[Muraki Ltd.]เครื่องมือตัด
ตัวกรอง
- ตามกลุ่มผลิตภัณฑ์
- ตามผลิตภัณฑ์
เรียงลําดับตาม:
-
Countersink (HSS) Tip Angle 90 °, Non-Coated Blade Diameter: 5.8
8พบ ผลิตภัณฑ์
JPY: 2,900-
USD: 18.19-
-
Countersink (HSS), Tip Angle 90 °, Titanium Coating, Blade Diameter: 13.4
4พบ ผลิตภัณฑ์
JPY: 3,800-
USD: 23.84-
-
Gun Drill for General Purpose Machine Tool
26พบ ผลิตภัณฑ์
JPY: 28,400-
USD: 178.15-
-
Countersink Bush Handle Mounting Adapter φ5.0
3พบ ผลิตภัณฑ์
JPY: 900-
USD: 5.65-
-
RUKO Countersink 2400-10.4
No chatter, no secondary burrs and a beautiful finished surface is possible.
It can be used for processing according to the application and work efficiency is improved.1พบ ผลิตภัณฑ์
JPY: 3,900
USD: 24.46
-
-
Maykestag Countersink ΦDc (mm): 6.3 Compatible Countersunk Head Screw: M3 L (mm): 45
8พบ ผลิตภัณฑ์
JPY: 2,900-
USD: 18.19-
-
RUKO Countersink ΦDc (mm): 6.3 L (mm): 45 d1 (mm): 1.5
6พบ ผลิตภัณฑ์
JPY: 3,300-
USD: 20.70-
-
RUKO Countersink ΦDc (mm): 8.0 L (mm): 50ΦDs (mm): 6 (h9)
6พบ ผลิตภัณฑ์
JPY: 3,700-
USD: 23.21-
-
RUKO Countersink ΦDc (mm): 6.3 Compatible Flat Head Screw: M3.0
7พบ ผลิตภัณฑ์
JPY: 6,700-
USD: 42.03-
-
99 Holder/NC Spot Drill Insert Type: V0820802Φd (mm): 3/8 "L (mm): 90 Screws: NS-30055/2. 0Nm Wrench: NK-T8
4พบ ผลิตภัณฑ์
JPY: 13,200-
USD: 82.80-
-
99 Holder/NC Spot Drill Φd (mm): 12 L (mm): 100 Screw: NS-35080/2. 5Nm Wrench: NK-T15
6พบ ผลิตภัณฑ์
JPY: 15,000-
USD: 94.09-
-
99 Holder/NC Spot Drill Insert Type: V9MT08Φd (mm): 8 L (mm): 60
2พบ ผลิตภัณฑ์
JPY: 15,900-
USD: 99.74-
-
Botek Gun Drill, Blade Diameter (mm): Φ8.2, Total Length (mm): 460
50พบ ผลิตภัณฑ์
JPY: 28,000-
USD: 175.64-
-
Botek Gun Drill Blade Diameter (mm): Φ5.1
24พบ ผลิตภัณฑ์
JPY: 29,000-
USD: 181.91-
-
99 Insert/NC Spot Drill Φd (mm): 10 L (mm): 90 99616-10-SL10
Insert replaceable holder for spot drills.
With the single-blade design, high precision is realized when processing the filet.1พบ ผลิตภัณฑ์
JPY: 13,300
USD: 83.43
-
99 Holder/Engraving Cutter Angle (°): 60Φd (mm): 4 L (mm): 30 L1 (mm): 12 Screw: NS-22044/0.9Nm
3พบ ผลิตภัณฑ์
JPY: 13,200-
USD: 82.80-
-
99 Holder/Corner Radius Φd (mm): 16 L (mm): 100 Z (mm): 1 Screw: NS-35080/2. 5Nm Wrench: NK-T15
3พบ ผลิตภัณฑ์
JPY: 19,000-
USD: 119.18-
-
Maykestag Counter Sink Set Contents: φ 6.3 mm, φ 8.3 mm, φ 10.4 mm, φ 12.4 mm, φ 16.5 mm, φ 20.5 mm 23200000616
Reduces cutting resistance.
