68-5784-44 CE Type Steel Pipe Penetration Joint Nuts KKN 6 mm KKN06-000CE
คุณลักษณะ
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
ข้อมูลจําเพาะข้อมูลจําเพาะ class="init">
68-5784-44 CE Type Steel Pipe Penetration Joint Nuts KKN 6 mm KKN06-000CE 【AXEL GLOBAL】<!--@[ss-27]@--> アズワン<!--@/[ss-27]@-->
Contact us
IHARA SCIENCE CORPORATION
68-5784-44 CE Type Steel Pipe Penetration Joint Nuts KKN 6 mm KKN06-000CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
仕様
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KKN
- shapes: nuts
- Applicable Pipe Outer Shape A (mm): 6
- D1(mm):7.05
- T(mm):M10×1
- Hex Opposite Side H (mm): 12
- L(mm):12
- Weight (kg): 0.005
-
หมายเลขใบสั่ง
68-5784-44
หมายเลขแบบจําลอง
KKN06-000CE
ราคามาตรฐาน
JPY: 410
USD: 2.55
Excange rate 1USD= 160.72JPY
Valid price in Japan
ปริมาณ
1piece
หุ้นในประเทศญี่ปุ่น
หุ้นซัพพลายเออร์
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
商品イメージ
アズワン品番
商品名
型番
入り数
標準価格
標準価格(ドル)
アズワン在庫
[サプライヤ在庫]
68-5784-44
CE Type Steel Pipe Penetration Joint Nuts KKN 6 mm KKN06-000CE
KKN06-000CE
1piece
JPY: 410
USD: 2.55
68-5784-46
CE Type Steel Pipe Penetration Joint Nuts KKN 8 mm KKN08-000CE
KKN08-000CE
1piece
JPY: 450
USD: 2.80
68-5784-48
CE Type Steel Pipe Penetration Joint Nuts KKN 10 mm KKN10-000CE
KKN10-000CE
1piece
JPY: 490
USD: 3.05
68-5784-50
CE Type Steel Pipe Penetration Joint Nuts KKN 12 mm KKN12-000CE
KKN12-000CE
1piece
JPY: 510
USD: 3.17
68-5784-44 CE Type Steel Pipe Penetration Joint Nuts KKN 6 mm KKN06-000CE
特徴
- CE Type Penetration Joint
- The CE type engagement joint was developed for machine tools and other hydraulic equipment with pressures up to 14 MPa. It is smaller than conventional products and has significantly improved vibration and leak resistance. It can be used not only in hydraulic equipment but also in a wide range of fields such as lubricating oil piping and air piping. NE type bite joints are available for high pressure applications exceeding 13.7 MPa.
- Features of CE Type Penetration Joints
- There is no need for welding, screw machining, flaring, etc., thus reducing piping man-hours.
- The envelope part of the sleeve allows the tube to be precisely centered, greatly reducing problems caused by misalignment, which is considered to be the biggest cause of oil leakage.
- The slitted envelope analyzed by the finite element method improves the anti-vibration fatigue strength by more than 20%. (Compared to the manufacturer) It has been miniaturized to about 75% (volume ratio) of the conventional type, and tightening torque has been reduced by 25~30%, so workability is greatly improved. In addition, the pipe pitch is narrowed to enable compact piping.
仕様
- Series: Penetration Joints for CE Type Steel Pipes
- Type: KKN
- shapes: nuts
- Applicable Pipe Outer Shape A (mm): 6
- D1(mm):7.05
- T(mm):M10×1
- Hex Opposite Side H (mm): 12
- L(mm):12
- Weight (kg): 0.005
| หมายเลขใบสั่ง | 68-5784-44 | |
|---|---|---|
| หมายเลขแบบจําลอง | KKN06-000CE | |
| ราคามาตรฐาน |
JPY: 410
USD: 2.55
Excange rate 1USD= 160.72JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| 商品イメージ | アズワン品番 | 商品名 | 型番 | 入り数 | 標準価格 | 標準価格(ドル) | アズワン在庫 [サプライヤ在庫] |
|
|---|---|---|---|---|---|---|---|---|
|
68-5784-44 | CE Type Steel Pipe Penetration Joint Nuts KKN 6 mm KKN06-000CE | KKN06-000CE | 1piece | JPY: 410 | USD: 2.55 |
|
|
|
68-5784-46 | CE Type Steel Pipe Penetration Joint Nuts KKN 8 mm KKN08-000CE | KKN08-000CE | 1piece | JPY: 450 | USD: 2.80 |
|
|
|
68-5784-48 | CE Type Steel Pipe Penetration Joint Nuts KKN 10 mm KKN10-000CE | KKN10-000CE | 1piece | JPY: 490 | USD: 3.05 |
|
|
|
68-5784-50 | CE Type Steel Pipe Penetration Joint Nuts KKN 12 mm KKN12-000CE | KKN12-000CE | 1piece | JPY: 510 | USD: 3.17 |
|