Muraki Ltd.

Gun Drill for General Purpose Machine Tool

Muraki Ltd.

Botek Gun Drill, Blade Diameter (mm): Φ8.2, Total Length (mm): 460

Muraki Ltd.

Botek Gun Drill Blade Diameter (mm): Φ5.1

Muraki Ltd.

99 Holder/NC Spot Drill

Muraki Ltd.

Dixi NC Center Drill　11068.0

Dixi NC Center Drill 1106 Series.
When mounting the tool to the machine, fix it securely so that it does not become loose or sway.

Muraki Ltd.

Dixi NC Center Drill　11074.0

Dixi NC Center Drill 1107 Series.
When mounting the tool to the machine, fix it securely so that it does not become loose or sway.

Muraki Ltd.

Dixi NC Center Drill　11064.0

Dixi NC Center Drill 1106 Series.
When mounting the tool to the machine, fix it securely so that it does not become loose or sway.

Muraki Ltd.

Dixi NC Center Drill　11063.0

Dixi NC Center Drill 1106 Series.
When mounting the tool to the machine, fix it securely so that it does not become loose or sway.

Muraki Ltd.

Dixi NC Center Drill　11066.0

Dixi NC Center Drill 1106 Series.
When mounting the tool to the machine, fix it securely so that it does not become loose or sway.

Muraki Ltd.

［เลิกผลิตแล้ว］สรุปสากล Carbide (สําหรับวัสดุความแข็งแรงสูง, Φ1.0 x Blade 13 x ความยาวรวม 38mm)

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.0 TiAlN　2401.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.1　2401.1

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.2　2401.2

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.3　2401.3

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.4　2401.4

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.6　2401.6

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.7　2401.7

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.8　2401.8

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ1.9　2401.9

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ10.0 TiAlN　24010.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ11.0 TiAlN　24011.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ12.0 TiAlN　24012.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.0 TiAlN　2402.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.1　2402.1

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.2　2402.2

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.3　2402.3

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.4　2402.4

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.6　2402.6

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.7　2402.7

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.8　2402.8

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ2.9　2402.9

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.0 TiAlN　2403.0TA

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.1　2403.1

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.2　2403.2

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.3　2403.3

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.4　2403.4

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.6　2403.6

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.7　2403.7

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.8　2403.8

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.

Muraki Ltd.

［Discontinued］MR Carbide Drill φ3.9　2403.9

Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.