68-9420-33 Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 4600N Basic Static Load Cor: 1970N SSXCA6000SH
คุณลักษณะ
- Since it uses SUS440C stainless steel, it is suitable for corrosive environments, clean rooms and food machines.
- It reduces abnormal load on bearings by aligning shaft center errors caused by deflection of shafts such as transfer rollers or improper installation.
- Shield can be used as a sealing device.
- It has many advantages over conventional SUJ2 self-aligning ball bearings.
- Depending on the intended use, low-torque grease, food machine grease, low-dust grease, and other fluorinated chemical-resistant/heat-resistant greases can also be enclosed. In addition, greaseless bearings can be used in vacuum environments and high temperature environments where ordinary grease lubricants are not suitable.
ข้อมูลจําเพาะ
- Seal and Shield: Open
- d(mm):10
- D(mm):30
- B1(mm):9
- B2(mm):15
- B3(mm):15.5
- G(mm):M3
- H(mm):3
- d1(mm):24.7
- d2(mm):14.86
- r Min. (mm): 0.6
- r1 min (mm): 0.3
- Basic dynamic load rating Cr (N): 4600
- Basic static load rating Cor (N): 1970
| หมายเลขใบสั่ง | 68-9420-33 | |
|---|---|---|
| หมายเลขแบบจําลอง | SSXCA6000SH | |
| ราคามาตรฐาน |
JPY: 15,900
USD: 99.67
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
68-9420-33 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 4600N Basic Static Load Cor: 1970N SSXCA6000SH | SSXCA6000SH | 1piece | JPY: 15,900 | USD: 99.67 |
|
|
 |
68-9420-34 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 4600N Basic Static Load Cor: 1970N SSXCA6000ZZSH | SSXCA6000ZZSH | 1piece | JPY: 16,700 | USD: 104.68 |
|
|
 |
68-9420-35 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 5100N Basic Static Load Cor: 2390N SSXCA6001SH | SSXCA6001SH | 1piece | JPY: 16,400 | USD: 102.80 |
|
|
 |
68-9420-36 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 5100N Basic Static Load Cor: 2390N SSXCA6001ZZSH | SSXCA6001ZZSH | 1piece | JPY: 17,500 | USD: 109.70 |
|
|
 |
68-9420-37 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 5600N Basic Static Load Cor: 2840N SSXCA6002SH | SSXCA6002SH | 1piece | JPY: 17,800 | USD: 111.58 |
|
|
 |
68-9420-38 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 5600N Basic Static Load Cor: 2840N SSXCA6002ZZSH | SSXCA6002ZZSH | 1piece | JPY: 18,300 | USD: 114.71 |
|
|
 |
68-9420-39 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 6000N Basic Static Load Cor: 3250N SSXCA6003SH | SSXCA6003SH | 1piece | JPY: 19,900 | USD: 124.74 |
|
|
 |
68-9420-40 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 6000N Basic Static Load Cor: 3250N SSXCA6003ZZSH | SSXCA6003ZZSH | 1piece | JPY: 20,700 | USD: 129.76 |
|
|
 |
68-9420-41 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 9400N Basic Static Load Cor: 5050N SSXCA6004SH | SSXCA6004SH | 1piece | JPY: 23,700 | USD: 148.56 |
|
|
 |
68-9420-42 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 9400N Basic Static Load Cor: 5050N SSXCA6004ZZSH | SSXCA6004ZZSH | 1piece | JPY: 24,800 | USD: 155.46 |
|
|
 |
68-9420-43 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 10100N Basic Static Load Cor: 5850N SSXCA6005SH | SSXCA6005SH | 1piece | JPY: 29,400 | USD: 184.29 |
|
|
 |
68-9420-44 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 10100N Basic Static Load Cor: 5850N SSXCA6005ZZSH | SSXCA6005ZZSH | 1piece | JPY: 30,700 | USD: 192.44 |
