คุณลักษณะ

• The wallpaper can be pasted as it is without cutting, so it is easy to work!
• This is an environmentally friendly product that reduces waste by eliminating the backside film and paper tubes.
• Since there is no backside film, it can be applied easily. (No need to peel off the backside film, so it can be spread and attached as it is.)
• Since it is cut to 2.5 m length in advance, it can be applied to the wall of a general house without cutting.
• It is a turnip paper which saves the trouble of removing the turnip paper which is stuck now, and the work is easy.
• Since it is a raw glue type, it can be easily reattached and aligned even if wrinkles or air enter.
• The mould paper and glue are processed to prevent mold growth.
• [Placeable surface] Vinyl cast paper (The product may not adhere sufficiently to highly uneven vinyl leaf paper.) , old turnip paper removed, plywood, plaster walls, concrete, paper turnip paper, decorative plywood (excluding some surface treated products), painted surface, gypsum board, mortar
• [Non-stick surfaces] Highly uneven surfaces, places where water splashes such as in the bathroom, walls exposed to fire such as around the microwave oven, and outside.
• [Surface that can be pasted after the base adjustment]
• ■When applying to a glossy painted surface: Grind the surface with sandpaper (#180 to #280) so that the turnip paper adheres well. Wipe off the shavings thoroughly, and then apply the turnip paper.
• ■When affixing to a steel wall or sand wall
• ① Coat with a "sand wall cover" to harden the base. If the product comes off, remove the sand and sand walls.
• ② After the base has dried sufficiently (after 1 to 2 days), apply the glue super for strong type turnip paper to the four corners (creases) and the wall where the turnip paper will be joined, and attach the paper for supporting the base of the wall-sand wall.
• ③ After drying for more than 1 day, apply the glue super for strong mold paper on the wall side only to the surface where the mold paper is to be applied, and apply the mold paper over it. If you want to paste, repeat the same process.
• *Since the glue on the reverse side is insufficient for adhesion, be sure to apply glue super for strong type turnip paper to the wall side.
• *Please note that if you apply the glue super for strong type turnip paper all at once, it will dry and become impossible to apply.
• *Depending on the degree of unevenness of the base, unevenness of the base may appear on the surface of the turnip paper. When pasting this product on a wall, etc., we recommend that you choose thick turnip paper that does not show unevenness.