69-0535-68 Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1510N1D0361
คุณลักษณะ
- High speed end deflector system
- The Compact FA Series was introduced as standard stock to meet various needs.
- Quiet
- We have achieved a reduction of 6dB (A), which is equivalent to approximately half of the audibility.
- Compact
- The nut outer diameter has been reduced by up to 30% (compared to the manufacturer).
- A wide range of equipment and devices can be designed to be compact, including a thinner XY table.
- Fast
- The maximum allowable rotation speed is 5000min-1, and the range of operating conditions is greatly expanded.
- Grease nipple included as standard
- Comes standard with a grease nipple (M5 x 0.8) and has 2 oil filler openings for ease of use. Connection with centralized piping is also easy.
- storage rail
- Uses a storage seal, and has a more compact design compared to tube type nuts.
- low-profile design
- The compact FA type is equipped with a dedicated low-end support unit, allowing for an unparalleled low-end design.
- Easy stroke setting
- By fitting the support side support unit into the outer diameter of the ball screw on the opposite fixed side, flexible stroke installation of the fixed-support structure is possible.
- A dedicated support unit for the support side is available.
ข้อมูลจําเพาะ
- Thread Outer Diameter d: 15
- Lead l: 10
- Stroke Nominal: 200
- Stroke Max Lt-L: 246
- Nut Total Length L: 43
- Thread Shaft Dimension Lt: 289
- Thread Shaft Dimension La: 304
- Thread Shaft Dimension L0:361
- Thread Shaft Dimension L1:15
- Read accuracy target value T: 0
- Read accuracy error ep: 0.023
- Read accuracy variation vu: 0.018
- Basic load rating (N) Dynamic rating Ca: 5460
- Basic load rating (N) Static rating C0a: 10200
- Allowable Speed (min-1) Fixed - Supported: 5000
- Left side shaft end type (anti-drive side): Type II
| หมายเลขใบสั่ง | 69-0535-68 | |
|---|---|---|
| หมายเลขแบบจําลอง | PSS1510N1D0361 | |
| ราคามาตรฐาน |
JPY: 87,300
USD: 547.23
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
69-0535-62 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1505N1D0361 | PSS1505N1D0361 | 1piece | JPY: 86,900 | USD: 544.73 |
|
|
 |
69-0535-63 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1505N1D0461 | PSS1505N1D0461 | 1piece | JPY: 92,700 | USD: 581.08 |
|
|
 |
69-0535-64 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1505N1D0561 | PSS1505N1D0561 | 1piece | JPY: 99,900 | USD: 626.22 |
|
|
 |
69-0535-65 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1505N1D0661 | PSS1505N1D0661 | 1piece | JPY: 109,000 | USD: 683.26 |
|
|
 |
69-0535-66 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1505N1D0761 | PSS1505N1D0761 | 1piece | JPY: 118,000 | USD: 739.67 |
|
|
 |
69-0535-67 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1510N1D0261 | PSS1510N1D0261 | 1piece | JPY: 82,300 | USD: 515.89 |
|
|
 |
69-0535-68 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1510N1D0361 | PSS1510N1D0361 | 1piece | JPY: 87,300 | USD: 547.23 |
|
|
 |
69-0535-69 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1510N1D0461 | PSS1510N1D0461 | 1piece | JPY: 92,500 | USD: 579.83 |
|
|
 |
69-0535-70 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1510N1D0561 | PSS1510N1D0561 | 1piece | JPY: 98,400 | USD: 616.81 |
|
|
 |
69-0535-71 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1510N1D0661 | PSS1510N1D0661 | 1piece | JPY: 109,000 | USD: 683.26 |
|
|
 |
69-0535-72 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1510N1D0761 | PSS1510N1D0761 | 1piece | JPY: 119,000 | USD: 745.94 |
|
|
 |
69-0535-73 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1510N1D0879 | PSS1510N1D0879 | 1piece | JPY: 126,000 | USD: 789.82 |
|
|
 |
69-0535-74 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1510N1D0979 | PSS1510N1D0979 | 1piece | JPY: 132,000 | USD: 827.43 |
|
|
 |
69-0535-75 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1510N1D1179 | PSS1510N1D1179 | 1piece | JPY: 139,000 | USD: 871.31 |
|
|
 |
69-0535-76 | Nippon Seiko (NSK) Standard Ball Screw (Completed Shaft End Product) Compact FA Series (General Use) PSS PSS1520N1D0261 | PSS1520N1D0261 | 1piece | JPY: 89,500 | USD: 561.02 |
|