Omikogyo Co., Ltd.

บิตบาสบอร์ด (ขนาดเส้นผ่าศูนย์กลางเบลด: 12.7 มม.)　V46

By making two cuts in the opening corner of the baseboard at the joint of the wall and floor of the house with the baseboard bit, it is processed into a flat and safe shape with little peeling and chipping.
Work Material: Wood.

Omikogyo Co., Ltd.

Nick บิต (6 มม.)

Omikogyo Co., Ltd.

Carbide Drill Bit (งานไม้, ความยาวตรง, Φ3 x Blade 10 x ความยาวรวม 35 มม.)

Omikogyo Co., Ltd.

บิตมุม (ที่มีแถบนําเสนอ หมายเลขรุ่น: 30031)

Omikogyo Co., Ltd.

ลดค่าบิต (ขนาดเบลดขนาดเส้นผ่านศูนย์กลาง 10 มม.)

Omikogyo Co., Ltd.

สามารถปรับค่า Groove คัตเตอร์ได้ (3 เป็น 15 มม.)　120G

It is OK to use one cutter from narrow groove to wide groove.
The number of blades is larger than that of a normal cutter, and the screw of the wooden mouth hardly comes out.

Omikogyo Co., Ltd.

มุมบิต (รูปร่างกลมอย่างง่าย 1.5)　B15

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

มุมบิต (รูปร่างกลมอย่างง่าย 2.5)　B25

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

บิตตรง (พร้อมเส้นบอกแนว, 6 x 10 M15)　GM15

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

บิตตรง (พร้อมเส้นบอกแนว, 6 x 10 S6)　GS6

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

มุมบิต (บิตชาย)　HB

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

บิตมุม (6 x 6.35)　KM635

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

บิตมุม (ตัดช่อง 75°, Φ18มม.)　KM75

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

Bit มุม (ความตัด DX, 12 x 12)　MDX12

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

บิตมุม (ตัดร่วม, ยาว 25)　ML25

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

ปรับค่า Groove คัตเตอร์ได้ (3 เป็น 21)　W21G

It is OK to use one cutter from narrow groove to wide groove.
The number of blades is larger than that of a normal cutter, and the screw of the wooden mouth hardly comes out.

Omikogyo Co., Ltd.

บิตมุม (Groove ด้านข้าง, 3 x 4.5)　YB3

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

บิตมุม (Groove ด้านข้าง, 6 x 8)　YB6

Anyone can easily chamfer decoras, plywood, wood, plastic, artificial marble, etc., and it finishes beautifully.
Since the bearing serves as a guide, it can freely chamfer curves, straight lines, inside, outside, and corners.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］Carbide Drill Bit (งานไม้, ความยาวตรง, Φ6 x Blade 20 x ความยาวรวม 50 มม.)

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］V Groove Bit (Woodwork, 6 x 90°)　V90

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］U Groove Bit (Woodwork, 6 x 6R3)

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］Drill Bit (แผงโครงสร้างแบบแฟลช, 1 ขั้น, 6 x 6)

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］ดูรายละเอียดบิต (แผงโครงสร้างแฟลช, Carbide Tip, 1 ขั้น, 12 x 10)　1F1210

The part without the blade is the guide. Cut out along the base frame.
It can cut at about 20,000 ~ 30,000 revolutions per minute.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］Woodwork Bit (Carbide 1 Stage Flash บิต, 2P, 6 x 6)　1F66

Suitable for cutting out one side of veneer, board, etc.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］บิตวูด (Carbide 2 Stages Flash บิต, 12 x 12)　2F1212

Cut out two boards such as a door in one shot.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］บิตวูด (Carbide 2 ขั้นตอน Flash บิต, 6 x 6)　2F66

Cut out two boards such as a door in one shot.
Work material: Woody material, gypsum board, etc.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］วูดเวิร์ค บิต (คาร์ไบด์ คัตเตอร์, 2D, 6 x 12)　A2D

Both male and female ant grooving can be done with one.
Cutting at about 20,000 ~ 30,000 revolutions per minute. Excellent sharpness, long life, and clean processing.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］บิตงานไม้ (Strong 1 stage Flash บิต, 8 x 8)　K1F88

High rigidity high speed material is adopted for the base metal part, and it is also compatible with heavy cutting such as 2×4 window drawing.
The tip blade has a high speed blade, and the cutting blade has a super hard outer blade with good scrub, enabling faster work than conventional products.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］ฟืนไม้บิต (คาร์ไบด์ตรง, 12 x 10)　S1210

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］ฟืนไม้บิต (คาร์ไบด์ตรง, 12 x 12)　S1212

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］ฟืนไม้บิต (คาร์ไบด์ตรง, 12 x 8)　S128

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］บิตวูดเวิร์ก (คาร์ไบด์ตรง, 8 x 8)　S88

Can cut at 20,000 ~25000 revolutions per minute.
Has a long life with good sharpness and can be processed cleanly.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］บิตงานไม้ (U Groove Bit, 6 x 10 R5)　U610

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Excellent sharpness, long life, and clean processing.

Omikogyo Co., Ltd.

［สินค้าคงคลังหมด］U Groove Bit (Woodwork, 6 x 8R4)　U68

It can cut at about 20,000 ~ 30,000 revolutions per minute.
Excellent sharpness, long life, and clean processing.