67-4913-77 Solid Electrolyte System With Maseries Wall-Mounted Co2 Monitor Control Function 4~20 Ma 0.01~10.00% MA5002-10
คุณลักษณะ
- Constant monitoring of CO2 concentration for environmental management
- This wall-mounted CO2 monitor uses solid electrolyte or infrared absorption as the sensor detection method, and is equipped with digital display of measured values and analog output signals.
- Models with control functions equipped with relay outputs for CO2 concentration control are also available.
- Since it is not affected by high humidity * and atmospheric pollution, it is excellent for air measurement in semi-free space, etc.
- * Continuous operation is required.
- Main Use
- Control and control of CO2 concentration in grain and fruit storage
- Control and control of CO2 concentration in plant cultivation facilities
- Air Quality Control in Food Freezing and Refrigeration Processes
- Air quality management in offices, meeting rooms, schools, and other spaces where people gather
- Gas leak monitoring of CO2 fire extinguishing equipment
ข้อมูลจําเพาะ
- Model: With Control Function
- Measurement Method: Lithium Ion Solid Electrolyte Method
- Transmission signal: 4~20 mA DC
- Measuring range: 0.01~10.00%
- Response time: 120 seconds or less (90% response)
- Measurement value display: 4 digits (digital display with red LED)
- Resolution: 0.01% (less than 1.0%)/0.1% (more than 1.0%)
- Accuracy rating: < 1.0%/±10%±0.01% of measured value, ≥ 1.0%/±10%±0.1% of measured value
- Reproducibility: +/- 2% of measured value
- Temperature dependence: +/- 3% of measured value
- Barometric pressure dependence: 0.1% of measured value/hPa
- Load resistance: 400 Ω or less
- Warm-up time: About 30 minutes
- Correction: 1-point correction of inspection gas by special inspection kit (sold separately)
- Operating Temperature/Humidity Range: 0~45°C/0~95%RH (No Condensation)
- Power: 100 VAC ±10%, 50/60Hz
- Power Consumption: Approx. 8VA
- control function
- Setting range (step): 0.02~0.99% (0.01%), 1.0~10.0% (0.1%)
- Control mode: normal operation/reverse operation can be switched
- Control dead zone: optional 0.01% or 0.1%
- control output
- LED lamp lights when control signal is output.
- Relay contact output: 1 circuit a contact
- Contact Capacity: Resistance Load (250 V AC, 3 A/30 V DC, 3 A), Induction Load (250 V AC, 1 A/30 V DC, 1 A)
- Device abnormality: Error display when device abnormality or heater disconnection, control output off
- ISO 14001 Certified JQA-EM2414
- ISO 9001 Certification JQA-0656
ขนาดแพ็คเกจ：120×55×120 mm 430 g [เกี่ยวกับขนาดแพ็คเกจ]
| หมายเลขใบสั่ง | 67-4913-77 | |
|---|---|---|
| หมายเลขแบบจําลอง | MA5002-10 | |
| รหัส JAN | 4562208230185 | |
| ราคามาตรฐาน |
JPY: 117,000
USD: 733.40
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
 |
67-4913-72 | Maseries Solid Electrolyte System With Wall-Mounted Co2 Monitor Control Function 1~5 V 100~5000Ppm MA5001-00 | MA5001-00 | 1piece | JPY: 117,000 | USD: 733.40 |
|
|
 |
67-4913-74 | Maseries Solid Electrolyte System With Wall-Mounted Co2 Monitor Control Function 1~5 V 0.01~10.00% MA5001-10 | MA5001-10 | 1piece | JPY: 117,000 | USD: 733.40 |
|
|
 |
67-4913-77 | Solid Electrolyte System With Maseries Wall-Mounted Co2 Monitor Control Function 4~20 Ma 0.01~10.00% MA5002-10 | MA5002-10 | 1piece | JPY: 117,000 | USD: 733.40 |
|
|
 |
67-4913-79 | Maseries Wall-Mounted Co2 Monitor Control Function Infrared Absorption 1~5 V 0~5000Ppm MA5101-00 | MA5101-00 | 1piece | JPY: 117,000 | USD: 733.40 |
|
|
 |
67-4913-80 | Maseries Wall-Mounted Co2 Monitor Control Function Infrared Absorption 4~20 Ma 0~5000Ppm MA5102-00 | MA5102-00 | 1piece | JPY: 117,000 | USD: 733.40 |
|