[Unika Company Limited]สมุดบัญชีสีส้ม 2018 สินค้าใหม่
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
การล็อคบอร์ด เคลียร์แพ็ค B-412 (40 ชิ้น) B-412
Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.1พบ ผลิตภัณฑ์
JPY: 1,580
USD: 9.90
-
Steel Struck Value Pack F-425-SV (1000 ชิ้น) F-425-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1พบ ผลิตภัณฑ์
JPY: 2,810
USD: 17.61
-
Steel Value Pack F-432-SV (750 ชิ้น) F-432-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1พบ ผลิตภัณฑ์
JPY: 2,810
USD: 17.61
-
Steel Value Pack F-545-SV (300 ชิ้น) F-545-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1พบ ผลิตภัณฑ์
JPY: 2,810
USD: 17.61
-
Steel Value Pack F-560-SV (250 ชิ้น) F-560-SV
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.1พบ ผลิตภัณฑ์
JPY: 2,810
USD: 17.61
-
สกรูเหล็กไร้สนิมที่มีสนิท B Drill FS-432 (110 ชิ้น) FS-432B
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1พบ ผลิตภัณฑ์
JPY: 1,860
USD: 11.66
-
สกรูเหล็กไร้สีไร้สนิม โดยไม่มีสนิท B Drill FS-432DN (110 ชิ้น) FS-432DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1พบ ผลิตภัณฑ์
JPY: 1,510
USD: 9.47
-
สกรูเหล็กไร้สนิมที่มีสนิท B เจาะดูด FS-438B (85 ชิ้น) FS-438B
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1พบ ผลิตภัณฑ์
JPY: 1,860
USD: 11.66
-
สกรูเหล็กไร้สีไร้สนิม โดยไม่มีสนิท B Drill FS-438DN (85 ชิ้น) FS-438DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1พบ ผลิตภัณฑ์
JPY: 1,510
USD: 9.47
-
สกรูเหล็กไร้สีไร้สนิม โดยไม่มีสนิท B Drill FS-545DN (45 ชิ้น) FS-545DN
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
For mounting various types of piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, interior base materials, etc.1พบ ผลิตภัณฑ์
JPY: 1,510
USD: 9.47
-
HSS High Speed Holle Saw (ไม่มี Collar) 12 มม. HSS-12TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 2,210
USD: 13.85
-
HSS High Speed Holle Saw (ไม่มี Collar) 13 มม. HSS-13TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 2,210
USD: 13.85
-
HSS High Speed Holle Saw (ไม่มี Collar) 14 มม. HSS-14TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 2,210
USD: 13.85
-
HSS High Speed Holle Saw (ไม่มี Collar) 39 มม. HSS-39TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,330
USD: 27.14
-
HSS High Speed Holle Saw (ไม่มี Collar) 40 มม. HSS-40TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,400
USD: 27.58
-
HSS High Speed Holle Saw (ไม่มี Collar) 41 มม. HSS-41TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,400
USD: 27.58
-
HSS High Speed Holle Saw (ไม่มี Collar) 42 มม. HSS-42TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,400
USD: 27.58
-
HSS High Speed Holle Saw (ไม่มี Collar) 43 มม. HSS-43TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,400
USD: 27.58
-
HSS High Speed Holle Saw (ไม่มี Collar) 44 มม. HSS-44TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,400
USD: 27.58
-
HSS High Speed Holle Saw (ไม่มี Collar) 45 มม. HSS-45TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,880
USD: 30.59
-
HSS High Speed Holle Saw (ไม่มี Collar) 46 มม. HSS-46TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,880
USD: 30.59
-
HSS High Speed Holle Saw (ไม่มี Collar) 47 มม. HSS-47TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,880
USD: 30.59
-
HSS High Speed Holle Saw (ไม่มี Collar) 48มม. HSS-48TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,880
USD: 30.59
-
HSS High Speed Holle Saw (ไม่มี Collar) 49 มม. HSS-49TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 4,880
USD: 30.59
-
HSS High Speed Hole Saw (ไม่มี Collar) 50 มม. HSS-50TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 5,700
USD: 35.73
-
HSS High Speed Holle Saw (ไม่มี Collar) 51 มม. HSS-51TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 5,700
USD: 35.73
-
HSS High Speed Holle Saw (ไม่มี Collar) 52 มม. HSS-52TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 5,700
USD: 35.73
-
HSS High Speed Holle Saw (ไม่มี Collar) 53 มม. HSS-53TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 5,700
USD: 35.73
-
HSS High Speed Holle Saw (ไม่มี Collar) 54 มม. HSS-54TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 5,700
USD: 35.73
-
HSS High Speed Hole Saw (ไม่มี Collar) 55 มม. HSS-55TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 6,210
USD: 38.93
-
HSS High Speed Holle Saw (ไม่มี Collar) 56 มม. HSS-56TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 6,210
USD: 38.93
-
HSS High Speed Hole Saw (ไม่มี Collar) 57 มม. HSS-57TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 6,210
USD: 38.93
-
HSS High Speed Hole Saw (ไม่มี Collar) 58มม. HSS-58TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 6,210
USD: 38.93
-
HSS High Speed Holle Saw (ไม่มี Collar) 59 มม. HSS-59TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 6,210
USD: 38.93
-
HSS High Speed Holle Saw (ไม่มี Collar) 60 มม. HSS-60TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 6,880
USD: 43.13
-
HSS High Speed Holle Saw (ไม่มี Collar) 63 มม. HSS-63TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 6,880
USD: 43.13
-
HSS High Speed Holle Saw (ไม่มี Collar) 65 มม. HSS-65TN
With the use of an impact shaft shank, you can use a wide range of products from electric drills to impact drivers.
The body with an effective depth of 38 mm and the brimless specification allow work through the workpiece.1พบ ผลิตภัณฑ์
JPY: 7,430
USD: 46.57
-
META-CORE สูงสุด 35 ชั่วโมง Saw Standard Center Pin (IKURA SEIKI) MXCP35-8S
Center pin for Unicameta Core Max.
Work Material: Steel Plate, Shape Steel, Cast Iron Plate, Stainless Steel Plate, etc.1พบ ผลิตภัณฑ์
JPY: 1,650
USD: 10.34
-
META-CORE Max 50 Hole Saw Standard Center Pin (IKURA SEIKI) MXCP50-8S
Center pin for Unicameta Core Max.
Work Material: Steel Plate, Shape Steel, Cast Iron Plate, Stainless Steel Plate, etc.1พบ ผลิตภัณฑ์
JPY: 1,650
USD: 10.34
-
สกรูเหล็ก P-425B-S (200 ชิ้น) P-425B-S
Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.1พบ ผลิตภัณฑ์
JPY: 1,360
USD: 8.53