|
|
 |
68-9420-45 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 13200N Basic Static Load Cor: 8300N SSXCA6006SH | SSXCA6006SH | 1piece | JPY: 35,300 | USD: 221.28 |
|
|
 |
68-9420-46 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 13200N Basic Static Load Cor: 8300N SSXCA6006ZZSH | SSXCA6006ZZSH | 1piece | JPY: 36,900 | USD: 231.30 |
|
|
 |
68-9420-47 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 5100N Basic Static Load Cor: 2390N SSXCA6200SH | SSXCA6200SH | 1piece | JPY: 16,700 | USD: 104.68 |
|
|
 |
68-9420-48 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 5100N Basic Static Load Cor: 2390N SSXCA6200ZZSH | SSXCA6200ZZSH | 1piece | JPY: 17,800 | USD: 111.58 |
|
|
 |
68-9420-49 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 6800N Basic Static Load Cor: 3050N SSXCA6201SH | SSXCA6201SH | 1piece | JPY: 18,100 | USD: 113.46 |
|
|
 |
68-9420-50 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 6800N Basic Static Load Cor: 3050N SSXCA6201ZZSH | SSXCA6201ZZSH | 1piece | JPY: 19,100 | USD: 119.73 |
|
|
 |
68-9420-51 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 7650N Basic Static Load Cor: 3750N SSXCA6202SH | SSXCA6202SH | 1piece | JPY: 20,500 | USD: 128.50 |
|
|
 |
68-9420-52 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 7650N Basic Static Load Cor: 3750N SSXCA6202ZZSH | SSXCA6202ZZSH | 1piece | JPY: 21,300 | USD: 133.52 |
|
|
 |
68-9420-53 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 9600N Basic Static Load Cor: 4800N SSXCA6203SH | SSXCA6203SH | 1piece | JPY: 23,700 | USD: 148.56 |
|
|
 |
68-9420-54 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 9600N Basic Static Load Cor: 4800N SSXCA6203ZZSH | SSXCA6203ZZSH | 1piece | JPY: 24,800 | USD: 155.46 |
|
|
 |
68-9420-55 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 12800N Basic Static Load Cor: 6650N SSXCA6204SH | SSXCA6204SH | 1piece | JPY: 29,900 | USD: 187.43 |
|
|
 |
68-9420-56 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 12800N Basic Static Load Cor: 6650N SSXCA6204ZZSH | SSXCA6204ZZSH | 1piece | JPY: 31,200 | USD: 195.58 |
|
|
 |
68-9420-57 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 14000N Basic Static Load Cor: 7900N SSXCA6205SH | SSXCA6205SH | 1piece | JPY: 34,700 | USD: 217.51 |
|
|
 |
68-9420-58 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 14000N Basic Static Load Cor: 7900N SSXCA6205ZZSH | SSXCA6205ZZSH | 1piece | JPY: 36,300 | USD: 227.54 |
|
|
 |
68-9420-59 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 19500N Basic Static Load Cor: 11300N SSXCA6206SH | SSXCA6206SH | 1piece | JPY: 40,400 | USD: 253.24 |
|
|
 |
68-9420-60 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 19500N Basic Static Load Cor: 11300N SSXCA6206ZZSH | SSXCA6206ZZSH | 1piece | JPY: 42,300 | USD: 265.15 |
|
|
 |
68-9420-61 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Open Basic Dynamic Load Cr: 6400N Basic Static Load Cor: 3700N SSXCA6904SH | SSXCA6904SH | 1piece | JPY: 24,200 | USD: 151.70 |
|
|
 |
68-9420-62 | Stainless Steel Bearing with Self-Aligning Function (with Set Screw) SH Series Double Shielded Basic Dynamic Load Cr: 6400N Basic Static Load Cor: 3700N SSXCA6904ZZSH | SSXCA6904ZZSH | 1piece | JPY: 25,000 | USD: 156.71 |
|