67-4913-68 Maseries Solid Electrolyte System With Wall-Mounted Co2 Monitor Alarm Function 4~20 Ma 0.01~10.00% MA1002-10
คุณลักษณะ
- Constant monitoring of CO2 concentration for environmental management
- This wall-mounted CO2 monitor uses solid electrolyte or infrared absorption as the sensor detection method, and is equipped with digital display of measured values and analog output signals.
- Since it is not affected by high humidity * and atmospheric pollution, it is excellent for air measurement in semi-free space, etc.
- * Continuous operation is required.
- Main Use
- Control and control of CO2 concentration in grain and fruit storage
- Control and control of CO2 concentration in plant cultivation facilities
- Air Quality Control in Food Freezing and Refrigeration Processes
- Air quality management in offices, meeting rooms, schools, and other spaces where people gather
- Gas leak monitoring of CO2 fire extinguishing equipment
ข้อมูลจําเพาะ
- Model: With Alarm Function
- Measurement Method: Lithium Ion Solid Electrolyte Method
- Transmission signal: 4~20 mA DC
- Measuring range: 0.01~10.00%
- Response time: 120 seconds or less (90% response)
- Measurement value display: 4 digits (digital display with red LED)
- Resolution: 0.01% (less than 1.0%)/0.1% (more than 1.0%)
- Accuracy rating: < 1.0%/±10%±0.01% of measured value, ≥ 1.0%/±10%±0.1% of measured value
- Reproducibility: +/- 2% of measured value
- Temperature dependence: +/- 3% of measured value
- Barometric pressure dependence: 0.1% of measured value/hPa
- Load resistance: 400 Ω or less
- Warm-up time: About 30 minutes
- Correction: 1-point correction of inspection gas by special inspection kit (sold separately)
- Operating Temperature/Humidity Range: 0~45°C/0~95%RH (No Condensation)
- Power: 100 VAC ±10%, 50/60Hz
- Power Consumption: Approx. 8VA
- Alarm settings
- One upper limit and one lower limit are set arbitrarily (Back cover key operation).
- Setting range (step): 0.01~10.00% (0.01%)
- Optional selection of upper/lower limit alarm operation
- With/without buzzer sound output is optional (both upper and lower limits).
- Alarm output
- Upper/lower limit individual LED lights on
- Relay Contact Output: One Upper/Lower Circuit a Contact
- Contact Capacity: Resistance Load (110 V AC, 0.2 A/24 V DC, 1 A), Induction Load (110 V AC, 0.1 A/24 V DC, 0.5 A)
- Device abnormality: Error display when device abnormality or heater disconnection, upper and lower limit LED lamp lights up, upper and lower limit relay output
- ISO 14001 Certified JQA-EM2414
- ISO 9001 Certification JQA-0656
ขนาดแพ็คเกจ:120×55×120 mm 430 g [เกี่ยวกับขนาดแพ็คเกจ]
| หมายเลขใบสั่ง | 67-4913-68 | |
|---|---|---|
| หมายเลขแบบจําลอง | MA1002-10 | |
| รหัส JAN | 4562208230109 | |
| ราคามาตรฐาน |
JPY: 117,000
USD: 733.40
Excange rate 1USD= 159.53JPY
Valid price in Japan |
|
| ปริมาณ | 1piece | |
| หุ้นในประเทศญี่ปุ่น |
|
|
| หุ้นซัพพลายเออร์ |
|
|
ผลิตภัณฑ์ที่เกี่ยวข้อง (ขนาดที่แตกต่างกัน, ข้อมูลจําเพาะ,ผลิตภัณฑ์ตัวเลือก ฯลฯ)
| รูปภาพผลิตภัณฑ์ | หมายเลขใบสั่ง | ชื่อ | หมายเลขแบบจําลอง | ปริมาณ | ราคามาตรฐาน | ราคาที่ถูกต้องในประเทศญี่ปุ่น | หุ้น [หุ้นซัพพลายเออร์] |
|
|---|---|---|---|---|---|---|---|---|
![]() |
67-4913-65 | Maseries Solid Electrolyte System With Wall-Mounted Co2 Monitor Alarm Function 1~5 V 0.01~10.00% MA1001-10 | MA1001-10 | 1piece | JPY: 117,000 | USD: 733.40 |
|
|
![]() |
67-4913-68 | Maseries Solid Electrolyte System With Wall-Mounted Co2 Monitor Alarm Function 4~20 Ma 0.01~10.00% MA1002-10 | MA1002-10 | 1piece | JPY: 117,000 | USD: 733.40 |
|
|
![]() |
67-4913-70 | Maseries Wall-Mounted Co2 Monitor With Alarm Function Infrared Absorption 1~5 V 0~5000Ppm MA1101-00 | MA1101-00 | 1piece | JPY: 117,000 | USD: 733.40 |
|
|
![]() |
67-4913-71 | Maseries Wall-Mounted Co2 Monitor With Alarm Function Infrared Absorption 4~20 Ma 0~5000Ppm MA1102-00 | MA1102-00 | 1piece | JPY: 117,000 | USD: 733.40 |
|










