NITTO KOHKI CO., LTD.

69-8623-96 Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M16 x 1 MALC-1SSUSFKM

คุณลักษณะ

  • Simultaneously connect multiple pipes in one connection operation. Supports medium pressure applications.
  • Compared to conventional "multi-couplers" (MAS and MAT types), the flow rate is approximately twice as large. It contributes to miniaturization of mounting plates. (* The rate of increase of the flow rate depends on the size.)
  • Conventional "multi-couplers" allowed eccentricity up to φ0.6 mm, but the MALC type allowed eccentricity up to φ2 mm.
  • Special valve shape allows pressurized connection up to 2 MPa.
  • Since the dimension between plates when connecting is unified to 30 mm for all sizes, any size can be mounted on the same plate.
  • Liquid dripping and air contamination are suppressed by adopting a dripping reduction valve structure.

ข้อมูลจําเพาะ

  • Socket
  • MALC-1~12 S Model (Medium Pressure Screw Fixing Type)
  • Mass (g): 53
  • Dimension (L1) (mm): (45)
  • Dimension (L2) (mm): (23)
  • Dimension (L3) (mm): 16
  • Dimension (φD) (mm): 21
  • Dimensions (H) (mm): Hex 19
  • Dimensions (T) (mm): M16 x 1
  • Maximum Working Pressure: 7.0 MPa{71kgf/cm2} (Single Unit/2.0 MPa{20kgf/cm2})
  • Valve Structure: Double-Way Open/Close Type (Liquid Dripping Reduction Type)
  • Applicable fluids: water, hydraulic fluid, air
  • Body Material: Stainless Steel (Only Socket Body Surface Treatment/Electroless Nickel Phosphorus Plating)
  • Withstand Pressure: 10.5 MPa{107kgf/cm2} (Single Unit/3.0 MPa{31kgf/cm2})
  • Seal Material: Fluororubber (FKM)
  • Operating temperature range *: -20 to +180°C
  • *The available temperature range depends on the operating conditions.
  • Recommended maximum tightening torque: 20 N · m{204kgf · cm}
  • Compatibility: The socket and plug can be connected in the same size regardless of the mounting shape.
  • Minimum cross-sectional area: 26 mm2
  • Suitable for Vacuum Applications: Cannot be used for vacuum applications, either alone or connected.
  • Amount of air mixed at the time of connection: 0.08 mL * Varies depending on operating conditions
  • Amount of liquid dripping at the time of separation: 0.08 mL * Varies according to operating conditions
  • Maximum connection holding force: 2800 N{286kgf}
  • Minimum Connection Holding Force Calculated *: P×170+85 N{p×1.7+8.5kgf}
  • *Substitute the actual pressure [P (MPa), p (kgf/cm2)]. Use a force greater than the required minimum connection holding force. Do not exceed the maximum connection holding force.
  •  
หมายเลขใบสั่ง 69-8623-96
หมายเลขแบบจําลอง MALC-1SSUSFKM
รหัส JAN 4992338475444
ราคามาตรฐาน JPY: 21,500 USD: 134.77
Excange rate 1USD= 159.53JPY
Valid price in Japan
ปริมาณ 1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์

ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)

รูปภาพผลิตภัณฑ์ หมายเลขใบสั่ง ชื่อ หมายเลขแบบจําลอง ปริมาณ ราคามาตรฐาน ราคาที่ถูกต้องในประเทศญี่ปุ่น หุ้น
[หุ้นซัพพลายเออร์]
69-8623-96 Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M16 x 1 MALC-1SSUSFKM MALC-1SSUSFKM 1piece JPY: 21,500 USD: 134.77

69-8623-97 Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M20 x 1.5 MALC-2SSUSFKM MALC-2SSUSFKM 1piece JPY: 23,900 USD: 149.82

69-8623-98 Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M24 x 1.5 MALC-3SSUSFKM MALC-3SSUSFKM 1piece JPY: 29,200 USD: 183.04

69-8623-99 Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M35 x 1.5 MALC-4SSUSFKM MALC-4SSUSFKM 1piece JPY: 36,200 USD: 226.92

69-8624-01 Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M40 x 2 MALC-6SSUSFKM MALC-6SSUSFKM 1piece JPY: 44,900 USD: 281.45

69-8624-02 Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M45 x 2 MALC-8SSUSFKM MALC-8SSUSFKM 1piece JPY: 56,000 USD: 351.03

69-8624-03 Multi-Coupler MALC Model (Socket) SUS Single Unit Male Screw M60 x 2 MALC-12SSUSFKM MALC-12SSUSFKM 1piece JPY: 139,300 USD: 873.19

ผลิตภัณฑ์ที่เกี่ยวข้อง