Suppresses chatter.1พบ ผลิตภัณฑ์
JPY: 23,400
USD: 146.78
-
Maykestag No. 2320 6 Piece Set AL
12พบ ผลิตภัณฑ์
JPY: 3,900-
USD: 24.46-
-
99 Insert/NC Spot Drill 1 Set (5 Pieces) 8 x 1.25 mm
16พบ ผลิตภัณฑ์
JPY: 21,000-
USD: 131.73-
-
-
99 Insert/Engraving Cutter 1 Set (5 Pieces) K20F ALDURA
6พบ ผลิตภัณฑ์
JPY: 40,000-
USD: 250.91-
-
-
99 Holder/Chamfer Mill Mini 8 x 3.5 x 10 x 60 x 74
3พบ ผลิตภัณฑ์
JPY: 17,100-
USD: 107.26-
-
Dixi NC Center Drill 11068.0
Dixi NC Center Drill 1106 Series.
When mounting the tool to the machine, fix it securely so that it does not become loose or sway.1พบ ผลิตภัณฑ์
JPY: 21,200
USD: 132.98
-
Dixi NC Center Drill 11074.0
Dixi NC Center Drill 1107 Series.
When mounting the tool to the machine, fix it securely so that it does not become loose or sway.1พบ ผลิตภัณฑ์
JPY: 10,000
USD: 62.73
-
Dixi NC Center Drill 11064.0
Dixi NC Center Drill 1106 Series.
When mounting the tool to the machine, fix it securely so that it does not become loose or sway.1พบ ผลิตภัณฑ์
JPY: 10,000
USD: 62.73
-
Dixi NC Center Drill 11063.0
Dixi NC Center Drill 1106 Series.
When mounting the tool to the machine, fix it securely so that it does not become loose or sway.1พบ ผลิตภัณฑ์
JPY: 7,300
USD: 45.79
-
Dixi NC Center Drill 11066.0
Dixi NC Center Drill 1106 Series.
When mounting the tool to the machine, fix it securely so that it does not become loose or sway.1พบ ผลิตภัณฑ์
JPY: 12,400
USD: 77.78
-
[เลิกผลิตแล้ว]สรุปสากล Carbide (สําหรับวัสดุความแข็งแรงสูง, Φ1.0 x Blade 13 x ความยาวรวม 38mm)
23พบ ผลิตภัณฑ์
JPY: 3,000-
USD: 18.82-
-
[Discontinued]MR Carbide Drill φ1.0 TiAlN 2401.0TA
Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.1พบ ผลิตภัณฑ์
JPY: 3,300
USD: 20.70
-
[Discontinued]MR Carbide Drill φ1.1 2401.1
Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.1พบ ผลิตภัณฑ์
JPY: 3,000
USD: 18.82
-
[Discontinued]MR Carbide Drill φ1.2 2401.2
Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.1พบ ผลิตภัณฑ์
JPY: 3,000
USD: 18.82
-
[Discontinued]MR Carbide Drill φ1.3 2401.3
Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.1พบ ผลิตภัณฑ์
JPY: 3,000
USD: 18.82
-
[Discontinued]MR Carbide Drill φ1.4 2401.4
Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.1พบ ผลิตภัณฑ์
JPY: 3,000
USD: 18.82
-
[Discontinued]MR Carbide Drill φ1.6 2401.6
Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.1พบ ผลิตภัณฑ์
JPY: 3,200
USD: 20.07
-
[Discontinued]MR Carbide Drill φ1.7 2401.7
Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.1พบ ผลิตภัณฑ์
JPY: 3,200
USD: 20.07
-
[Discontinued]MR Carbide Drill φ1.8 2401.8
Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.1พบ ผลิตภัณฑ์
JPY: 3,200
USD: 20.07
-
[Discontinued]MR Carbide Drill φ1.9 2401.9
Drilling is also possible on hardened steel of hardness HRC70.
Since there is no need for center drill or reamer work, it demonstrates the best ability for MC and NC.1พบ ผลิตภัณฑ์
JPY: 3,200
USD: 20.07

