and can be ground hard.

TYROLIT

［เลิกผลิตแล้ว］Flap Disk Premium Type 125 มม. #80 668637　668637

Provides optimal performance for work corners.
The back pad uses hard fibers and can be ground hard.

TYROLIT

［เลิกผลิตแล้ว］Flap Disk Premium Type 125 มม. #80 66865　668665

Can be used for both iron and stainless steel, as well as alloy and aluminum.
Tyrol's unique, optimally combined abrasive grain enables efficient work.

TYROLIT

［เลิกผลิตแล้ว］Flap Disk Premium Type 125mm #40 668681　668681

Provides optimal performance for work corners.
The back pad uses hard fibers and can be ground hard.

TYROLIT

［เลิกผลิตแล้ว］การตัด Gindstone Premium Type 125 x 1 x 22.23 มม.　674473

Among TYROLIT's three grades, it is a premium line product.
Used for both iron and stainless steel, it exhibits high cutting performance for a wide range of workpieces, but especially for stainless steel.

TYROLIT

［เลิกผลิตแล้ว］Flap Disk Premium Type 125 มม. #60 728528　728528

Provides optimal performance for work corners.
The back pad uses hard fibers and can be ground hard.

TYROLIT

［เลิกผลิตแล้ว］Flap Disk Premium Type 125mm #80 817672　817672

Provides optimal performance for work corners.
The back pad uses hard fibers and can be ground hard.

TYROLIT

［เลิกผลิตแล้ว］Flap Disk Premium Type 125mm #120 896379　896379

Provides optimal performance for work corners.
The back pad uses hard fibers and can be ground hard.

TYROLIT

［เลิกผลิตแล้ว］#36 125 มม.　908227

The conical shape allows the workpiece to be soft without scratching.
It suppresses vibration to the extreme and is friendly to both machines and workers.

TYROLIT

［เลิกผลิตแล้ว］#60 125 มม.　908229

The conical shape allows the workpiece to be soft without scratching.
It suppresses vibration to the extreme and is friendly to both machines and workers.