คุณลักษณะ

• Fills the water leakage part to prevent water intrusion and progress of cracks.
• Suitable for water leakage repair of cracks of 0.5 mm width or less, and can easily prevent water intrusion and progress of cracks just by applying spray.
• It is mainly used for water leakage of external walls (concrete, brick, etc.).
• As it is an aerosol type, it is easy to handle and you can use only the necessary amount and store the rest as it is.
• After drying, it can be applied with water-based paint or oil-based paint.
• Application: For coating and repairing cracks and gaps in concrete, asphalt, iron, brick, etc.
• [How to use]
• Remove sand, dust and oil from the surface to be applied, wash with water if necessary, and then dry thoroughly.
• Paint may scatter over a wide area, so cover the area where paint may stick with masking tape in advance.
• Cracks larger than 0.5 mm should be filled with repairing materials such as putty before construction.
• When using, shake the container thoroughly (for about 30 seconds after you hear the sound of the stirring ball) and mix well. Shake the container occasionally during use and mix the contents well.
• When spraying paint, leave a space of 20~40 cm between the surface to be applied and the spout.
• Test coat on an inconspicuous part, check the color, spray condition, dryness, effect on the base, adhesion, etc., and make sure there are no abnormalities before applying.
• Don't apply a thick coat all at once, move parallel to the surface you want to apply, and apply evenly 2~3 times over the cracked area.
• After use, turn the container upside down and blow it for about 2 seconds so that the spout is blocked. Wipe the spout well and cap it.