67-5266-12 Digital Torque Wrench Measurement Range 0.01 N/m CES10NX8D
คุณลักษณะ
- Suitable for tightening management of low torque areas such as resin and light metal products.
- Can be used in places where it is difficult to tighten with a screwdriver due to height limitation.
- Prevention of leakage of defective screw tightening by monitoring torque and angle
- Send and receive data wirelessly to manage tightening order, conditions, and lines (optional)
- [Application]
- For tightening and inspecting low-torque areas such as cable ground, resin screws and ceramic screws.
- For narrow areas where it is difficult to tighten with torque drivers or conventional torque wrenches due to height restrictions.
- For tightening delicate parts such as sensors and semiconductor manufacturing equipment.
- [Notes]
- Charger (BC-3 G) is sold separately.
- Image 1 shows the ratchet head QH6D (accessories) connected to the CES5NX6D.
ข้อมูลจําเพาะ
- Torque Measuring Range (N.m) Minimum to Maximum: 1~1.99 (Torque Accuracy ±2%) 2~10 (Torque Accuracy ±1%) Torque Measuring Range (N.m)1 Memory: 0.01
- Total length (mm): 197.5
- Effective length (mm): 172
- Angular accuracy: ±2°+1digit (when rotated 90° at 30~180°/s)
- Display: LCD/measured value (Torque, Angle, Units), counter 4 digits, battery level display 4 levels, antenna mark (optional) LED/pass/fail judgment
- Data memory: 1000 data (Torque, angle, pass/fail decision result)
- Data output: USB Type-C connector, Bluetooth (optional) Communication mode: Classic (SPP), BLE
- Basic functions: Peak hold, measurement data memory, auto memory reset, inspection mode/tightening mode changeover, tightening completion alarm, pass/fail judgment, detection of double tightening, Auto Zero, Auto Power Off, Overtorque alarm
- Power Supply: Nickel-Metal Hydride Battery
- Continuous use time: Approximately 20 hours (with optional Bluetooth connection: Approximately 8 hours)
- Charging time: Approx. 3.5 hours
- Operating Temperature Range: 0~40°C (No Condensation)
| หมายเลขใบสั่ง | 67-5266-12 | |
|---|---|---|
| หมายเลขแบบจําลอง | CES10NX8D | |
| รหัส JAN | 4580135825618 | |
| ราคามาตรฐาน |
JPY: 123,800
USD: 776.57
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
67-5266-11 | Digital Torque Wrench Measurement Range 0.005 N/m CES5NX6D | CES5NX6D | 1piece | JPY: 133,700 | USD: 838.67 |
|
|
 |
67-5266-12 | Digital Torque Wrench Measurement Range 0.01 N/m CES10NX8D | CES10NX8D | 1piece | JPY: 123,800 | USD: 776.57 |
|