คุณลักษณะ

• Supports not only 12 V for passenger cars but also 24 V for trucks
• It is also suitable when you want to keep the batteries of large motorcycles, convertible cars, motorboats, etc. in good condition by trickle charging, which are used less frequently in winter.
• It is easy to operate with the button in the center of the body, and it is small and lightweight, and can be hung on the hood, etc. by using the attached hanger hook.
• Comes with a special bag for convenient storage.
• Supports a variety of lead batteries
• Can be used for liquid type (liquid stopper/flat), gel and AGM.
• Easy operation by pressing the mode select button
• You can select from 6 modes such as 12 V/24 V by simply pressing the mode selection button in the center of the body.
• After selecting the mode, charging starts automatically and the selected mode LED lights up.
• High-intensity LED lights up to show charging progress at a glance
• Depending on the charging status, the LED of different colors will flash or light in four steps up to 25~100% (charging complete).
• Automatic current and voltage control function prevents overcharging
• SmartAMPS technology enables automatic current and voltage control. Prevents overcharging and enables optimal charging without putting a strain on the battery.
• R mode (12 V only/not fast charging)
• If the battery is in a deep discharge state due to the failure to turn off the small lamp or room lamp, it can be recharged at a maximum of 16 V and 1500 mA to restore the capacity and prevent the battery from running out.
• *This function is effective on batteries that have been discharged for a short period of time, and may not be able to recover if the discharge state is long or battery deterioration is severe.
• Abundant safety functions including reverse polarity determination and heat protection
• The LED will notify the reverse connection of plus or minus.
• For heat protection, the output is automatically adjusted when the Charger is hot.
• Charging does not start if charging is not completed within the specified time, if overdischarge or significant deterioration is observed.
• Backup function for battery replacement
• The current is shared to preserve the memory of the vehicle when the battery is replaced.
• *Be sure to insulate and work. Also, ground the negative side to the vehicle body.
• [Changes from BAT-C7]
• Change of LED display of charging progress, Overwrite mode added, Special storage bag added, Shock-resistant function placed at each corner, Charging cable (C30, C70-B) easily discriminated, Simple operation only by pressing mode selection button, Overwrite mode (additional function)
• Improved LED display of charging progress, exclusive specification for Japan, full automatic control of current and voltage, pulse charging mode (dissolution of sulphation), trickle charging mode, R (regeneration) mode (12 V only), backup mode (12 V only, C70 B)
• Reverse polarity determination, overheat protection, safety function, memory function, detachable charging cable clamp, Humber hook
• [Notes]
• *Be sure to read the instruction manual before use.
• *Before use, make sure that the power cable is not damaged.
• *Be sure to turn off the power before installing or removing the Charger.
• *Connect the battery terminal correctly.
• *To avoid electric shock, do not expose the Charger to water.
• *Ensure adequate ventilation during charging to prevent accumulation of explosive gases.
• *This product is for lead batteries only. Please note that this product cannot be used with lithium-ion batteries.