Unika Company Limited

จุดยึดแผ่นงานด้านซ้ายสําหรับแถบขับขี่

Unika Company Limited

จุนิคอน สมอนสําหรับ PT-30 แถบขับขี่

Unika Company Limited

จูนิคอน สมอนสําหรับ S-30 แถบขับขี่

Unika Company Limited

Bic one Driver rod (กลไก SDS) ที่หนึ่งโดยเฉพาะ

Unika Company Limited

Bic One High Nut Driver rod (กลไก SDS)

Unika Company Limited

บิ๊กออนเคส เซ็ต B-02

Unika Company Limited

ประเภทการใส่ Resin A 165ml GE-165

Unika Company Limited

เอฟ-425-SMP แบบแพ็คขนาดเล็ก

Unika Company Limited

Mini Pack ที่ไม่ใช่ Plugius P-425 PIM-SM P

Unika Company Limited

Mini Pack Nonpluvius PW-425-SMP

Unika Company Limited

Driving bar for Root-Cut Anchor　58C

Drive rod for route-cut anchor.
It's for hand-handling.

Unika Company Limited

Non-Plavis Stainless Steel Sara B Drill Tsuki 150 Pieces　FS-425B

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.

Unika Company Limited

plug-less Anchor Non Plavis Stainless Steel Nabe B with Drill (150 bottles)　PS-425B

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Comes with 1 vibration drill for lower hole.

Unika Company Limited

Resin A Metal Brush 10　RA-MB10

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 13　RA-MB13

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 18　RA-MB18

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Metal Brush 28　RA-MB28

Metal brush for cleaning holes when using adhesive anchors.
Cleaning inside concrete holes

Unika Company Limited

Resin A Sleeve 10 pieces　RA-P2085

Plastic sleeve used when resin A, GE type is used for hollow base material.
Plastic sleeve used when resin A or GE type is used for hollow base material

Unika Company Limited

Resin A Push pumps　RA-PUP

Used to remove chips after drilling in concrete.
Cleaning inside concrete holes

Unika Company Limited

จุนิคอน สมมุติสําหรับขับรถแบบ SD-30S x 1000　SD30SX1000

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

จุนิคอน สมมุติสําหรับขับรถแบบ SD-30S x 500　SD30SX500

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Drive bar for UNICON Anchor long SD -30 x 1000　SD30X1000

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

Drive bar for UNICON Anchor long SD -30 x 500　SD30X500

Drive rod for Unicon anchor.
Mounted on a lightweight hammer drill and used in the hang mode.

Unika Company Limited

SDS-MA x Bits 17.5 x 305 mm　SDSMAX17.5X305

SDS-max hammer drill exclusive bit that efficiently transmits strong striking rotational force to the cutting edge without loss.
The integrated design from the shank to the cutting edge makes it extremely powerful for through-hole and deep-hole work.

Unika Company Limited

Unicon Anchor Bucket Set　UB-01

A convenient set of Unicon anchors for use in the field.
A drill for the lower hole and a driving rod for machine driving are included in the set.

Unika Company Limited

HC-U ประเภท Resin A HC-U (ประเภทด่าง) HC-10 U

Unika Company Limited

ประเภท Resin A SE (ประเภท sealing capsule) S E-10

Unika Company Limited

บอร์ดล็อค ล้างแพ็ค B-405　B-405

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

บอร์ดล็อค ล้างแพ็ค B-409　B-409

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

ล็อกบอร์ด ล้างแพ็ค B-416　B-416

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

บอร์ดล็อค ล้างแพ็ค B-423　B-423

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

ล็อกบอร์ด ล้างแพ็ค B-427　B-427

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

บอร์ดล็อค ล้างแพ็ค B-438　B-438

Since the wall is pressed from both inside and outside, it is firmly fixed to the hollow structural wall.
On the back side of the hollow structural wall, the plate part of the presser bends in two stages, thereby exhibiting more stable strength than conventional products.

Unika Company Limited

บิ๊กออน ออนยอร์ บัคเก็ต บีบี-03　BB-03

This is a convenient set of Big One anchors for suspension mounting.
A drill for the lower hole and a driving rod for machine driving are included in the set.

Unika Company Limited

Nonpluvius Stile Plat B Drill Plate Plat B Drill pear FS-525DN　FS-525DN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

P-535SDN แผ่นเงิน Nonpluvius Silver Pan B　P-535-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

Nonpluvius Silver Pan B Drill Pan P-545SDN　P-545-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

สายเจาะสีเงิน P-560SDN　P-560-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

สายเจาะสีเงิน P-570SDN　P-570-SDN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.

Unika Company Limited

แผ่นเหล็กไร้สนิม เจาะทะลุช่อง B โดยไม่มี PS-525DN　PS-525DN

Can be used for concrete without using a plug and with only a pre-hole, and can be easily installed with a normal screwdriver.
Various types of installation such as piping saddle fasteners, switch boxes, curtain rails, storage shelves, air conditioning equipment, lighting fixtures, and interior backing materials.