67-5194-83 Limit SW Type Torque Wrench Head Replaceable L100.5 with Manufacturer Calibration Certificate + Tolerability System Diagram QLLS140N
คุณลักษณะ
- This product comes with a set of a calibration certificate (with inspection results) and a traceability system diagram.
- Wired type torque wrench with limit switch.
- When the set torque is reached, the toggle is activated and a contact signal is output from the limit switch at the same time.
- Combination with optional count checker (CNA -4mk 3) makes Pokayoke system easy.
- The signal from the limit switch is taken into the PLC, etc., and the tightening guarantee system is created by interlocking with the line.
- LS cord uses curl cord with excellent durability.
- Head Replaceable Torque Wrench. TONICHI's "replacement head," which boasts a large assortment, can be used.
ข้อมูลจําเพาะ
- Dimension L (mm): 100.5
- Weight: 0.96 kg
- Use: Pokayoke (to prevent forgetting to tighten)
- Notes
- When you place an order, you need the name of the company you use the product from.
- The name of the company used is not mentioned in the calibration certificate and the traceability system diagram.
- The delivery date will be after confirming the name of the company using the product.
- Cancellation or return after order is not allowed.
- Limit switches are rated below 30 VAC/DC and 1 A.
- The female connector is not attached to the LS cord.
| หมายเลขใบสั่ง | 67-5194-83 | |
|---|---|---|
| หมายเลขแบบจําลอง | QLLS140N | |
| ราคามาตรฐาน |
JPY: 60,500
USD: 379.50
Excange rate 1USD= 159.42JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
67-5194-82 | Limit SW Type Torque Wrench Head Replaceable L80.5 with Manufacturer Calibration Certificate + Tolerability System Diagram QLLS100N4 | QLLS100N4 | 1piece | JPY: 55,300 | USD: 346.88 |
|
|
 |
67-5194-83 | Limit SW Type Torque Wrench Head Replaceable L100.5 with Manufacturer Calibration Certificate + Tolerability System Diagram QLLS140N | QLLS140N | 1piece | JPY: 60,500 | USD: 379.50 |
|
|
 |
67-5194-84 | Limit SW Type Torque Wrench Head Replaceable L178.5 with Manufacturer Calibration Certificate + Tolerability System Diagram QLLS200N4 | QLLS200N4 | 1piece | JPY: 63,700 | USD: 399.57 |
|
|
 |
67-5194-85 | Limit SW Type Torque Wrench Head Replaceable L33.5 with Manufacturer Calibration Certificate + Tolerability System Diagram QLLS25N5 | QLLS25N5 | 1piece | JPY: 53,100 | USD: 333.08 |
|
|
 |
67-5194-86 | Limit SW Type Torque Wrench Head Replaceable L248.5 with Manufacturer Calibration Certificate + Tolerability System Diagram QLLS280N | QLLS280N | 1piece | JPY: 77,100 | USD: 483.63 |
|
|
 |
67-5194-87 | Limit SW Type Torque Wrench L498.5 with Manufacturer Calibration Certificate + Tolerability System Diagram QLLS420N | QLLS420N | 1piece | JPY: 99,100 | USD: 621.63 |
|
|
 |
67-5194-88 | Limit SW Type Torque Wrench Head Replaceable L48.5 with Manufacturer Calibration Certificate + Tolerability System Diagram QLLS50N | QLLS50N | 1piece | JPY: 54,900 | USD: 344.37 |
|
|
 |
67-5194-89 | Limit SW Type Torque Wrench L31.5 with Manufacturer Calibration Certificate + Tolerability System Diagram QLMS15N | QLMS15N | 1piece | JPY: 54,700 | USD: 343.12 |
|
|
 |
67-5194-90 | Limit SW Type Torque Wrench L31.5 with Manufacturer Calibration Certificate + Tolerability System Diagram QLMS15N-MH | QLMS15N-MH | 1piece | JPY: 48,600 | USD: 304.86 |
|