NSK Ltd.

69-0536-42 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2060N1D1008

คุณลักษณะ

  • High speed end deflector system
  • The Compact FA Series was introduced as standard stock to meet various needs.
  • Quiet
  • We have achieved a reduction of 6dB (A), which is equivalent to approximately half of the audibility.
  • Compact
  • The nut outer diameter has been reduced by up to 30% (compared to the manufacturer).
  • A wide range of equipment and devices can be designed to be compact, including a thinner XY table.
  • Fast
  • The maximum allowable rotation speed is 5000min-1, and the range of operating conditions is greatly expanded.
  • Grease nipple included as standard
  • Comes standard with a grease nipple (M5 x 0.8) and has 2 oil filler openings for ease of use. Connection with centralized piping is also easy.
  • storage rail
  • Uses a storage seal, and has a more compact design compared to tube type nuts.
  • low-profile design
  • The compact FA type is equipped with a dedicated low-end support unit, allowing for an unparalleled low-end design.
  • Easy stroke setting
  • By fitting the support side support unit into the outer diameter of the ball screw on the opposite fixed side, flexible stroke installation of the fixed-support structure is possible.
  • A dedicated support unit for the support side is available.

ข้อมูลจําเพาะ

  • Thread Outer Diameter d: 20
  • Lead l: 60
  • Stroke Nominal: 700
  • Stroke Max Lt-L: 764
  • Nut Total Length L: 129
  • Thread Shaft Dimension Lt: 893
  • Thread Shaft Dimension La: 935
  • Thread Shaft Dimension L0:1008
  • Thread Shaft Dimension L1:42
  • Read accuracy target value T: 0
  • Read accuracy error ep: 0.040
  • Read accuracy variation vu: 0.027
  • Basic load rating (N) Dynamic rating Ca: 5900
  • Basic load rating (N) Static rating C0a: 11700
  • Allowable Speed (min-1) Fixed - Supported: 3300
  • Left side shaft end type (anti-drive side): Type II
  • *There is a separate shipping charge for this item.
  •  
หมายเลขใบสั่ง 69-0536-42
หมายเลขแบบจําลอง PSS2060N1D1008
ราคามาตรฐาน JPY: 164,000 USD: 1,028.02
Excange rate 1USD= 159.53JPY
Valid price in Japan
ปริมาณ 1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์

ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)

รูปภาพผลิตภัณฑ์ หมายเลขใบสั่ง ชื่อ หมายเลขแบบจําลอง ปริมาณ ราคามาตรฐาน ราคาที่ถูกต้องในประเทศญี่ปุ่น หุ้น
[หุ้นซัพพลายเออร์]
69-0536-39 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2060N1D0708 PSS2060N1D0708 1piece JPY: 142,000 USD: 890.12

69-0536-40 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2060N1D0808 PSS2060N1D0808 1piece JPY: 150,000 USD: 940.26

69-0536-41 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2060N1D0908 PSS2060N1D0908 1piece JPY: 159,000 USD: 996.68

69-0536-42 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2060N1D1008 PSS2060N1D1008 1piece JPY: 164,000 USD: 1,028.02

69-0536-43 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2060N1D1135 PSS2060N1D1135 1piece JPY: 172,000 USD: 1,078.17

69-0536-44 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2060N1D1335 PSS2060N1D1335 1piece JPY: 183,000 USD: 1,147.12

69-0536-45 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2060N1D1535 PSS2060N1D1535 1piece JPY: 192,000 USD: 1,203.54

69-0536-46 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2060N1D1935 PSS2060N1D1935 1piece JPY: 227,000 USD: 1,422.93

69-0536-47 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS2060N1D2335 PSS2060N1D2335 1piece JPY: 265,000 USD: 1,661.13