ข้อมูลจําเพาะ

• Plug
• MALC-1~12P Type (Screw Fixed Type for Medium Pressure)
• Mass (g): 248
• Dimension (L1) (mm): 41
• Dimension (L2) (mm): (28)
• Dimension (L3) (mm): 13
• Dimension (φD) (mm): 45
• Dimensions (H) (mm): Hex 41
• Dimensions (T) (mm): M35 x 1.5
• Maximum Working Pressure: 5.0 MPa{51kgf/cm2} (Single Unit/2.0 MPa{20kgf/cm2})
• Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
• Applicable fluids: water, hydraulic fluid, air
• Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
• Withstand Pressure: 7.5 MPa{76kgf/cm2} (Single Unit/3.0 MPa{31kgf/cm2})
• Seal Material: Fluororubber (FKM)
• Operating temperature range *: -20 to +180°C
• *The available temperature range depends on the operating conditions.
• Recommended maximum tightening torque: 45 N · m{460kgf · cm}
• Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
• Minimum cross-sectional area: 153 mm2
• Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
• Amount of air mixed at the time of connection: 0.55 mL * Varies depending on operating conditions
• Amount of liquid dripping at the time of separation: 0.55 mL * Varies according to operating conditions
• Maximum connection holding force: 10,000 N{1019kgf}
• Minimum Connection Holding Force Calculated *: P×855+260 N{p×8.55+26kgf}
• *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
•